Negative dipole potentials of uncharged langmuir monolayers due to fluorination of the hydrophilic heads

The dipole potential, affecting the structure, functions, and interactions of biomembranes, lipid bilayers, and Langmuir monolayers, is positive toward the hydrocarbon moieties. We show that uncharged Langmuir monolayers of docosyl trifluoroethyl ether (DFEE) exhibit large negative dipole potentials, while the nonfluorinated docosyl ethyl ether (DEE) forms films with positive dipole potentials. Comparison of the Delta V values for these ethers with those of the previously studied(37-39) monolayers of trifluoroethyl ester (TFEB) and ethyl ester of behenic acid (EB) shows that the reversal of the sign of Delta V causes the same change Delta(Delta V) = -706 +/- 16 mV due to fluorination of heads. The Delta V values of both TFEB and EB films differ by -122 +/- 16 mV from those of DFEE and DEE monolayers, respectively, with the same density. Such quantitative coincidence points to a common mechanism of reversal of the sign of the dipole potential for the ether and ester films despite the different structure of their heads. The mechanical properties and phase behaviors of these monolayers show that both fluorinated heads are less hydrated, suggesting that the change of the sign of Delta V could, at least partially, be related to different hydration water structure. The same negative contribution of the carbonyl bond in both TFEB and EB films contrasts with the generally accepted positive contribution of the C(delta+)=O(delta-) bond in condensed Langmuir monolayers of fatty acids, their alcohol esters, glycerides, and phospholipids but concurs with the theoretical analysis of Delta V of stearic acid monolayers. Both results question the literature values of the molecular dipole moments of these substances calculated via summation of bonds and atomic group contributions. Mixed monolayers of DFEE and DEE show smooth monotonic variation of Delta V from +450 to -235 mV, indicating a way for adjustment of the sign and magnitude of the dipole potential at the membrane-water boundary and regulation of such membrane behaviors as binding and translocation rate of hydrophobic ions and ion-carriers, adsorption and penetration of amphiphilic peptides, polarization of hydration water, and short-range repulsion. The interaction of the hydrophobic ions tetraphenylboron TPhB- and tetraphenylphosphonium TPhP+ with DFEE and DEE monolayers qualitatively follows the theory of binding of such ions to lipid bilayers, but the shifts Delta(Delta V) from the values obtained on water are much smaller than those for DPPC monolayers. This difference seems to be due to the solid (polycrystalline) character of the DFEE and DEE films that hampers the penetration of TPhB- and TPhP+ in the monolayers and reduces the attractive interaction with the hydrophobic moiety. This conclusion orients the future synthesis of amphiphiles with fluorinated heads to those which could form liquid-expanded Langmuir monolayers.     

Effects of internal hydrogen bonds between amide groups: protonation of alicyclic diamides

The proton affinity (PA) of cyclopentane carboxamide 1, cyclohexane carboxamide 2 and their secondary and tertiary amide derivatives S1, S2, T1 and T2, was determined by the thermokinetic method and the kinetic method [PA(1) = 888 +/- 5 kJ mol(1); PA(2) = 892 +/- 5 kJ mol(1); PA(S1) = 920 +/- 6 kJ mol(1); PA(S2) = 920 +/- 6 kJ mol(1); PA(T1) = 938 +/- 6 kJ mol(1); PA(T2) = 938 +/- 6 kJ mol(1)]. Special entropy effects are not observed. Additionally, the effects of protonation have been studied using an advanced kinetic method for all isomers 37 of cyclopentane dicarboxamides and cyclohexane dicarboxamides (with the exception of cis-cyclopentane-1,2-dicarboxamide) and their bis-tertiary derivatives T3T7 by estimating the PA and the apparent entropy of protonation Delta(DeltaS(app)). Finally, the study was extended to bicyclo[2.2.1]hepta-2,5-diene-2,3-dicarboxamide 8 and its bis-tertiary derivative T8, to all stereoisomers of bicyclo[2.2.1]heptane-2,3-dicarboxamide 9, their secondary and tertiary amide derivatives S9 and T9, and to endoendobicyclo[2.2.1]heptane-2,5-dicarboxamide 10 and the corresponding secondary and tertiary derivatives S10 and T10. Compared with 1 and 2, all alicyclic diamides exhibit a significant increase of the PA (DeltaPA) and special entropy effects on protonation. For alicyclic diamides, which can not accommodate a conformation appropriate for building a proton bridge, the values of DeltaPA and Delta(DeltaS(app)) are small to moderate. This is explained by ion / dipole interactions between the protonated and neutral amide group which stabilize the protonated species but hinder the free rotation of the amide groups. If any of the conformations of the alicyclic diamide allows formation of a proton bridge, DeltaPA and Delta(DeltaS(app)) increase considerably. A spectacular case is cis-cyclohexane-1,4-dicarboxamide 7c which is the most basic monocyclic diamide, although generation of the proton bridge requires the unfavorable boat conformation with both amide substituents at a flagpole position. A pre-orientation of the two amide groups in such a 1,4-position in 10 results in a particularly large PA of < 1000 kJ mol(1). The observation of comparable values for Delta(DeltaS(app)) for linear and monocyclic diamides indicates that a major part of the entropy effects originates from freezing the free rotation of the amide groups by formation of the proton bridge. This is corroborated by observing corresponding effects during the protonation of dicarboxamides containing the rigid bicyclo[2.2.1]heptane carbon skeleton, where the only internal movements of the molecules corresponds to rotation of the amide substituents.     

