Wannier-Stark effect on surface states

A recursive Green-function (RGF) technique is used to study the surface states of an electrified solid. The concatenating nature of the method leads to a continued-fraction form of the RGF, which can be expressed as a ratio of Bessel functions. The surface density of states (SDOS), derived from the RGF, reveals a quasi-Stark-ladder distribution of the energy levels at the surface atom. The dependence of the SDOS on the applied field and surface perturbation parameters is discussed.     

Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

Inductively coupled plasma mass spectrometry and atomic emission spectrometry coupled to high-performance liquid chromatography for speciation and detection of organotin compounds

Inductively coupled plasma mass spectrometry (ICP/MS) is utilized as a detector for several organotin species separated by high-performance liquid chromatography. Detection limits obtained by ICP/MS are 3 orders of magnitude lower than those obtained with inductively coupled plasma atomic emission spectrometry (ICP/AES) detection under the same chromatographic conditions. Chromatographic detection limits are higher than conventional solution nebulization for the same compound by a factor of 20. Ion-exchange chromatography yields linear response over 3 orders of magnitude, while ion pair chromatography gives a linear response of only 2 orders of magnitude as a result of poor resolution. The relative standard deviation for the injection of 20 ng of tin compounds is less than 10%.     

The first structural characterization of a phosphonium amide: synthesis, isolation and molecular structure of (Ph3PEt)(NPh2)

The first isolation of a phosphonium amide, (Ph₃PEt)⁺(NPh₂)⁻, obtained via the deprotonation of a secondary amine (diphenylamine) with a phosphorus ylide (triphenylphosphonium ethylide), is described. An X-ray crystal structure provides the first observation of an essentially ion-separated Ph₂N⁻ anion in the solid state, though weak association with Ph₃PEt⁺ cations take plac through C---H…N hydrogen bonding. Cryoscopic and NMR spectroscopic data suggest that this association is not maintained in benzene solution.     

Ligand-assisted reduction of osmium tetroxide with molecular hydrogen via a [3+2] mechanism

Osmium tetroxide is reduced by molecular hydrogen in the presence of ligands in both polar and nonpolar solvents. In CHCl3 containing pyridine (py) or 1,10-phenanthroline (phen), OsO4 is reduced by H2 to the known Os(VI) dimers L2Os(O)2(mu-O)2Os(O)2L2 (L2 = py2, phen). However, in the absence of ligands in CHCl3 and other nonpolar solvents, OsO4 is unreactive toward H2 over a week at ambient temperatures. In basic aqueous media, H2 reduces OsO4(OH)n(n-) (n = 0, 1, 2) to the isolable Os(VI) complex, OsO2(OH)4(2-), at rates close to that found in py/CHCl3. Depending on the pH, the aqueous reactions are exergonic by deltaG = -20 to -27 kcal mol(-1), based on electrochemical data. The second-order rate constants for the aqueous reactions are larger as the number of coordinated hydroxide ligands increases, k(OsO4) = 1.6(2) x 10(-2) M(-1) s(-1) < k(OsO4(OH)-) = 3.8(4) x 10(-2) M(-1) s(-1) < k(OsO4(OH)2(2-)) = 3.8(4) x 10(-1) M(-1) s(-1). The observation of primary deuterium kinetic isotope effects, k(H2)/k(D2) = 3.1(3) for OsO4 and 3.6(4) for OsO4(OH)-, indicates that the rate-determining step in each case involves H-H bond cleavage. Density functional calculations and thermochemical arguments favor a concerted [3+2] addition of H2 across two oxo groups of OsO4(L)n and argue against H* or H- abstraction from H2 or [2+2] addition of H2 across one Os=O bond. The [3+2] mechanism is analogous to that of alkene addition to OsO4(L)n to form diolates, for which acceleration by added ligands has been extensively documented. The observation that ligands also accelerate H2 addition to OsO4(L)n highlights the analogy between these two reactions.     

The vibrational spectrum of (trimethylenemethane)iron tricarbonyl

A vibrational assignment for the trimethylenemethane molecule, in [C(CH₂)₃]Fe(CO)₃, has been proposed for the first time. CC₃ stretches were found at 1348 (E) and 918 cm⁻¹ (A₁), with skeletal deformations at 802 cm⁻¹ (A₁, out-of-plane), and 471 cm⁻¹ (E, in plane). The Fe(CO)₃ vibrations were closely similar to those in analogous complexes.     

