Stability and fragmentation of organic silicon functionalizations studied by laser desorption mass spectrometry

A method is introduced to investigate organic functionalizations on silicon by laser-induced thermal desorption (LITD), where well-ordered Si(1 1 1)-(1 × 1):H(D) surfaces are used to determine the desorption temperature as a function of laser fluence. To demonstrate the potential of this technique silicon surfaces with ultrathin oxide layers were functionalized with organic end groups. The species desorbed with focused XeCl laser pulses were monitored at an oblique angle and their time-of-flight (TOF) distributions were measured with a quadrupole mass analyzer after electron impact ionization. By assuming a negligible contribution of the oxide and organic layers to the heating effect, the TOF temperatures measured for Si(1 1 1)-(1 × 1):H(D) could be used to determine the mass of the desorbed species. Detailed results are presented for dimethylsilyl (DMS), bromomethyldimethylsilyl (BMDMS), and chloromethyldimethylsilyl (CMDMS) terminated surfaces which were prepared by silanization with suitable chloro and disilazane compounds. While for the DMS termination dimethylsilanol (76 u) is desorbed as a single species, clearly identifying the terminating group, in the case of BMDMS and CMDMS further fragmentation of the end group occurs at the surface.     

A high-throughput search for direct methanol fuel cell anode electrocatalysts of type PtxBiyPbz

We used a high-throughput method to screen for direct methanol fuel cell anode electrocatalysts in the Pt-Bi-Pb system. Previous studies showed that PtBi and PtPb (both NiAs structure type) were active electrocatalysts for the oxidation of formic acid, but only PtPb was active in oxidizing methanol. We synthesized thin films with continuous composition spreads of the three elements by magnetron sputtering at deposition temperatures from ambient to 510 °C. A fluorescence method was then used to identify compositions that were active toward methanol oxidation. Only films deposited between temperatures of 160 and 400 °C showed electrocatalytic activity. The areas that were active for methanol oxidation showed predominantly the NiAs structure type according to XRD, with optimal activity for compositions near PtBi_0.01Pb_0.53.     

trans‐Decahydronaphthalene (decalin) from powder diffraction data

The title compound, C₁₀H₁₈, a decalin stereoisomer, crystallizes with Z′ = 0.5 in the space group P2₁/n. The trans‐decalin molecule is located on an inversion centre with both rings in a chair conformation, making for a quasi‐flat overall shape. Despite the absence of hydrogen bonds, it crystallizes easily. In this work the unknown crystal structure of trans‐decalin has been solved and refined using X‐ray powder diffraction data.     

Synthesis and characterization of BaZrO3-doped YBa2Cu3O7−δ microtapes with improved critical current densities

We have recently demonstrated that through a sol–gel route, superconductor crystallization in the presence of simple biopolymers results in a drastic alteration of morphology, producing technologically useful nanowires and porous architectures. Morphological control is of the utmost importance to bulk high-temperature superconductors, as grain boundaries act as weak links in limiting the achievable critical current density (J_c). Here we show that, as expected, the incorporation of nanoparticulate barium zirconate (BaZrO₃) species into a biopolymer-mediated synthetic protocol for YBa₂Cu₃O_7?δ (Y123) leads to a significantly improved in-field J_c compared to that observed in a sample without BaZrO₃ additions. To ameliorate degradation of the BaZrO₃ species in this protocol, we demonstrate that by drawing the precursor sol into fibers, a microtape architecture is able to be formed, leading to lengthy, anisotropic structures having enhanced J_c through the retention of the BaZrO₃ species.     

Development of an enzymatic microreactor based on microencapsulated laccase with off-line capillary electrophoresis for measurement of oxidation reactions

Microencapsulation is used here as a new technique to immobilize enzymes in a microreactor coupled off-line to capillary electrophoresis (CE), allowing the determination of enzymatic reaction products. The redox enzyme laccase was encapsulated using the method of interfacial cross-linking of poly(ethyleneimine) (PEI). The 50 μm diameter capsules were slurry packed from a suspension into a capillary-sized reactor made easily and quickly from a short length of 530 μm diameter fused-silica tubing. The volume of the bed of laccase microcapsules in the microreactor was in the order of 1.1 μL through which 50 μL of the substrate o-phenylenediamine (OPD) was flowed. The oxidation product 2,3-diaminophenazine (DAP) and the remaining OPD were quantified by CE in a pH 2.5 phosphate buffer. Peak migration time reproducibility was in the order of 0.4% RSD and peak area reproducibility was less than 1.7% RSD within the same day. Using the OPD peak area calibration curve, a conversion efficiency of 48% was achieved for a 2-min oxidation reaction in the microreactor.     

