Ultrafast all optical modulation based on intersubband transition in semiconductor quantum wells

Ultrafast modulation of interband-resonant light by intersubband-resonant light in n-doped GaAs/AlGaAs and GaN/AlGaN quantum wells was investigated by femtosecond pump-probe technique. A planar-type AlGaAs/GaAs modulation device shows a modulation speed of ～1 ps at room temperature. The observed modulation efficiency indicates that 99% modulation can be achieved with a control pulse energy of ～1 pJ when a waveguide-type device structure is utilized. The feasibility of the all-optical modulation in GaN/AlGaN quantum wells is also investigated. The intersubband carrier relaxation time, which mainly determines the modulation speed, is measured and is found to be extremely fast (130–170 fs). The results indicate that the optical modulation at a bit rate of over 1 Tb/s will be possible by utilizing the intersubband transition in GaN/AlGaN quantum wells. The modulation efficiency in GaN/AlGaN quantum wells is also discussed in comparison with that in GaAs/AlGaAs quantum wells.     

The crystal structure of 1,4-benzenedithiol by rietveld analysis and studies on the mechanism of solid-state addition polymerization of 1,4-benzenedithiol to 1,4-diethynylbenzene

The crystal structure of 1,4-benzenedithiol (BDT) was determined by the Rietveld method based on the calculation of the atomic coordinates of the BDT molecule using the Molecular Mechanics Program (MMP2). The refined crystal structure of BDT was monoclinic P₂₁/c with dimensions, a = 7.795, b = 7.290, c = 5.955 Å, β = 92.16°, z = 2. The R factor of the refined structure was 0.038. Using above results, the mechanism of solid-state addition polymerization of BDT to 1,4-diethynylbenzene (DEB) was studied. Sublimed BDT piles up onto glass plate substrate and forms the layer structure along with the a axis. An inclination angle of the piled BDT column was 60° toward the substrate surface. DEB crystal structure was also monoclinic P₂₁/c with a = 4.007, b = 6.018; c = 15.340 Å, β = 91.42°, z = 2. Sublimation of equimolar mixture of BDT and DEB gave a crystal having 1 : 1 composition, in which DEB column is situated between the columns of BDT. Relative arrangement of both monomers was suitable for the addition of  SH and  CCH groups, since the distance between the two groups is 3.3 Å by CERIUS II calculation. Therefore, the addition polymerization of BDT to DEB easily proceeded by UV irradiation and the resulting polymer had a highly layer structure along with the a axis of BDT crystal. Tentatively estimated crystal structure of polymer obtained is monoclinic with a = 7.73, b = 7.30, c = 5.95 Å, β = 92.16°. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 1621–1625, 1997     

Preoperative Physical Inactivity Affects the Postoperative Course of Surgical Patients with Lung Cancer

Objective: Preoperative performance status is an important factor in thoracic surgery, but little is known about the effect of preoperative physical activity (PA) on the postoperative course. This study investigated the associations between preoperative PA and postoperative complications and clinical outcomes of lung cancer surgery. Methods: This prospective observational study included patients who underwent surgery for lung cancer at a single institution. PA was measured before hospitalization for 5 consecutive days and then after surgery until hospital discharge. The daily step count and time spent performing moderate intensity activity (> 3 metabolic equivalents) were measured with an accelerometer. We examined the correlations between PA and preoperative pulmonary function and physical fitness, and examined the relationship between postoperative complication and PA. Finally, a multivariate analysis was performed with pre-hospital PA as the dependent variable. Results: Forty-two patients were analyzed. Univariate analysis found no correlation between pre-hospital PA and preoperative pulmonary function, but found significant positive correlations between pre-hospital PA and time spent performing moderate intensity activity, in-hospital PA, preoperative 6-minute walk distance, and maximum gait speed (r > 0.5, p < 0.01). The nine patients who developed postoperative complications had significantly lower pre-hospital and postoperative step count than the patients with no complication (p = 0.04). Multiple regression analysis showed that pre-hospital PA was significantly associated with time spent performing moderate intensity activity, maximum gait speed, and postoperative complication. Conclusions: Evaluation of pre-hospital PA is useful in predicting the postoperative course after lung cancer surgery.     

