Al2O3-coated 3-N-propylpyridinium chloride silsesquioxane polymer film: preparation and electrochemical property study of adsorbed cobalt tetrasulfophthalocyanine

Porous Al2O3 presenting a specific surface area of SBET = 105 m2 g(-1) was coated with 3-N-propylpyridinium chloride silsesquioxane polymer. The ion exchange capacity of this polymer grafted onto an Al2O3 surface, resulting in a material designated as AlSiPy(+)Cl-, was 1.09 mmol g(-1). Furthermore, a cobalt(II) tetrasulfophthalocyanine anionic complex was immobilized on the chemically modified surface by an ion exchange reaction with a yield of 40 micromol g(-1) (the surface density of the electroactive species is 3.80 x 10(-11) mol cm(-2)). The electrochemical properties of the material obtained, AlSiPy/CoTsPc, were tested for the catalytic oxidation of oxalic acid at 0.77 V vs SCE in 1.0 mol l(-1) KCl solution. Furthermore, a chronoamperometric technique was used with the electrode to test its potential use as a sensor for oxalic acid. The electrode response to oxalic acid concentrations between 1.0 and 3.5 mmol l(-1) was linear with an estimated detection limit of 0.5 mmol l(-1). The charge transfer resistance of the material, measured using the electrochemical impedance spectroscopy technique, was 43 Omega cm2.     

Cerium hybrid silica coatings on stainless steel AISI 304 substrate

AISI 304 Stainless Steel is widely used in different industrial fields because of its mechanical and corrosion properties. However, its tendency to corrosion in presence of halide ions limits the applications. One strategy to improve the corrosion resistance is the use of coatings barriers containing corrosion inhibitors in their formulation. The lanthanides present attractive green and corrosion properties for the substitution of chromates, which are the most common substances used as corrosion protection. However, these compounds are highly toxic, and an intense effort is being undertaken to replace them. Cerium is a good alternative because of its relatively low cost and abundance. It fulfils the basics requirements for being considered an alternative inhibitor: the ions form insoluble hydroxides and they present low toxicity. Inorganic and hybrid sol-gel coatings have been developed to increase the corrosion resistance of metals and they provide an excellent vehicle for the incorporation of secondary phases including particles and metal ions as cerium ions. The aim of this work was to study the influence of the incorporation of cerium ions in hybrid silica sol-gel coatings deposited on AISI 304 stainless steel as substrate as a potential replacement of chromate treatments. This system should combine the barrier protection effect of silica coating with the corrosion inhibitor effect of the cerium ions inside the coatings. After 7 days of immersion in NaCl, coated substrates showed lower current densities than the bare steel, although the coatings produced from Ce (III) salts experience a slight weakening in time and those obtained from Ce (IV) chemicals evidence an enhance in the coating performance, probably due to the plugging of corrosion products in the defective areas of the film.     

Heterogeneous reactions of solid nickel(II) complexes,V

The kinetics of the thermal decomposition of solid complexes of the type Ni(NCS)₂L₂ (L=pyridine,β-picoline and quinoline), of pseudooctahedral configuration, were studied by using isothermal methods, on the basis of losses of weight, in the temperature range 90–191?. The most suitable reaction order for all the complexes under investigation was found to ben=2/3, i.e. the total decomposition rate is determined by the chemical process proper. The calculated values ofE _a(in kcal · mole^?1) decrease in the following order: Ni(NCS)₂py₂ (29.4)>Ni(NCS)₂(β-pic)₂ (27.6)>Ni(NCS)₂Q₂ (24.3). With increasing volume of the ligand L the reaction rate also increases, and this suggests that the reaction proceeds by dissociative activation. For all the investigated complexes it was found that δH>E _A; this may be explained by a several-step mechanism and the complex Ni(NCS)₂L is then considered an intermediate.     

Development and validation of an analytical methodology for the determination of p,p′-DDT, p,p′-DDE and p,p′-DDD in fish oil pills

An analytical methodology was proposed and validated to be applied to the determination of p,p′-DDT and its metabolites p,p′-DDE and p,p′-DDD in fish oil. The analytical procedure presented in this paper involves a single-step clean up process prior to the analysis. A solution of 1,2,3,4-tetrachloronaphtalene was used as internal standard.The analytical technique used was gas chromatography coupled to an electron capture detector. Details on the validation process are provided.The limits of detection ranged from 2.6 to 4.7 pg μL^− 1. The BCR 598 standard reference material (cod liver oil) was used to evaluate the performance of the methodology with satisfactory recoveries for all the compounds.The analytes were determined in three different fish oil pills sold in Spain as a supplementary vitamin support. The sum of p,p′-DDT and metabolites was from 13.2 to 51.3 ng g^− 1, the dominant compound being p,p′-DDE.     