Experimental and computational studies of the macrocyclic effect of an auxiliary ligand on electron and proton transfers within ternary copper(II)-Histidine complexes

The dissociation of [Cu^II(L)His]^•2+ complexes [L=diethylenetriamine (dien) or 1,4,7-triazacyclononane (9-aneN₃)] bears a strong resemblance to the previously reported behavior of [Cu^II(L)GGH]^•2+ complexes. We have used low-energy collision-induced dissociation experiments and density functional theory (DFT) calculations at the B3LYP/6-31+G(d) level to study the macrocyclic effect of the auxiliary ligands on the formation of His^•+ from prototypical [Cu^II(L)His]^•2+ systems. DFT revealed that the relative energy barriers of the same electron-transfer (ET) dissociation pathways of [Cu^II(9-aneN₃)His]^•2+ and [Cu^II(dien)His]^•2+ are very similar, with the ET reactions of [Cu^II(9-aneN₃)His]^•2+ leading to the generation of two distinct His^•+ species; in contrast, the proton transfer (PT) dissociation pathways of [Cu^II(9-aneN₃)His]^•2+ and [Cu^II(dien)His]^•2+ differ considerably. The PT reactions of [Cu^II(9-aneN₃)His]^•2+ are associated with substantially higher barriers (>13 kcal/mol) than those of [Cu^II(dien)His]^•2+. Thus, the sterically encumbered auxiliary 9-aneN₃ ligand facilitates ET reactions while moderating PT reactions, allowing the formation of hitherto nonobservable histidine radical cations.     

Gravity and gauge: A new perspective

Realization of the Poincaré groupP ₁₀ as a subgroup ofGL(5,R) that maps a 4-dimensional affine set into itself has been shown to lead to a direct Yang-Mills gauging process. This paper discusses the differences between direct gauge theory forP ₁₀ and previously published works. These differences are fundamental, both physically and mathematically, and lead to marked departures from previous concepts and interpretations. The translation subgroup is correctly gauged; the metric structure and metric compatibility are derived from the gauging process rather than assumed; spin structures are automatically incorporated in a consistent manner; the local holonomy group is shown to be the component of the Lorentz group connected to the identity; the geometric analog of Yang-Mills minimal coupling precludes dependence of the free gauge field Lagranian on torsion; and the theory reduces exactly to general relativity when the momentumenergy complex is symmetric and all matter fields are spin-free. Gravitational effects on neutral test particles are shown to arise from the compensating 1-forms for local action of Lorentz boosts. The compensating 1-forms for local action of the translation subgroup may be interpreted as space-time dislocations, while the compensating 1-forms for the rotation subgroup can be viewed as space-time disclinations. Unfortunately, there are no clear physical meanings that can be ascribed to space-time dislocations or disclinations.     

Electron transfer dissociation with supplemental activation to differentiate aspartic and isoaspartic residues in doubly charged peptide cations

Electron-transfer dissociation (ETD) with supplemental activation of the doubly charged deamidated tryptic digested peptide ions allows differentiation of isoaspartic acid and aspartic acid residues using the c + 57 or z ^• − 57 peaks. The diagnostic peak clearly localizes and characterizes the isoaspartic acid residue. Supplemental activation in ETD of the doubly charged peptide ions involves resonant excitation of the charge reduced precursor radical cations and leads to further dissociation, including extra backbone cleavages and secondary fragmentation. Supplemental activation is essential to obtain a high quality ETD spectrum (especially for doubly charged peptide ions) with sequence information. Unfortunately, the low-resolution of the ion trap mass spectrometer makes detection of the diagnostic peak, [M-60], for the aspartic acid residue difficult due to interference with side-chain loss from arginine and glutamic acid residues.     

Field transfer decay and interferometry in coupled waveguides with stochastic sources

Coupled waveguides, such as those used as optical filters, switches, or couplers, are investigated in the context of coherence theory. A stochastic source is introduced to the standard coupled-mode model. Decay in the power transferred between the waveguides as a function of distance is predicted. Application of this result in the form of an interferometric spectrometer is explored.