Living cationic polymerization of vinyl ethers in the presence of added bases: Recent advances

The living cationic polymerization of vinyl ethers was carried out with organoaluminum compounds in the presence of various types of esters and ethers (cyclic and acyclic), to find out the suitable added bases available for the living polymerization. The effects of the basicity and steric hindrance of added bases were investigated in detail. On the basis of these results, a fast living polymerization system was realized. To synthesize water-soluble polymers such as thermally-induced phase separating polymers and polyalcohols with well-defined polymer structure, the living polymerization of various vinyl ethers was examined. The aqueous solution of living poly(vinyl ethers) having oxyethylene units exhibited a quite sensitive (ΔT_ps=0.3–0.5°C) and reversible phase separation on heating and cooling. The effects of polymer structures (pendant substituent, polymer sequence, molecular weight, and MWD) on the phase separation behavior were investigated. PVA and block copolymers containing PVA units with a narrow MWD were also prepared via living cationic polymerization of vinyl ethers and a deprotection reaction.     

Copolymerization of vinyl monomers with Gd(OCOCCl3)3-(i-Bu)3Al-Et2AlCl

The polymerization of polar monomers such as methyl methacrylate (MMA), methyl acrylate (MA), methacrylonitrile (MAN), and acrylonitrile (AN) was carried out with gadolinium-based Ziegler–Natta catalysts [Gd(OCOCCl₃)₃-(i-Bu)₃Al-Et₂AlCl] in hexane at 50°C under N₂ to elucidate the effect of the monomer's HOMO(highest occupied moleculor orbital) and LUMO (lowest unoccupied molecular orbital) levels on the polymerizability. In the case of homopolymerization, all monomers were found to polymerize and the order of relative polymerizability was as follows: MM > MA > MAN > AN. On the other hand, the result of copolymerization of St with MMA shows that the values of the monomer reactivity ratios are r₁ = 0.06 and r₂ = 1.98 for St(M₁)/MMA(M₂). The monomer reactivity ratios of styrene (St), p-methoxystyrene (PMOS), p-methylstyrene (PMS), and p-chlorostyrene (PCS) evaluated as r₁ = 0.55 and r₂ = 1.07 for St(M₁)/PMOS(M₂), r₁ = 0.38 and r₂ = 0.51 for St(M₁)/PMS(M₂), and r₁ = 0.72 and r₂ = 1.25 for St(M₁)/PCS(M₂) were compared with those for St(M₁)/MMA(M₂). The copolymerization behavior is apparently different from the titanium-based Ziegler—Natta catalyst, regarding a larger monomer reactivity ratio of PCS. The lower LUMO level of PCS and MMA may enhance a back-donation process from the metal catalyst, therefore resulting in high polymerizability. These results are discussed on the basis of the energy level of the gadolinium catalyst and the HOMO and LUMO levels of the monomers. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 2591–2597, 1997     

Copolymerization of dienes with neodymium tricarboxylate-based catalysts and cis-polymerization mechanism of dienes

