Spectroscopic imaging techniques for characterization of polymer morphologies: a combination of infrared and electron microscopy

The morphological characterization of polymer blends consisting of polyamide and poly(tetrafluoroethylene) using FT-IR spectroscopy and electron microscopy is described. To enhance the lateral resolution - one of the main limits in infrared spectroscopy - a combination with scanning electron microscopy and analytical electron microscopic methods of a transmission electron microscope was made. The possibilities of electron energy loss spectroscopy and energy filtered transmission electron microscopy (EFTEM) in the area of polymer characterization are outlined.     

The effect of specific nucleation on molecular and supermolecular orientation in isotactic polypropylene

The molecular and supermolecular orientation, morphology and structural changes observed during cold drawing of injection moulded isotactic polypropylene modified by specific α, and β nucleating agents were studied by polarised photoacoustic FTIR spectroscopy, wide-angle X-ray diffraction and differential scanning calorimetry. Significantly lower molecular orientation was found in the core of the β-nucleated injection moulded specimens as compared to unmodified and α-nucleated materials. This has been ascribed to the fast growth of the β-crystallites which inevitably dislocates the flow-induced orientation within the crystalline regions and in their vicinity. Moreover, it was found that the presence of the developed β-crystallites distinctly diminishes the efficiency of the orientational solid-state drawing assessed on both levels of the hierarchical structure (molecular and crystalline). This structural observation is directly connected with macroscopic softening effect of the β-phase: lowering the yield stress and flattening the neck shoulder. Thus, the interrelation between the microstructural and macroscopic effects of the β-phase could be described as a feedback process.     

Preparation and properties of thin films of hyperbranched polyesters with different end groups

Hyperbranched polyesters (HBP) with different end groups were prepared as thin films. They were characterized with regard to their chemical composition, thickness, optical constants and morphology using infrared spectroscopy, spectroscopic ellipsometry, and atomic force microscopy. The surface properties of the films were determined by zeta‐potential and contact angles measurements. The differences in the molecular structure and surface energetic and acid‐base properties between HBP materials with carboxylic, hydroxy and acetoxy end groups result in differences in their swelling behavior in atmospheric humidity. The swelling behavior at different atmospheric humidity was observed in situ using spectroscopic ellipsometry and reflectometric interference spectroscopy. From the results it can be concluded that HBP films can be used potentially as sensoric materials.     

Hierarchy of Order in Liquid Crystalline Polycaps

When outfitted with long alkyl chains , polycaps, capsules along a polymer chain, spontaneously organize themselves into a two-dimensional liquid crystalline phase. Further organization results from shearing or pulling the liquid crystalline samples, producing three-dimensional assemblies of micrometer-wide, infinitely long fibers (see schematic representation).     

Characterization of a poly(ethersulphone) by on-line coupling of size exclusion chromatography with NMR and FTIR spectroscopy

An on-line detection „on the flow”︁ during the size exclusion chromatography run using FTIR and NMR spectrometers was applied to investigate the liquid chromatographic separation process of oligomers and to identify the separated chromatographic compounds. The FTIR and NMR detectors give real-time information about the chemical structure and functional groups of the eluated species. The preferences and limits of the on-line coupling were discussed using an oligomeric hydroxyl terminated poly(ethersulphone) as an example. Molecular weights could be calculated from the ¹H-NMR spectra of the separated species using the intensities of end-group and main-chain signals. Residues of N-methylpyrrolidone which was used as solvent in the oligomer synthesis were identified by the FTIR detector.     

The shear modulus of the human vocal fold in a transverse direction

The aim of this study was to measure the shear modulus of the vocal fold in a human hemilarynx, such that the data can be related to direction of applied stress and anatomical context. Dynamic spring rate data were collected using a modified linear skin rheometer using human hemilarynges, and converted to estimated shear modulus via application of a simple shear model. The measurement probe was attached to the epithelial layer of the vocal fold cover using suction. A sinusoidal force of 3g was applied to the epithelium, and the resultant displacement logged at a rate of 1kHz. Force measurement accuracy was 20microg and position measurement accuracy was 4microm. The force was applied in a transverse direction at the midmembranous point between the vocal process and the anterior commissure. The shear modulus of the three female vocal folds ranged from 814 to 1232Pa. The shear modulus of the three male vocal folds ranged from 1021 to 1796Pa. These data demonstrate that it is possible to obtain estimates for the shear modulus of the vocal fold while preserving anatomical context. The modulus values reported here are higher than those reported using parallel plate rheometry. This is to be expected as the tissue is attached to surrounding structures, and is under natural tension.     

Thermal lens effects in an Er<Superscript>3+</Superscript>:YAG laser with crystalline fiber geometry

A resonantly diode-pumped high-power continuous-wave Er³⁺:YAG laser with a crystalline fiber geometry based on total-internal-reflection pump guiding is reported. Up to 9.4 W of output power could be generated and a slope efficiency of 46.8% was achieved. Intrinsic efficiencies reached up to 48.8% and an optimum outcoupling of ∼20% was found. A strong thermal lens was observed and cavity stability and hysteresis effects were studied.     

Using the solvation parameter model to characterize functionalized ionic liquids containing the tris(pentafluoroethyl)trifluorophosphate (FAP) anion

Ionic liquids (ILs) containing the tris(pentafluoroethyl)trifluorophosphate anion [FAP]⁻ have attracted increased attention due to their unique properties including ultrahigh hydrophobicity, hydrolytic stability, and wide electrochemical window. In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. The role of the functional groups, nature of the counter anion, and cation type on the system constants were evaluated. ILs containing [FAP]⁻ possessed lower hydrogen bond basicity than NTf₂-based ILs having the same cationic component; in the case of hydroxyl-functionalized cations, the presence of [FAP]⁻ led to an enhancement of the hydrogen bond acidity, relative to the NTf₂-analogs. The system constants support the argument that [FAP]⁻ weakly coordinates the cation and any appended functional groups, promoting properties of the cation which might be masked by stronger interactions with other anion systems. The chromatographic performance of the IL stationary phases was evaluated by examining the retention behavior and separation selectivity for chosen analytes. The results from this work can be used as a guide for choosing FAP-based ILs capable of exhibiting desired solvation properties while retaining important physical properties including high thermal stability and high hydrophobicity. Figure In this study, the solvation parameter model is used via gas chromatography to characterize the solvation interactions of seven ILs containing amino, ester, and hydroxyl functional groups appended to the cation and paired with tris(pentafluoroethyl)trifluorophosphate [FAP]⁻, as well as three ILs containing the bis[(trifluoromethyl)sulfonyl]imide anion [NTf₂]⁻. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Fast wavefront sensing using a hardware parallel classifier chip

In most applications of laser technology and optics the beam quality, the ability to focus a laser beam and the achievement of a good optical resolution play an important role. The compensation of distortions using adaptive optics requires fast wavefront measurement. Classical wavefront analysis schemes use matrix operations, which show a nonlinear computation time dependence with matrix size, making it difficult to achieve high-speed control loops at a high resolution. A novel wavefront sensor system is presented using a massively parallel k-nearest neighbor classifier chip in an embedded hardware setup. Our miniaturized sensor is able to detect one optical distortion within about 80 μs allowing its use for high-speed adaptive optics applications.