Low-dimensional Compounds Containing Cyano Groups. XIII. Structural–spectral Correlation of Copper Dicyanoargentates

The new mixed-valence mixed-metal complex Cu(py)₆Cu₂Ag₂(CN)₆ (py = pyridine) possesses a three dimensional polymeric crystal structure. The Cu(I) atom is tetrahedrally coordinated by two nitrogen atoms of pyridine molecules, by one nitrogen atom of the dicyanoargentate anion and by one carbon atom of the cyano group. Both the dicyanoargentate anion and the cyano group bridge the Cu(I) atom with neighboring Cu(II) atoms. These are hexacoordinated in the form of an elongated tetragonal bipyramid. The equatorial plane is formed by two nitrogen atoms from two pyridine molecules and two nitrogen atoms from bridging cyano groups. Axial positions are occupied by nitrogen atoms of the bridging [Ag(CN₂]⁻ anions. Correlation between structures of the title compound and seven other dicyanoargentates with their i.r. spectra has been studied. The coordination mode of [Ag(CN₂]⁻ anions in compounds Cu_8-xAg_x(tn)₃(CN)₁₀ x = 0.25, Cu(3-Mepy)₂Ag₂(CN)₄, Cu(py)₂Ag₂(CN)₄ and Cu(py)₄Ag₂(CN)₄ (tn is 1,3-diaminopropane, 3-Mepy is 3-methylpyridine) is predicted based on this correlation.     

Solid-phase synthesis of the cyclic lipononadepsipeptide [N-Mst(Ser1), d-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin

An optimized solid-phase strategy for the preparation of the cyclic lipononadepsipeptide [N-Mst(L-Ser1), D-Ser4, L-Thr6, L-Asp8, L-Thr9]syringotoxin is reported. The strategy is based on the use of a mild orthogonal protection scheme and the incorporation of the nonproteinogenic amino acid (Z)-Dhb into the peptide chain as the dipeptide Fmoc-Thr(tBu)-(Z)-Dhb-OH. The didehydrodipeptide was synthesized by a water-soluble carbodiimide-induced beta-elimination of a protected dipeptide containing a residue of Thr with its free hydroxy side chain unprotected.     

A density functional theory study of the gas-phase elimination reactions of 4-arylideneimino-1,2,4-triazol-3(2H )-ones and their 3(2H )-thione analogues

Theoretical studies on the thermolysis in the gas phase of 4-arylideneimino-1,2,4-triazol-3(2H)-ones and 4-arylideneimino-1,2,4-triazol-3(2H)-thiones were carried out using density functional theory methods, at the B3LYP/6-31G(d) and B3LYP/6-311+G(2d,p) levels of theory. The proposed reaction mechanism occurs in one step, leading to the formation of 3-hydroxy-(2H)-1,2,4-triazole or 3-mercapto-(2H)-1,2,4-triazole and a 4-substituted benzonitrile, via a six-membered cyclic transition state. The progress of the reactions was followed by means of the Wiberg bond indices. The results indicate that the transition states have character intermediate between reactants and products, and the calculated synchronicities show that the reactions are slightly asynchronous, in the case of triazolones, and show a higher asynchronicity in the case of triazolthiones. The bond-breaking processes are slightly more advanced than the bond-forming ones, indicating a small bond deficiency in the transition states. Kinetic and activation parameters for the reactions studied have been calculated and compared with available experimental data.From the Proceedings of the 28th Congreso deQuímicos Teóricos de Expresión Latina (QUITEL 2002)     

From model compounds to extended pi-conjugated systems: synthesis and properties of dithieno[3,2-b:2',3'-d]phospholes

To explore their suitability for applications in molecular optoelectronics and as sensory materials, novel dithieno[3,2-b:2',3'-d]phospholes have been synthesized and their reactivity and properties investigated. An efficient two-step synthesis allowed for a modular assembly of differently functionalized compounds. The dithieno[3,2-b:2',3'-d]phosphole system exhibits extraordinary optoelectronic properties with respect to wavelength, intensity, and tunability. Owing to the nucleophilic nature of the central phosphorus atom, its significant electronic influence on the conjugated pi system can be altered selectively by chemically facile modifications such as oxidation or complexation with Lewis acids or transition metals. All the dithienophosphole species presented show very strong blue photoluminescence with excellent quantum yield efficiencies supporting their potential utility as blue-light emitting components in organic light emitting diodes (OLEDs). Furthermore, depending on the electronic nature of the phosphorus center, the materials exhibit distinctive optoelectronic properties suggesting that the dithieno[3,2-b:2',3'-d]phosphole system may be useful as sensory material. Theoretical calculations, including time-dependent DFT methods, revealed the excellent predictability of the structures and optoelectronic properties of the functionalized dithienophospholes allowing the design of future dithieno[3,2-b:2',3'-d]phosphole-based materials to be "stream-lined". By using tin-functionalized dithienophosphole monomers, a strategy, which involves Stille coupling, towards extended pi-conjugated materials with significantly redshifted optoelectronic properties is also presented.