Sm2Fe17合金的氢化-歧化过程演化

通过X射线衍射(XRD)、扫描电镜(SEM)和能谱分析(EDX)等手段重点研究了Sm2Fe17合金在氢化-歧化过程中的相组成、相的变化以及微观结构的演化规律。研究表明：在0．1MPa的H2气氛下，Sm2Fe17合金首先吸氢；400℃时合金出现部分脱氢现象；在T≥500℃逐渐开始歧化为SmHx和α—Fe，同时生成了大量的微晶或非晶组织；随着温度的升高，合金中的微晶非晶逐渐晶化，750℃时晶化完全，晶粒长大至20～100nm。通过对Sm2Fe17合金的氢化一歧化过程研究，建立了该过程的微观结构变化规律的物理模型。     

Facile synthesis of exfoliated and highly conductive poly(arylene disulfide)/graphite nanocomposites

Exfoliated graphite has been synthesized by first synthesizing H₂SO₄ intercalated compound in a H₂O₂‐H₂SO₄ mixture, followed by exfoliation under microwave irradiation. Poly(arylene disulfide)/graphite nanocomposites were then fabricated by absorbing cyclic(arylene disulfide) oligomers into the pores of exfoliated graphite. Subsequently, the nanocomposite precursor was subjected to heat treatment to carry out the in situ ring‐opening polymerization of the oligomers via free radical mechanism. The as‐prepared nanocomposite exhibited a exfoliated nanostructure as evidenced by transmission electron microscopy (TEM) observation. The nanocomposite with a very small amount of graphite, 5 wt%, possesses a highly electrical conductivity of 4 S/cm, therefore, many applications can be found as conductive materials. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis and characterization of perfluorohexylated poly(3,4-ethylenedioxythiophene)

The perfluorohexylated 3,4-ethylenedioxythiophene 5 was prepared via Mitsunobu reaction of perfluorohexylatyed diol 2 with diethyl 3,4-dihydroxythiophenedicarboxylate followed by decarboxylation. The polymerization of 5 was conducted with both oxidative chemical and electrochemical polymerizations. The polymers were characterized by cyclic voltammogram, UV, IR, TGA and DSC.     

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素A，α－E，D_3，K_3

反相高效液相色谱法的多波长同时测定预混合饲料中的脂溶性维生素Ａ，α－Ｅ，Ｄ＿３，Ｋ＿３李桂凤，李缙扬，郝征红，聂燕，孟兆宏，李学春（山东省农业科学院中心实验室济南２５０１００）１前言对脂溶性维生素的分析，被许多国内外分析专家认为是高难度的分析项目。本...     

Structure, Stability and Vibrational Spectra of LaC_5~n(n=-1,0,+1) Clusters

用密度泛含方法研究了ＬａＣ５ｎ（ｎ＝－１，０，＋１）分子簇的结构和稳定性及振动光谱，对这个六原子体系提出了三种可能构型，点群结构为Ｃ２ｖ对称性．第一个构型为Ｌａ接在弯曲的Ｃ５链上，第二个是Ｌａ通过二个键与Ｃ５环相连第三个是Ｌａ通过一个键与Ｃ５环相连；结果表明，第一个构型即当Ｌａ接在弯曲的Ｃ５链上时能量最低．振动光谱分析指出，当ｎ＝－１时，第二个构型为局域极小值；当ｎ＝＋１时，第一个和第二个构型为局域极小值；对ｎ＝０，局域极小值没有找到．     

用共振电离飞行时间质谱仪分析土壤中超痕量气态金

采用激光共振电离飞行时间质谱技术（简称ＲＩＳ－ＴＯＦ技术）对土壤中超痕量气态金的含量进行了分析研究。ＲＩＳ－ＴＯＦ谱仪具有极高的灵敏度和很强的选择性，避免了对样品的预富集过程。本文给出了该谱仪对金元素的检测限和６５个土壤中气态金样品的分析结果，以及用中子活化法随机抽样检查的结果。     

The complexation of apo-metallothionein with cadmium ion and its conformation study

