Structural characterization of chondroitin/dermatan sulfate oligosaccharides from bovine aorta by capillary electrophoresis and electrospray ionization quadrupole time-of-flight tandem mass spectrometry

An analytical approach based on high-performance capillary electrophoresis (CE) in conjunction with electrospray ionization quadrupole time-of-flight tandem mass spectrometry (ESI-QTOF-MS/MS) has been developed for providing the basis to obtain new insights into the domain structure of the glycosaminoglycan (GAG) moiety of proteoglycans. The feasibility and performance of the off-line CE/ESI-QTOF-MS approach in GAG oligosaccharide analysis were assessed by screening a chondroitin/dermatan sulfate (DS) oligosaccharide mixture obtained from bovine aorta by enzymatic depolymerization by chondroitin B lyase. The CS/DS mixture was analyzed by CE using 50 mM ammonium acetate, pH 12.0, dissolved in aqueous methanol (2:3; v/v), as a CE carrier. Structural identification of the GAG components was achieved using off-line CE/nanoESI-QTOF-MS and-MS/MS experiments. ESI-QTOF instrumental parameters were found to play an important role in the MS screening of the CE-separated GAG species. By optimizing the ESI conditions, oligosaccharides differing in chain length and degree of sulfation could be detected. The building block composition, the size of the carbohydrate chain, as well as structural features of the repeating HexA-GalNAc, HexA-GalNAc(S) units, have been determined using MS/MS by applying collision-induced dissociation at low energies. Cleavage of GAG chains by chondroitin B lyase occurs with formation of structural markers useful for identification of IdoA-containing domains.     

Polystyrene/thermoplastic starch blends with different plasticizers

Conventional plastics has a large impact in increasing the environment’s pollution. That’s why the interest has turned towards novel partially and completely biodegradable polymers. In this work, blends of polystyrene and thermoplastic starch with glycerol and Buriti (Mauritia flexuosa L.) oil as plasticizers were prepared. Samples were analyzed using TG/DTG and DSC techniques. The TG results indicated that the blends with Buriti oil are thermally more stable than those with glycerol. The DSC analysis that Buriti oil provides a higher degree of plasticization of PS, compared to the blends plasticized using glycerol under the studied conditions.     

Synthesis of jasplakinolide analogues containing a novel omega-amino acid

The synthesis of the omega-amino acid 4 is described utilizing a two-dimensional synthesis strategy combined with an enzymatic differentiation of homotopic ester groups. The amino acid 4 features two non-bonded interactions that result in conformational constraints on a cyclic construct. This amino acid was incorporated into the four macrolactams 17, 22, 31, and 37. The ring in 17 and 22 is 18-membered, whereas 31 and 37 have a 19-membered ring. The pairs with the same ring size differ in a N-methyl group. For the larger macrolactams (31 and 37) conformational analysis showed that the macrocyclic rings are somewhat more rigid than in the natural lead, the depsipeptide jasplakinolide. Nevertheless, their conformations are comparable to the natural product. There are no intramolecular hydrogen bonds, neither is the cis-rotamer populated in the N-methyl compound 37. Due to the increased flexibility of the smaller macrolactams 17 and 22 and signal overlap, a distinct solution structure could not be obtained for these compounds. The amino acid 4 should be useful for restricting the conformation of other small peptides.     

Investigation of conditions allowing the synthesis of acrylamide-based monolithic microcolumns for capillary electrochromatography and of factors determining the retention of aromatic compounds on these stationary phases