Semiempirical local spin: Theory and implementation of the ZILSH method for predicting Heisenberg exchange constants of polynuclear transition metal complexes

The local spin formalism ( 3 ) for computing expectation values 〈S_A · S_B〉 that appear in the Heisenberg spin model has been extended to semiempirical single determinant wave functions. An alternative derivation of expectation values in restricted and unrestricted cases is given that takes advantage of the zero differential overlap (ZDO) approximation. A formal connection between single determinant wave functions (which are not in general spin eigenfunctions) and the Heisenberg spin model was established by demonstrating that energies of single determinants that are eigenfunctions of the local spin operators with eigenvalues corresponding to high‐spin radical centers are given by the same Heisenberg coupling constants {J_AB} that describe the true spin states of the system. Unrestricted single determinant wave functions for transition metal complexes are good approximations of local spin eigenfunctions when the metal d orbitals are local in character and all unpaired electrons on each metal have the same spin (although spins on different metals might be reversed). Good approximations of the coupling constants can then be extracted from local spin expectation values 〈S_A · S_B〉 energies of the single determinant wave functions. Once the coupling constants are obtained, diagonalization of the Heisenberg spin Hamiltonian provides predictions of the energies and compositions of the spin states. A computational method is presented for obtaining coupling constants and spin‐state energies in this way for polynuclear transition metal complexes using the intermediate neglect of differential overlap Hamiltonian parameterized for optical spectroscopy (INDO/S) in the ZINDO program. This method is referred to as ZILSH, derived from ZINDO, Davidson's local spin formalism, and the Heisenberg spin model. Coupling constants and spin ground states obtained for 10 iron complexes containing from 2 to 6 metals are found to agree well with experimental results in most cases. In the case of the complex [Fe₆O₃(OAc)₉(OEt)₂(bpy)₂]⁺, a priori predictions of the coupling constants yield a ground‐state spin of zero, in agreement with variable‐temperature magnetization data, and corroborate spin alignments proposed earlier on the basis of structural considerations. This demonstrates the potential of the ZILSH method to aid in understanding magnetic interactions in polynuclear transition metal complexes. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem, 2003     

Photochemical reactions of allyl and crotyl halides with cyclopentadienyl-chromium, -molybdenum and -tungsten complexes

[MoCl(CO)₃(η⁵-C₅H₅)] on photolysis with allyl or crotyl halides C₅H₄RX gives Mo^IV complexes [MoX₂(CO)(η³-C₃H₄R)(η⁵-C₅H₅)] (R = H, X = Cl, Br, I; R = Me, X = Cl, Br). [WCl(CO)₃(η⁵-C₅H₅)] under similar conditions gives trihalides [WX₃(CO)₂(η⁵-C₅H₅)] (X = Cl, Br) on reaction with C₃H₅Cl and C₃H₅Br while [WCl(CO)₃(η⁵-C₅H₄SiMe₃)] and [CrI(CO)₃(η⁵-C₅H₅)] react with allyl chloride to give [WCl₃(CO)₂(η⁵-C₅H₄SiMe₃)] and [CrCl₂(η⁵-C₅H₅)] respectively.     

Biocompatible polymers for antibody support on gold surfaces

The elimination or minimization of non-specific protein adsorption from serum is critical for the use of surface plasmon resonance (SPR) sensors for in vitro and in vivo analysis of complex biological solutions. The ultimate goals in this application are to minimize non-specific adsorption of protein and to maximize analyte signal. A reduction of the non-specific protein adsorption from serum of up to 73% compared to carboxymethylated-dextran 500 kDa (CM-dextran) was achieved following a survey of eight biocompatible polymers and 10 molecular weights of CM-dextran. These coatings minimize non-specific adsorption on the sensor while also serving as immobilization matrices for antibody fixation to the probes. Polymers including polysaccharides: CM-dextrans, CM-hyaluronic acid, hyaluronic acid, and alginic acid were investigated. Humic acid, polylactic acid, polyacrylic acid, orthopyridyldisuldfide–polyethyleneglycol–N-hydroxysuccinimide (OPSS–PEG–NHS), and a synthesized polymer; polymethacrylic-acid-co-vinyl-acetate (PMAVA) were also used. The non-specific protein adsorption reduction was measured over a 14 day period at 0 °C for each polymer. Calibration curves using some of these polymers were constructed to show the performance and low detection limit possibilities of these new antibody supports. For many of the polymers, this is the first demonstration of employment as an antibody support for an optical or surface active sensor. CM-dextran is the polymer offering the largest signal for the antigen detection. However, the biocompatible polymers demonstrate a greater stability to non-specific binding in serum. These biocompatible polymers offer different alternatives for CM-dextran.