It was found that poly(butadiene), poly(isoprene), and poly(2,3-dimethylbutadiene) with high cis-1,4 content were obtained with Nd(OCOR)₃–(i-Bu)₃Al–Et₂AlCl catalysts (R = CF₃, CCl₃, CHCl₂, CH₂Cl, CH₃) in hexane at 50°C [cis-1,4 content: poly(BD), > 98%; poly(IP), ≥ 96%; poly(DMBD), ≥ 94%]. Copolymerization of IP and styrene (St) was carried out at various monomer feed ratios to evaluate the monomer reactivity ratio and cis-1,4 content of the diene unit and then to elucidate the cis-1,4 polymerization mechanism of IP. The cis-1,4 content of the IP unit in the copolymers decreased with increasing St content in the copolymers. The cis-1,4 polymerization was disturbed by incorporating St unit in the copolymers, since the penultimate St unit hardly coordinates to the neodymium metal, resulting in a decrease of the cis-1,4 content in the copolymers. That is, the cis-1,4 polymerization of IP is suggested to be controlled by a back-biting coordination of the penultimate diene unit. On the other hand, in the case of poly(BD-co-IP) and poly(BD-co-DMBD), the cis-1,4 content of the BD, IP, and DMBD units in the copolymers was almost constant (cis: 94–98%), irrespective of the monomer feed ratios and polymerization temperature. Consequently, the penultimate IP and DMBD units favorably control the terminal BD, IP, or DMBD unit to the cis-1,4 configuration through the back-biting coordination. For the monomer reactivity ratios, a clear difference was observed in each system: r_BD = 1.22, r_IP = 1.14; r_BD = 40.9, r_DMBD = 0.15. Low polymerizability of DMBD was mainly ascribed to the steric effect of the methyl substituents. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1707–1716, 1998     

Homo- and copolymerization of butadiene and styrene with neodymium tricarboxylate catalysts

Homo- and copolymerizations of butadiene (BD) and styrene (St) with rare-earth metal catalysts, including the most active neodymium (Nd)-based catalysts, have been examined, and the cis-1,4 polymerization mechanism was investigated by the diad analysis of copolymers. Polymerization activity of BD was markedly affected not only by the ligands of the catalysts but also by the central rare-earth metals, whereas that of St was mainly affected by the ligands. In the series of Nd-based catalysts [Nd(OCOR)₃:R = CF₃, CCl₃, CHCl₂, CH₂Cl, CH₃], Nd(OCOCCl₃)₃ gave a maximum polymerization activity of BD, which decreased with increasing or decreasing the pKa value of the ligands. This tendency was different from that for Gd(OCOR)₃ catalysts, where the CF₃ derivative led to the highest polymerization activity of BD. For the polymerization of St and its copolymerization with BD, the maximum activities were attained at R = CCl₃ for both Nd- and Gd-based catalysts. The copolymerization of BD and St with Nd(OCOCCl₃)₃ catalyst was also carried out at various monomer feed ratios, to evaluate the monomer reactivity ratios as r_BD = 5.66 and r_St = 0.86. The cis-1,4 content in BD unit decreased with increasing St content in copolymers. From the diad analysis of copolymers, it was indicated that Nd(OCOCCl₃)₃ catalyst controls the cis-1,4 structure of the BD unit by a back-biting coordination of the penultimate BD unit. Furthermore, the long range coordination of polymer chain by the neodymium catalyst was suggested to assist the cis-1,4 polymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 241–247, 1998     

Ethene–propene copolymerization with the MgCl2-supported dichlorobis(4,4,4-trifluoro-1-phenyl- 1,3-butanedionato)titanium catalyst activated by an ordinary trialkylaluminum

The Ti(BFA)₂Cl₂/MgCl₂–Al(C₂H₅)₃ catalyst (BFA = 4,4,4-trifluoro-1-phenyl-1,3-butanedione) modified by DIPDMS (diisopropyldimethoxysilane), which had been proved to yield an extremely high isotactic polypropene in high selectivity, was tested for the copolymerization of ethene with propene. The analysis of resulting copolymers by CFC (cross fractionation chromatography) indicated the formation of a small quantity of ethene-rich copolymers as a byproduct, suggesting that the catalyst possesses not only Ti(III) species but a small portion of Ti(II) species. Whereas, the same catalyst without being modified by an external donor selectively yielded propene-rich random copolymers resulting from Ti(III) species in high yields. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2735–2740, 1998