The influence of the cross-linker (concentration), the porogen (lyotrophic salt) and the solvent type as well as the type and concentration of up to three "functional", i.e., interactive monomers on the morphology and the chromatographic properties of acrylamide-based hydrophilic monoliths are investigated. High total monomer concentrations favored polymers with a rigid rather than gel-like structure. High cross-linker concentrations also favor the formation of a nodular structure. The addition of a lyotrophic salt favors the formation of small nodules especially at higher monomer concentration; the pore size of the polymer can also be modulated through the salt concentration. Suitable monoliths were further investigated as potential stationary phases for capillary electrochromatography (CEC). Depending on the type and concentration of the monomers, plate numbers between 50,000 and 100,000 were routinely obtained. The standard deviation of the run-to-run reproducibility was below 2% and that of the batch-to-batch reproducibility below 5%. A set of nine hydrophobic and polar aromatic compounds (all noncharged) was used to investigate the retention mechanism. Possible candidates for chromatographic interaction and retention in these monoliths are the hydrophobic polymer backbone itself and the alkyl, carbonyl, hydroxy, amino, amide, and charged groups introduced by the various functional monomers. Judging from our results, the carbonyl and the hydroxy functions, as well as the hydrophobic polymer backbone can be supposed to be the main sites of interaction. The charged but also the alkyl functions seem to be less important in this regard. The polymerization conditions and especially the composition of the reaction mixture have a strong influence on the behavior of the final column.     

Dark and Photochemical Interactions of Dimethyltetrahydrobenzoangelicin with DNA

A study of dark interaction and photoreaction between 4,6-dimethyltetrahydrobenzoangelicin (THBA) and DNA is described. 4,6-Dimethyltetrahydrobenzoangelicin is a furocoumarin derivative in which 4'and 5'carbons are linked by a four-methylene bridge. In spite of the bulky aliphatic ring, THBA forms a complex with DNA in the dark and, on UVA irradiation, reacts with pyrimidine bases of DNA yielding monoadducts only involving its furan side double bond. Two main photoproducts form: they derive from a C₄-cycloaddition to thymine and cytosine, respectively, and account for 56% and 39% of the total photoreaction yield. Both show cis-syn configuration. Two other isomers, one with thymine and one with cytosine, formed with so much lower yield ( ca 3 and 1%, respectively) that their structure could not be assigned. Furthermore, in spite of its angular structure, THBA induces a small number of crosslinks in DNA.     

Mass spectrometric characterization of two novel inflammatory peptides from the venom of the social wasp Polybia paulista

The social wasp P. paulista is relatively common in southeast Brazil causing many medically important stinging incidents. The seriousness of these incidents is dependent on the amount of venom inoculated by the wasps into the victims, and the characteristic envenomation symptoms are strongly dependent on the types of peptides present in the venom. In order to identify some of these naturally occurring peptides available in very low amounts, an analytical protocol was developed that uses a combination of reversed-phase and normal-phase high-performance liquid chromatography (HPLC) of wasp venom for peptide purification, with matrix-assisted laser desorption/ionization time-of-flight post-source decay mass spectrometry (MALDI-Tof-PSD-MS) and low-energy collision-induced dissociation (CID) in a quadrupole time-of-flight tandem mass spectrometry (QTof-MS/MS) instrument for peptide sequencing at the sub-picomole level. The distinction between Leu and Ile was achieved both by observing d-type fragment ions obtained under CID conditions and by comparison of retention times of the natural peptides and their synthetic counterparts (with different combinations of I and/or L at N- and C-terminal positions). To distinguish the isobaric residues K and Q, acetylation of peptides was followed by Q-Tof-MS analysis. The primary sequences obtained were INWLKLGKMVIDAL-NH(2) (MW 1611.98 Da) and IDWLKLGKMVMDVL-NH(2) (MW 1658.98 Da). Micro-scale bioassay protocols characterized both peptides as presenting potent hemolytic action, mast cell degranulation, and chemotaxis of polymorphonucleated leukocyte (PMNL) cells. The primary sequences and the bioassay results suggest that these toxins constitute members of a new sub-class of mastoparan toxins, directly involved in the occurrence of inflammatory processes after wasp stinging.     

Human topoisomerase I poisoning: docking protoberberines into a structure-based binding site model

Summary Using the X-ray crystal structure of the human topoisomerase I (top1) – DNA cleavable complex and the Sybyl software package, we have developed a general model for the ternary cleavable complex formed with four protoberberine alkaloids differing in the substitution on the terminal phenyl rings and covering a broad range of the top1-poisoning activities. This model has the drug intercalated with its planar chromophore between the −1 and +1 base pairs flanking the cleavage site, with the nonplanar portion pointing into the minor groove. The ternary complexes were geometry-optimized and relative interaction energies, computed by using the Tripos force field, were found to rank in correct order the biological potency of the compounds; in addition, the model is also consistent with the top1-poisoning inactivity of berberine, a major prototype of the protoberberine alkaloids. The model might serve as a rational basis for elaboration of the most active compound as a lead structure, in order to develop more potent top1 poisons as next generation anti-cancer drugs.     

