Preservation strategies for inorganic arsenic species in high iron,low-<Emphasis Type="Italic">Eh</Emphasis> groundwater from West Bengal,India

Despite the importance of accurately determining inorganic arsenic speciation in natural waters to predicting bioavailability and environmental and health impacts, there remains considerable debate about the most appropriate species preservation strategies to adopt. In particular, the high-iron, low-Eh (redox potential) shallow groundwaters in West Bengal, Bangladesh and SE Asia, the use of which for drinking and irrigation purposes has led to massive international concerns for human health, are particularly prone to changes in arsenic speciation after sampling. The effectiveness of HCl and EDTA preservation strategies has been compared and used on variably arsenic-rich West Bengali groundwater samples, analysed by ion chromatography–inductively coupled plasma–mass spectrometry (IC–ICP–MS). Immediate filtration and acidification with HCl followed by refrigerated storage was found to be the most effective strategy for minimizing the oxidation of inorganic As(III) during storage. The use of a PRP-X100 (Hamilton) column with a 20 mmol L^–1 NH₄H₂PO₄ as mobile phase enabled the separation of Cl^– from As(III), monomethylarsonic acid, dimethylarsinic acid and As(V), thereby eliminating any isobaric interference between ⁴⁰Ar³⁵Cl⁺ and ⁷⁵As⁺. The use of EDTA as a preservative, whose action is impaired by the high calcium concentrations typical of these types of groundwater, resulted in marked oxidation during storage. The use of HCl is therefore indicated for analytical methods in which chloride-rich matrices are not problematical. The groundwaters analysed by IC–ICP–MS were found to contain between 5 and 770 ng As mL^–1 exclusively as inorganic arsenic species. As(III)/total-As varied between 0 and 0.94.     

General characteristics of\bar pp interactions at low energies in terms of principal axis and impact parameter variables

The reaction configuration in momentum and position space has been investigated in detail from exclusive final states in \(\bar pp\) interactions at centre of mass energies 2.01 and 2.96 GeV. In momentum space one finds a tendency towards a planar configuration at low multiplicities. In position space, one sees the average impact parameter decreasing with increasing multiplicity. At large multiplicities, events become more phase-space like i.e., more central whereas at lower multiplicities the effect ofp _t damping can be seen.     

Lung surfactant dysfunction in tuberculosis: effect of mycobacterial tubercular lipids on dipalmitoylphosphatidylcholine surface activity

In pulmonary tuberculosis, Mycobacterium tuberculosis bacteria reside in the alveoli and are in close proximity with the alveolar surfactant. Mycolic acid in its free form and as cord factor, constitute the major lipids of the mycobacterial cell wall. They can detach from the bacteria easily and are known to be moderately surface active. We hypothesize that these surface-active mycobacterial cell wall lipids could interact with the pulmonary surfactant and result in lung surfactant dysfunction. In this study, the major phospholipid of the lung surfactant, dipalmitoylphosphatidylcholine (DPPC) and binary mixtures of DPPC:phosphatidylglycerol (PG) in 9:1 and 7:3 ratios were modelled as lung surfactant monolayers and the inhibitory potential of mycolic acid and cord factor on the surface activity of DPPC and DPPC:PG mixtures was evaluated using Langmuir monolayers. The mycobacterial lipids caused common profile changes in all the isotherms: increase in minimum surface tension, compressibility and percentage area change required for change in surface tension from 30 to 10 mN/m. Higher minimum surface tension values were achieved in the presence of mycolic acid (18.2 ± 0.7 mN/m) and cord factor (13.28 ± 1.2 mN/m) as compared to 0 mN/m, achieved by pure DPPC film. Similarly higher values of compressibility (0.375 ± 0.005 m/mN for mycolic acid:DPPC and 0.197 ± 0.003 m/mN for cord factor:DPPC monolayers) were obtained in presence of mycolic acid and cord factor. Thus, mycolic acid and cord factor were said to be inhibitory towards lung surfactant phospholipids. Higher surface tension and compressibility values in presence of tubercular lipids are suggestive of an unstable and fluid surfactant film, which will fail to achieve low surface tensions and can contribute to alveolar collapse in patients suffering from pulmonary tuberculosis. In conclusion a biophysical inhibition of lung surfactant may play a role in the pathogenesis of tuberculosis and may serve as a target for the development of new drug loaded surfactants for this condition.     

An efficient stereoselective synthesis of (E)- and (Z)-trisubstituted alkenes from unactivated Baylis-Hillman adducts using NaBH4/CuCl2·2H2O

A convenient and facile stereoselective synthesis of (E)- and (Z)-trisubstituted alkenes has been achieved by treatment of unactivated Baylis-Hillman adducts with NaBH₄ in the presence of CuCl₂·2H₂O at room temperature for 15 min.     

