Chemical, structural, and thermal properties of Zn(II)-Cr(III) layered double hydroxides intercalated with sulfated and sulfonated surfactants

Zn(II)-Cr(III)-LDHs (layered double hydroxides) containing sulfated or sulfonated surfactants as the interlamellar anion were synthesized by the coprecipitation method. The syntheses were conducted under various different experimental conditions, such as the Zn : Cr ratio, pH, and aging time. In each of the prepared materials, unlike previously reported data, the interlayer anion arrangement did not change, being consistent with a perpendicular monolayer. The thermal decomposition process of the prepared materials was studied by a set of analysis methods, such as TG/DTA, TG/MS, PXRD, and FT-IR. From the results obtained it was possible to conclude that, in an air atmosphere, the anions decomposed by a partial combustion, leading to the formation of sulfide. The results also showed that sulfonated surfactants containing LDHs are much more stable than those containing sulfated surfactants. A mechanism was proposed for the thermal decomposition of such LDHs based on the experimental results.     

VISIBLE CHEMILUMINESCENCE ASSOCIATED WITH THE REACTION BETWEEN METHEMOGLOBIN OR OXYHEMOGLOBIN WITH HYDROGEN PEROXIDE

Abstract Visible chemiluminescence is emitted in the irreversible deactivation of hemoglobin or methemoglobin with excess H₂O₂. The emission takes place in two phases. The most intense one lasts a few seconds and is followed by a second phase of lower intensity that remains for longer periods. This second phase presents chaotic or sustained oscillations. Free radicals are implicated in the luminescent process since the emission can be reduced by free radical scavengers such as 6-hydroxy-2,5,7,8,-tetramethylchroman-2-carboxylic acid (Trolox) or ascorbic acid. These additives lead to a delay in reaching the maximum intensity, which can be related to their consumption, implying substantial recycling of the hemoprotein. Chemiluminescence is also observed in the oxidation of hemin by H₂O₂, suggesting a role for the heme group in the processes leading to the excited state production. The lower intensity observed in the presence of hemin can be related to the contribution of the globin chains.     

Two thiourea‐containing gold(I) complexes

The crystal structures of two salts of bis­(thio­urea)­gold(I) complexes, namely bis­(thio­urea‐κS)­gold(I) chloride, [Au(CH₄N₂S)₂]Cl, (I), and bis­[bis­(thio­urea‐κS)­gold(I)] sulfate, [Au(CH₄N₂S)₂]₂SO₄, (II), have been determined. The chloride salt, (I), is isomorphous with the corresponding bromide salt, although there are differences in the bonding. The Au^I ion is located on an inversion centre and coordinated by two symmetry‐related thio­urea ligands through the lone pairs on their S atoms [Au—S 2.278 (2) Å and Au—S—C 105.3 (2)°]. The sulfate salt, (II), crystallizes with four independent [Au(CH₄N₂S)₂]⁺ cations per asymmetric unit, all with nearly linear S—Au—S bonding. The cations in (II) have similar conformations to that found for (I). The Au—S distances range from 2.276 (3) to 2.287 (3) Å and the Au—S—C angles from 173.5 (1) to 177.7 (1)°. These data are relevant in interpreting different electrochemical processes where gold–thio­urea species are formed.     

The structure of the FeNO group in two metastable states (MS1 and MS2) of the nitroprusside anion in Na2[Fe(CN)5NO].2H2O. Infrared spectra and quantum chemistry calculations for the normal and the 15NO and N18O isotopic substituted substance

Low temperature infrared spectra of light induced metastable states MS1 and MS2 of the nitroprusside anion in Na(2)[Fe(CN)(5)NO].2H(2)O, isotopically normal and substituted with (15)NO and N(18)O, are presented and discussed. As a consequence of the relatively high population of the MS2 state achieved by further irradiation with 1064 nm light of samples previously irradiated with 488.0 nm light, new bands were seen for the first time, and others, previously reported, were confirmed. The comparison of the spectral data obtained for the FeNO moiety of the isotopically normal as well as of the (15)NO and N(18)O substituted anion with the results of quantum chemical (DFT) calculations support the assignment of the bands which appear after successive irradiations to MS1, the linear Fe(eta(1)-ON) linkage isomer, and to MS2, the side-bound Fe(eta(2)-NO) isomer.     