Sol-Gel Fabrication and Properties of Silica Cores of Optical Fibers Doped with Yb3+, Er3+, Al2 O3 or TiO2

Optical cores of preforms for drawing optical fibers doped with Er3+ and Yb3+ were fabricated by the sol-gel method with the aim of increasing the thickness of glass layers coated in a single coating cycle and to determine the relation between the preparation conditions and optical properties of the fibers. Al2O3-P2O5-SiO2 and TiO2-P2O5-SiO2 glasses have been studied as matrices for entrapping the rare-earth elements. Input sols have been prepared from silicon and titanium alkoxides, AlCl3, ErCl3, YbCl3, POCl3, water and a modifier under acidic catalysis of HCl. The sols were coated on the inner wall of a silica substrate tube and the gel layers were sintered at high temperatures up to 2000°C after which the tube was collapsed into the preform. Continuous and homogenous glass films with the maximum thickness of about 8 m were fabricated. The influence of high-temperature heat treatment of the layers on their composition and optical attenuation was observed. The amplified stimulated emission of Er3+ around 1.55 m was measured under the excitation of the fibers by an Nd : YAG laser at 1.064 m.     

Indirekte inversvoltammetrische Bestimmung von Elementen unter Anwendung von Verdr?ngungsreaktionen

Zusammenfassung Unter Anwendung von Verdrängungsreaktionen lassen sich nichtamalgambildende Elemente inversvoltammetrisch indirekt bestimmen. Eisen läßt sich indirekt über die Freisetzung von Blei aus dem Blei-ÄDTA-Komplex und inversvoltammetrische Bestimmung des freigesetzten Bleianteils bis zu einer Konzentration von etwa 4·10^–8 Mol/l erfassen. Die relative Standardabweichung betrug im Konzentrationsbereich 4·10^–7 bis 2·10^–6Mol/l ± 10%.Indirekte Bestimmungen von Calcium, Strontium und Barium sind über die Verdrängung von Zink aus dem Zink-ÄDTA-Komplex in Gegenwart von Ammoniak als Hilfskomplexbildner möglich. Im Konzentrations-bereich 6·10^–7 bis 3·10^–6 Mol/l ergab sich eine relative Standardabweichung von 6%.

---

Summary Elements forming no amalgams can be determined indirectly by inverse voltammetry using exchange reactions. Iron displacing lead from lead-EDTA complex is determined by anodic stripping voltammetry of lead down to a concentration of about 4×10^–8 M. In the concentration range from 4×10^–7 to 2×10^–6 M a relative standard deviation of ±10% has been obtained. Indirect determinations of calcium, strontium and barium are possible by displacement of zinc from zinc-EDTA in presence of ammonia. In the concentration range from 6×10^–7 to 3×10^–6 M the relative standard deviation amounts to 6%.

     

Simultaneous Determination of Trichothecenes A, B, and D in Maize Food Products by LC–MS–MS

Two new methods of analysis, based on liquid chromatography–tandem mass spectrometry, for simultaneous determination of trichothecenes A, B, and D in maize flour and oil have been developed and validated in accordance with European Commission decision 2002/657/EC (recovery, CCα, CCβ, and precision). The trichothecenes were extracted from maize flour by matrix solid-phase dispersion, with recoveries ≥79%, and from maize oil by liquid–liquid extraction, with recoveries ≥78%. Limits of quantitation ranged between 0.03 and 50 μg kg^?1, depending on the electrospray response to each analyte and on the matrix. Monitoring of flour and oil samples with this HPLC–MS–MS method revealed the presence of deoxynivalenol, T-2 toxin, and diacetoxyscirpenol at very low concentrations.