Orthogonal polynomials on the unit circle and their derivatives

We characterize the sequences of orthogonal polynomials on the unit circle whose derivatives are also orthogonal polynomials on the unit circle. Some relations for the sequences of derivatives of orthogonal polynomials are provided. Finally, we pose some problems about orthogonality-preserving maps and differential equations for orthogonal polynomials on the unit circle.     

Incremental unknowns preconditioning for solving the Helmholtz equation

An efficient preconditioner is developed for solving the Helmholtz problem in both high and low frequency (wavenumber) regimes. The preconditioner is based on hierarchical unknowns on nested grids, known as incremental unknowns (IU). The motivation for the IU preconditioner is provided by an eigenvalue analysis of a simplified Helmholtz problem. The performance of our preconditioner is tested on the iterative solution of two‐dimensional electromagnetic scattering problems. When compared with other well‐known methods, our technique is shown to often provide a better numerical efficacy and, most importantly, to be more robust. Moreover, for the best performance, the number of IU levels used in the preconditioner should be designed for the coarsest grid to have roughly two points per linear wavelength. This result is consistent with the conventional sampling criteria for wave phenomena in contrast with existing IU applications for solving the Laplace/Poisson problem, where the coarsest grid comprises just one interior point. © 2007 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2007     

Inverse gas chromatography of lignocellulosic fibers coated with a thermosetting polymer: Use of peak maximum and conder and young methods

The Conder and Young (CY) and the peak maximum (PM) methods were used to estimate the retention time of n-alkane probes on chemithermomechanical pulp (CTMP) wood fibers treated with a low molecular weight grade phenol-formaldehyde resin (PFR). Thermodynamic functions (ΔH_a^o, ΔG_a^o, and ΔS_a^o) and the London dispersive component of the surface energy were derived from these retention times. Treated wood fibers show a high energy surface due to the presence of the thermoset resin on their surface. Values of ΔH_a^o obtained from the CY method were higher than those obtained with the PM method at relatively high temperatures and with relatively low molecular weight alkanes. The results from the two methods were identical at low temperature (293 K) and with the relatively high molecular weight alkane n-undecane.     

Une note sur les lemmes div–curl

Let $\text{Ω}$ be a strongly Lipschitz domain of $\text{R}{}^{\mathrm{n}}$ (n?2). We give endpoint versions of div–curl lemmata on $\text{Ω}$, for a given function f on $\text{Ω}$ whose gradient belongs to a Hardy space on $\text{Ω}$. To cite this article: P. Auscher et al., C. R. Acad. Sci. Paris, Ser. I 337 (2003).     

Structural characterization of nanopatterned surfaces

In this work, chemically and topographically nanopatterned surfaces were produced by a top-down processing approach for biosensing devices. The nanopatterning was the result of the combination of plasma polymerisation (pp) of biofunctional materials and colloidal lithography techniques. The morphological and chemical properties induced by the plasma deposition-etching treatment were characterised by optical method combining ellipsometry and Fourier Transform Infrared spectroscopy studies. This method supported by atomic force microscopy measurements, allowed the full optical characterization of each step of the top-down process. The optical characterization of the end-up nanopatterned samples demonstrated that the chosen process is able to produce well-defined nanostructured surfaces with controlled chemical and morphological properties.     

One-pot synthesis of an ionic half-sandwich complex of neodymium. Application to isoprene polymerisation catalysis

The reaction of one equivalent of Nd(BH₄)₃(THF)₃ with an half equivalent of dialkylmagnesium in the presence of a stoichiometric amount of pentamethylcyclopentadiene cleanly affords a new kind of half-sandwich of neodymium that is stable toward comproportionation. This strategy can be advantageously applied to generate in situ catalysts allowing the controlled polymerisation of isoprene.     

In situ layer-by-layer film formation kinetics under an applied voltage measured by optical waveguide lightmode spectroscopy

Layer-by-layer (LbL) thin film assembly occurs via the alternate adsorption of positively and negatively charged macromolecular species. We investigate here the control of LbL film growth through the electric potential of the underlying substrate. We employ optical waveguide lightmode spectroscopy (OWLS) to obtain in situ kinetic measurements of poly(allylamine hydrochloride)/poly(sodium 4-styrenesulfonate) (PAH/PSS) and poly(L-lysine)/dextran sulfate (PLL/DXS) multilayer film formation in the presence of an applied voltage difference (deltaV) between the adsorbing substrate, an indium tin oxide- (ITO-) coated waveguiding sensor chip, and a parallel platinum counterelectrode. We find initial layer adsorption to be significantly enhanced by an applied potential for both polyelectrolyte systems: the mass and thickness of (positively charged) PAH and PLL layers on ITO are about 60% and 500% larger, respectively, at deltaV = 2 V than at open circuit potential (OCP), in apparent violation of electrostatics. A kinetic analysis reveals the initial attachment rate constant to decrease with voltage, in agreement with electrostatics. To reconcile these results, we propose a more coiled and loosely bound adsorbed polymer conformation at higher applied potential. Following 10 adsorption steps, the mass and thickness of a PAH/PSS film grown under deltaV = 2 V are about 15% less than those of a comparable film grown under OCP, reflecting a lower degree of complexation between adsorbing polyanions and more highly coiled adsorbed polycations. Following 14 adsorption steps, the mass and thickness of a PLL/DXS film grown under deltaV = 2 V are about 70% greater than those of a comparable film grown under OCP, reflecting the increased charge overcompensation in the initial layer. We find the scaling of film mass () with the number of adsorption steps (n) to be linear in the PAH/PSS system and exponential (i.e., approximately eyn) in the PLL/DXS system, irrespective of applied voltage. We observe to decrease with applied voltage and to exhibit a crossover to a smaller value around n = 5. Extrapolation reveals PLL/DXS multilayer films to be suppressed by increased voltage in the limit of large n: the mass of films grown at OCP and deltaV = 1 V would surpass that of a film grown under deltaV = 2 V at about the 23rd and 18th adsorption steps, respectively. The formation kinetics of PLL/DXS, but not PAH/PSS, change qualitatively under voltage: PLL adsorption is slow to reach a plateau, possibly due to the formation of secondary structure, and a decrease in film mass occurs toward the end of each DXS adsorption step, suggesting spontaneous removal of some PLL/DXS complexes from the film.     

Infrared Evidence for Hoffman Reaction During Calcination of Surfactant-Templated Silica Films and Analysis of the Resulting Surface Sites

Fourier Transform Infrared transmission spectroscopy is used to characterize surfactant-templated silica films on glass. The calcination process is followed in situ and evidence for the removal of the surfactant along the Hoffman reaction is given. Once calcined, the surface of the pores of the mesoporous films is proven by deuteration experiment to be hydroxylated. Bands are attributed to isolated and hydrogen-bonded silanols. Silylation reaction with hexamethyldisilazane only occurs with isolated silanol groups.     

EFFECT OF MOLYBDENUM PROMOTER ON THE Cu-Co BASED CATALYSTS

The synthesis of mixed alcohols (C1-C5) from syngas has been studied at 6. 0 MPa over modified Co/CuLaZr catalysts. The molybdenum addition enhanced greatly the activity and the selectivity to alcohols. The improvement of hydrogenation capacity of the system via a reversible spillover effect of hydrogen could explain this effect, together with a great capacity of CO insertion, illustrated by the effect of C2H4 addition as a probe to syngas. Under our experimental conditions, a mixed alcohol production of 147.1g/kg. cat/h containing a proportion of 33. 1% of higher alcohols (C2 OH) was obtained with a selectivity to ROH of 52. 8%.