The circular dichroism was used to study the complexation of two isoforms of rabbit liver apo-metallothioneins (apo-MT1 and apo-MT2) with Cd²⁺ ion and the influence of Cd²⁺ ion on the conformation of reconstituted MTs. The stability of sulfhydryls of apo-MT has been investigated at the room temperature in the presence of air. The reconstitutions of apo-MT1 with Cd²⁺ ion were carried out atpH 4.71 (stable state) andpH 7.9 (with 90% sulfhydryls oxidated) respectively. it was found that the characteristic CD band at 257 nm(+), 238 nm(?), 226 nm(+) of reconstituted MT with Cd²⁺ ion was the same as native MT atpH 4.71, however only one peak at 243 nm(+) appeared on the CD spectra atpH 7.9 which arose from mononuclear complexes with four separated thiolate ligands per Cd²⁺ ion. The CD spectra of apo-MTs+7 eq Cd²⁺ system were measured at variouspH values. It was found that the peak at 256 nm of apo-MT1 binding Cd²⁺ ion split into two small peaks atpH between 2.42 and 3.02, and became one peak atpH 3.32, while the shapes of Cd peaks of apo-MT2 binding Cd²⁺ ion did not change withpH, indicating that the binding sites and pathway of apo-MT1 binding Cd²⁺ ion were different from those of apo-MT2. A possible mechanism was suggested.     

真空下X2 (X=Cl、Br)与AgOCN气-固反应机理

在真空条件下完成了X2 (X=Cl、Br)与AgOCN间的气-固异相反应，利用紫外光电子能谱（PES）仪，探测与确定反应产物是XNCO (X=Cl、Br)，并推断其可能为一过渡态反应，生成中间络合物，新键产生与旧键断裂同时进行.     

Preparation and electrochemistry of azobenzene self-assembled monolayers on gold--long range tunneling and end-group hydrogen bonding effect

A series of thiol-functionalied azobenzene derivatives (RAzoCnSH: R=H for n=3-6, abbreviated as AzoCnSH; R=CH(3)CONH for n=4, abbreviated as aaAzoC4SH) on gold electrodes were prepared and their self-assembly and electrochemical properties were studied by cyclic voltammetry. They all formed uniform and reproducible self-assembled monolayers (SAMs) on gold and showed well-behaved voltammetric responses in aqueous solution. Both the length of the alkyl chain spacer and the H-bonding of the end acetamino group had effects on the stability and the electrochemical kinetics of the SAMs, and the effect of the H-bonding was dominant. The surface coverage of the SAMs (AzoCnSH) is gradually increased with an increase of the alkyl chain spacer length, whereas the presence of the terminal acetamino group leads to a greater increase of the surface coverage. At a low scan rate, voltammetric responses corresponding to an irreversible two-electron, two-proton reduction/oxidation of the trans-azobenzene redox center were obtained in the range of +300 mV and -800 mV, which exhibited very large peak-to-peak splitting. At a high scan rate of 500 mV/s, two steps of reversible one-electron, one-proton reduction/oxidation corresponding to the cis-isomer in azobenzene-thiol SAMs (n is odd) was clearly observed between +300 and -200 mV. The apparent electron-transfer rate is decreased with increasing distance between the azobenzene redox center and the gold electrode. The existence of the end acetamino group which restricted the conformational change during the redox process also led to a decrease of the standard rate constant, and this restriction effect is more predominant than the distance effect.     

Morphological effect on spectral property of poly(9,9-dihexylfluorene-alt-2,5-dihexyloxybenzene) films

In this study the optical property and film morphology of a conjugated polymer, poly(9,9-dihexylfluorene-alt-2,5-dihexyloxybenzene) (PF6OC6), are investigated. It is found that the intensity of the 0-1 emission relative to the 0-0 emission in the PL spectra and the full width at the half-maximum (fwhm) of PL spectra of the PF6OC6 films decrease firstly and then increase with increasing the annealing temperature. The polymer films also exhibit different morphological features after annealing at different temperatures. The optical and morphological results suggest that the vibronic structure of PF6OC6 is closely related to the film morphology, and its formation is enhanced in the amorphous (or less ordered) films and inhibited in the ordered films.