Synthesis and characterization of poly(arylene ether)s derived from 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl

A series of poly(arylene ether)s were successfully prepared by aromatic, nucleophilic substitution reactions with various perfluoroalkyl‐activated bisfluoromonomers with 4,4′‐bishydroxybiphenyl and 4,4′‐bishydroxyterphenyl. 4,4′‐Bishydroxyterphenyl was synthesized through the Grignard coupling reaction of magnesium salt of 4‐bromoanisole with dibromobenzene followed by demethylation with pyridine–hydrochloride. The products obtained by the displacement of fluorine atoms exhibited good inherent viscosity, up to 0.77 dL/g, and number‐average molecular weights up to 69,300. These poly(arylene ether)s showed very good thermal stability, up to 548 °C for 5% weight loss according to thermogravimetric analysis under synthetic air, and high glass‐transition temperatures, up to 259 °C according to differential scanning calorimetry, depending on the exact repeat unit structure. These polymers were soluble in a wide range of organic solvents, such as N‐methylpyrrolidone, dimethylformamide, tetrahydrofuran, toluene, and CHCl₃, and were insoluble in dimethyl sulfoxide and acetone. Thin films of these poly(arylene ether)s showed good transparency and exhibited tensile strengths up to 132 MPa, moduli up to 3.34 GPa, and elongations at break up to 84%, depending on their exact repeating unit structures. These values are comparable to those of high‐performance thermoplastic materials such as poly(ether ether ketone) (PEEK) and Ultem poly(ether imide) (PEI). These poly(arylene ether)s exhibited low dielectric constants. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 55–69, 2002     

Absorption spectroscopic study of synergistic extraction of praseodymium with benzoyl acetone in presence of crown ether

The extraction behaviour of Pr(III) from aqueous nitric acid medium employing benzoylacetone has been studied in presence of two crown ethers, viz., 15-crown-5 and benzo-15-crown-5 in chloroform medium using UV-vis absorption spectroscopy. The binary equilibrium constant (logk(ex)) for the complex [Pr(benzoylacetonate)(NO3(-))2(H(2)O)] in organic phase was found to be 1.170. The overall equilibrium constants (logK) for the ternary species [Pr(benzoylacetonate)(crown ether)(NO3(-))(2)] were estimated to be 4.01 and 4.41 for 15-crown-5 and benzo-15-crown-5, respectively. The trend in the equilibrium constant values were very much in accordance with the nature of substitution of the donor moiety. The extraction of Pr(III) by the benzoylacetone-crown ether combination was maximum at pH 3.0 and extraction decreases with increase in pH. It has been found that the extent of extraction of Pr(III) in organic phase as the binary as well as ternary complex [Pr(benzoylacetonate)(NO3(-))(2)(H(2)O)] and [Pr(benzoylacetonate)(crown ether)(NO3(-))(2)] increases with increase in concentration of the ligand. Similar trend is observed in the extraction by only donors. Enthalpies and entropies of formation for the ternary extraction process have been estimated. In addition, the effect of NaNO(3) as foreign salt was also studied and it was observed that with increase in ionic strength, percentage extraction increases.     

Protein surface-assisted enhancement in the binding affinity of an inhibitor for recombinant human carbonic anhydrase-II

We elaborate on a novel strategy for enhancing the binding affinity of an active-site directed inhibitor by attaching a tether group, designed to interact with the surface-exposed histidine residue(s) of enzymes. In this approach, we have utilized the recombinant form of human carbonic anhydrase-II (hCA-II) as the enzyme source and benzenesulfonamide and its derivatives as inhibitors. The steady-state kinetic and the ligand binding data revealed that the attachment of iminodiacetate (IDA)-Cu(2+) to benzenesulfonamide (via a triethylene glycol spacer) enhanced its binding affinity for hCA-II by about 40-fold. No energetic contribution of either IDA or triethylene glycol spacer was found (at least in the ground state of the enzyme-inhibitor complex) when Cu(2+) was stripped off from the tether group-conjugated sulfonamide derivative. Arguments are presented that the overall strategy of enhancing the binding affinities of known inhibitors by attaching the IDA-Cu(2+) groups to interact with the surface-exposed histidine residues will find a general application in designing the isozyme-specific inhibitors as potential drugs.     

5: 6-Benzoquinaldinic acid as an analytical reagent: Determination of thorium and zirconium

Thorium and zirconium are determined in the presence of rare earths, alkaline earths and magnesium, when precipitated from weakly acid solution with 5:6-benzoquinaldinic acid. Thorium is completely precipitated at pH 3.0 as Th(C₁₄H₈O₂N)₄, but though zirconium is precipitated at the lower pH of 1.8, its composition is not stoichiometric and hence is ignited to the oxide before weighing. Co-precipitation of magnesium and alkaline earths is prevented by the addition of ammonium chloride.     

Rhodium(I)-catalyzed carbonyl allenylation versus propargylation via redox transmetalation across tetragonal tin(II) oxide

[reaction: see text] A reagent combination of beta-SnO and catalytic [Rh(COD)Cl](2) in THF-H(2)O promotes the reaction of propargyl bromides and aldehydes and directs the regioselectivity toward the formation of either allenic alcohols or homopropargylic alcohols. This highly regioselective either/or transformation proceeds via a transmetalation from rhodium to tin, in which metallotropic rearrangement between a propargylmetal and allenylmetal is arrested.     

Two-prong inhibitors for human carbonic anhydrase II

The enzyme inhibitors are usually designed by taking into consideration the overall dimensions of the enzyme's active site pockets. This conventional approach often fails to produce desirable affinities of inhibitors for their cognate enzymes. To circumvent such constraints, we contemplated enhancing the binding affinities of inhibitors by attaching tether groups, which would interact with the surface exposed amino acid residues. This strategy has been tested for the inhibition of human carbonic anhydrase II. Benzenesulfonamide serves as a weak inhibitor for the enzyme, but when it is conjugated to iminodiacetate-Cu2+ (which interacts with the surface-exposed His residues) via a spacer group, its binding affinity is enhanced by about 2 orders of magnitude. This "two-prong" approach is expected to serve as a general strategy for converting weak inhibitors of enzymes into tight-binding inhibitors.