On the determination of the worst sampling error in a communication system for pulse amplitude modulated signals. Part II: The finite dimensional model

This paper is dedicated to the problem of optimizing the transmission properties of a Pulse Amplitude Modulation (PAM) system. The system is disturbed by a random timing jitter in the sampling device which periodically evaluates the continuous output signal at discrete times. Mathematically the timing jitter is a random variable with unknown probability distribution. So, our optimization problem turns out to be actually a minimax problem, for which mathematical game theory with its powerful concepts becomes the suitable frame for our analysis.In the first part [4] we have established a general existence theorem for the minimax problem, and we have worked out some properties of solutions in the case that the feasible impulse responses form a space of infinite dimension.This part summarizes results which we obtain, if we allow only for impulse responses lying in a certainn-dimensional subspace of the original space (see [2, 3]). By general results from semi-infinite optimization (see [1]) we know that, writing the minimax problem as a semi-infinite optimization problem, we can reduce the number of restrictions from infinity to a numbersn+1. On the basis of our special model we present a theory of uniformly singular quadratic forms, which has been developed (see [3]) in order to get additional statements abouts.In this way we supplement the work of Krabs [6], who was the first to present such a finite dimensional model, arguing that it is impossible for an engineer to construct a system in a way that an arbitrary impulse response is realized, unless this impulse response has a simple structure (for instance a low pass filter).The first two paragraphs have been taken almost literally from part I in order to render the lecture more comfortable. The interesting parts, however, are the following ones, where the results specific for the finite dimensional case are worked out.     

Geometry and Electronic Structure of CuCl(6)(4-) Polyhedra Doped into (3-Chloroanilinium)(8)[CdCl(6)]Cl(4)-An EPR and Structural Investigation

The EPR single-crystal and powder spectra of mixed crystals of (3-chloroanilinium)(8)(Cd(1-x)Cu(x)Cl(6))Cl(4) are measured as a function of temperature and x and analyzed with respect to the geometry and bonding properties of the CuCl(6) polyhedra. These undergo strong distortions due to vibronic Jahn-Teller coupling, with the resulting tetragonal elongation being superimposed by a considerable orthorhombic symmetry component induced by a host site strain acting as a compression along the crystallographic a axis. This strain becomes apparent in the cadmium compound (x = 0), whose crystal structure is also reported [a = 8.701(2) ?, b = 13.975(2) ?, c = 14.173(2) ?, alpha = 81.62(1) degrees, beta = 72.92(1) degrees, gamma = 77.57(1) degrees, triclinic P&onemacr;, Z = 1]. A calculation of the ground state potential surface and its vibronic structure nicely reproduces the g values, Cu-Cl spacings, and ligand field data. At high copper concentrations (including x = 1), the CuCl(6) polyhedra are coupled elastically, with the long axes of neighboring polyhedra having perpendicular orientations. The elastic correlation presumably is not of the long-range antiferrodistortive type, however. Above about 55 K, the angular Jahn-Teller distortion component becomes dynamically averaged within the time scale of the EPR experiment, leading to local tetragonally compressed CuCl(6) octahedra.     

Synthese und Kristallstruktur von [ReNCl(NPPh2C6H4)]2 · [Ph3PNH2]Cl · CH3CN,einem rheniumorganischen Nitrido-Phosphaniminato-Komplex

Synthesis and Crystal Structure of [ReNCl(NPPh₂C₆H₄)]₂ · [Ph₃PNH₂]Cl · CH₃CN, a Rhenium Organic Nitrido Phosphoraneiminato Complex The title compound is synthesized by the reaction of ReNCl₄ with Me₃SiNPPh₃ in boiling acetonitrile, forming colourless crystals, which are characterized by an X-ray structure determination. Space group P1 , Z = 2, 4 037 observed unique reflections, R = 0.043. Lattice dimensions at 19°C: a = 1 005.5; b = 1 695.2; c = 1 744.7 pm, α = 105.86°; β = 101.49°; γ = 104.45°. The structure consists of dimeric molecules [ReNCl(NPPh₂C₆H₄)]₂, triphenylphosphorane ammoniumchloride and included acetonitrile molecules. In the nitrido phosphoraneiminato complex the rhenium atoms are μ₂-bridged via the N-Atoms of the phosphoraneiminato ligands. Because of this bridging and a Re? Re bond, one terminal nitrido ligand, one terminal chloro ligand, and a Re? C bond of an -C-atom of one phenylene group of Re-atoms attain co-ordination number six.     