Properties of a recombinant β-glucosidase from polycentric anaerobic fungus Orpinomyces PC-2 and its application for cellulose hydrolysis

A β-glucosidase (BglA, EC 3.2.1.21) gene from the polycentric anaerobic fungus Orpinomyces PC-2 was cloned and sequenced. The enzyme containing 657 amino acid residues was homologous to certain animal, plant, and bacterial β-glucosidases but lacked significant similarity to those from aerobic fungi. Neither cellulose- nor protein-binding domains were found in BglA. When expressed in Saccharomyces cerevisiae, the enzyme was secreted in two forms with masses of about 110 kDa and also found in two forms associated with the yeast cells. K _m and V _max values of the secreted BglA were 0.762 mM and 8.20 μmol/(min·mg), respectively, with p-nitrophenyl-β-d-glucopyranoside (pNPG) as the substrate and 0.310 mM and 6.45 μmol/(min·mg), respectively, for the hydrolysis of cellobiose. Glucose competitively inhibited the hydrolysis of pNPG with a K _i of 3.6 mM. β-Glucosidase significantly enhanced the conversion of cellulosic materials into glucose by Trichoderma reesei cellulase preparations, demonstrating its potential for use in biofuel and feedstock chemical production. Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may be suitable.     

Fitting complex potential energy surfaces to simple model potentials: application of the simplex-annealing method

A stochastic method of optimization, which combines simulated annealing with simplex, is implemented to fit the parameters of a simple model potential. The main characteristic of the method is that it explores the whole space of the parameters of the model potential, and therefore it is very efficient in locating the global minimum of the cost function, in addition to being independent of the initial guess of the parameters. The method is employed to fit the complex intermolecular potential energy surface of the dimer of water, using as a reference the spectroscopic quality anisotropic site-site potential of Feller et al. The simple model potential chosen for its reparameterization is the MCY model potential of Clementi et al. The quality of the fit is assessed by comparing the geometry of the minimum, the harmonic frequencies, and the second virial coefficients of the parameterized potential with the reference one. Finally, to prove more rigorously the robustness of this method, it is compared with standard nonstochastic methods of optimization.     

Some Comments on the Matter Wave-light Wave Hypothesis

From the de Broglie matter wave hypothesis and Planck’s energy quantization law, and assuming conservation of energy in the absorption of a photon and its consequent conversion to kinetic energy of motion by a material particle initially at rest, one can deduce a simple mathematical relationship between the wavelength λ (or frequency ν), of the photon absorbed by the particle at rest, and the resulting de Broglie matter wave length, λ_D, of the particle with kinetic energy of motion of mv²/2. The relationship so deduced, λ_D∝√λ, suggests that visible wavelengths of light, from about 4000 ?, in the violet, to beyond about 7000 ?, in the red, on absorption by an electron at rest, lead to material electron wavelengths, λ_D, of the order of the size of the electron transfer proteins seen in the photosynthetic reaction centers of photosynthesizing organisms, at about a size of 50–100 ?. In addition to understanding the mechanism of photosynthesis as a material wave mediated phenomenon, further areas of importance of the relations pointed out in this paper are in the design of experiments to gain a deeper understanding of the basic tenets of wave mechanics, and in the use of tunable lasers to probe various properties of material waves, and to precisely control their properties for applications including lithography.     

Hypervirial analysis of enclosed quantum mechanical systems. IV. Further comments

New formal results regarding the hypervirial analysis of enclosed systems are given. Novel applications are presented and several previous equations are reformulated in a more appropriate form.     

From nitrides to carbides: topotactic synthesis of the eta-carbides Fe3Mo3C and Co3Mo3C

The molybdenum bimetallic interstitial carbides Fe(3)Mo(3)C and Co(3)Mo(3)C have been synthesized by temperature-programmed reaction (TPR) between the molybdenum bimetallic interstitial nitrides Fe(3)Mo(3)N and Co(3)Mo(3)N and a flowing mixture of CH(4) and H(2) diluted in Ar. These compounds have been characterized by X-ray diffraction, laser Raman spectroscopy, elemental analysis, energy dispersive analysis of X rays, thermal analysis (in air) and scanning electron microscopy (field emission). Their structures have been refined from X-ray powder diffraction data. These carbides crystallize in the cubic system, space group Fd3m[a= 11.11376(6) and 11.0697(3)[Angstrom] for Fe and Co compounds, respectively].     

A re-statement of the Hohenberg–Kohn theorem and its extension to finite subspaces

Bearing in mind the insight into the Hohenberg–Kohn theorem for Coulomb systems provided recently by Kryachko (Int J Quantum Chem 103:818, 2005), we present a re-statement of this theorem through an elaboration on Lieb’s proof as well as an extension of this theorem to finite subspaces. Contribution to the Serafin Fraga Memorial Issue.