Bis(cyclopentadienyl)methan-verbrückte Zweikernkomplexe,V. Heteronukleare Co/Rh-, Co/Ir-, Rh/Ir- und Ti/Ir-Komplexe mit dem Bis(cyclopentadienyl)methan-Dianion als Brückenliganden

Bis(cyclopentadienyl)methane-bridged Dinuclear Complexes, V^[1]. – Heteronuclear Co/Rh-, Co/Ir-, Rh/Ir-, and Ti/Ir Complexes with the Bis(cyclopentadienyl)methane Dianion as Bridging Ligand^* The lithium and sodium salts of the [C₅H₅CH₂C₅H₄]^- anion, 1 and 2 , react with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [Ir(CO)₃Cl]n to give predominantly the mononuclear complexes [(C₅H₅-CH₂C₅H₄)M(CO)₂] ( 3, 5, 7 ) together with small amounts of the dinuclear compounds [CH₂(C₅H₄)₂][M(CO)₂]₂ ( 4, 6, 8 ). The ¹H- and ¹³C-NMR spectra of 3, 5 , and 7 prove that the CH₂C₅H₅ substituent is linked to the π-bonded ring in two isomeric forms. Metalation of 5 and 7 with nBuLi affords the lithiated derivatives 9 and 10 from which on reaction with [Co(CO)₄I], [Rh(CO)₂Cl]₂, and [C₅H₅TiCl₃] the heteronuclear complexes [CH₂(C₅H₄)₂][M(CO)₂][M′(CO)₂] ( 11–13 ) and [CH₂(C₅H₄)₂]-[Ir(CO)₂][C₅H₅TiCl₂] ( 17 ) are obtained. Photolysis of 11 and 12 leads almost quantitatively to the formation of the CO-bridged compounds [CH₂(C₅H₄)₂][M(CO)(μ-CO)M′(CO)] ( 14, 15 ). According to an X-ray crystal structure analysis the Co/Rh complex 14 is isostructural to [CH₂(C₅H₄)₂][Rh₂(CO)₂(μ-CO)] ( 16 ).     

Electrostatic representations of molecular groups

The treatment of electrostatic interactions between molecular groups is based on quantum mechanical electron density distributions. A general method is suggested using tesseral harmonic multipole expansions and representing each set of point multipoles by a cluster of discrete charges small with respect to atomic dimensions. The procedure is carried out for the amino group with an electron density derived from the wave function of ammonia. We evaluate the optical rotation of two aminopyrrolidones as a test case. Expansions are compared for several approximate wave functions for ammonia.     

Rhenium‐Dicarbonyl‐Nitrosyl‐Komplexe mit Imidazol

Rhenium Dicarbonyl‐Nitrosyl Complexes with Imidazole Different rhenium‐dicarbonyl‐nitrosyl complexes with imidazole (Im) as monodentate ligand have been synthesized and characterized, starting from [NEt₄][ReCl₃(CO)₂(NO)] and [ReCl(μ?Cl)(CO)₂(NO)]₂. Whereas the complexes [ReCl₂(Im)(CO)₂(NO)] and [ReCl(Im)₂(CO)₂(NO)]⁺ were achieved in high yields, the complex [Re(Im)₃(CO)₂(NO)]²⁺ with three imidazole ligands could only be isolated after complete removal of all halide ions (with AgBF₄) in low yield. The synthesis of a corresponding ^99mTc‐dicarbonyl‐nitrosyl complex with imidazole opens a new perspective for such compounds as potential radiopharmaceuticals and alternatives to the already established ^99mTc‐tricarbonyl complexes.     

Mechanism of homogeneously and heterogeneously catalysed Meerwein-Ponndorf-Verley-Oppenauer reactions for the racemisation of secondary alcohols

The mechanism of hydrogen transfer from alcohols to ketones, catalysed by lanthanide(III) isopropoxides or zeolite Beta has been studied. For the lanthanide catalysed reactions, (S)-1-phenyl-(1-(2)H(1))ethanol and acetophenone were used as case studies to determine the reaction pathway for the hydrogen transfer. Upon complete racemisation all deuterium was present at the 1-position, indicating that the reaction exclusively takes place via a carbon-to-carbon hydrogen transfer. Zeolite Beta with different Si/Al ratios was applied in the racemisation of (S)-1-phenylethanol. In this case the racemisation does not proceed via an oxidation/reduction pathway but via elimination of the hydroxy group and its re-addition. This mechanism, however, is not characteristic for all racemisation reactions with zeolite Beta. When 4-tert-butyl cyclohexanone is reduced with this catalyst, a classical MPV reaction takes place exclusively. This demonstrates that zeolite Beta has a substrate dependent reaction pathway.