Crystal structures and spectroscopic characterization of radical cations and dications of oligothiophenes stabilized by annelation with bicyclo[2.2.2]octene units: sterically segregated cationic oligothiophenes

The remarkably stable SbF(6)(-) salts of the radical cations of bithiophene 1(2T) and terthiophene 1(3T), completely surrounded by bicyclo[2.2.2]octene (BCO) units, were obtained by one-electron oxidation of the neutral precursors with NO(+)SbF(6)(-), and their solid-state structures were determined by X-ray crystallography. In these radical cations, the presence of quinoidal character was apparent, as shown by the increased planarity and by comparison of the bond lengths with those of the neutral precursors. The shortest intermolecular pi-pi distances in the crystal structure of 1(2T)(*)(+)SbF(6)(-) (distance between two sp(2) carbon atoms, 4.89 A) and 1(3T)(*)(+)SbF(6)(-) (distance between an sp(2) carbon and a sulfur atom, 3.58 A) were found to be longer than the sums of the van der Waals radii of the corresponding atoms. In accord with this, no apparent change was observed in ESR and UV-vis-NIR spectra of solutions of 1(2T)(*)(+) and 1(3T)(*)(+) upon lowering the temperature, indicating that the pi- (or sigma-) dimer formation is inhibited in solution as well as in the solid state. The dications 1(2T)(2+) and 1(3T)(2+) were generated with the stronger oxidant SbF(5) in CH(2)Cl(2) at -40 degrees C and characterized by NMR spectroscopy. In the (1)H NMR spectra, two conformers were observed for each dication of both 1(2T)(2+) (transoid (t) and cisoid (c)) and 1(3T)(2+) (t,t and c,t) at room temperature due to the high rotational barrier around the inter-ring bond(s) between thiophene rings, which was caused by the enhanced double bond character of these bonds following two-electron oxidation. This is supported by DFT calculations (B3LYP/6-31G(d)), which predicted the rotational barriers in the dications of unsubstituted bithiophene and terthiophene to be 27.6 and 22.9 kcal mol(-)(1), respectively. In the case of quaterthiophene and sexithiophene surrounded by BCO frameworks 1(4T) and 1(6T), oxidation with even one molar equivalent of NO(+)SbF(6)(-) afforded the dication salts 1(4T)(2+)2SbF(6)(-) and 1(6T)(2+)2SbF(6)(-), which were isolated as stable single crystals and allowed the X-ray crystallography. In their crystal structures, the cationic pi-systems became planar again due to the great contribution of quinoidal resonance structures, and the pi-systems, which were arrayed in a parallel geometry, were also segregated by the steric effect of BCO units. The degree and tendency of changes in the bond lengths of thiophene rings of 1(4T)(2+) and 1(6T)(2+) as compared with neutral precursors were similar to those of 1(2T)(*)(+)SbF(6)(-) and 1(3T)(*)(+)SbF(6)(-), respectively, implying that the contribution of quinoidal character is modulated by the amount of positive charge per thiophene unit.     

Particle formation in the hydrolysis of tetraethyl orthosilicate in pH buffer solution

Particle formation in the hydrolysis and condensation of tetraethyl orthosilicate (TEOS) was studied by varying pH (9.5-11) with the basic catalysts NH3, methylamine (MA), and dimethylamine (DMA) in the presence of 5 mol/m3 CH3COOH, which was chosen to suppress time variations of pH and ionic strength during the reaction. Spherical particles were formed for MA and DMA at catalyst concentrations of 0.02-0.2 kmol/m3 and for NH3 at catalyst concentrations of 0.1-1.5 kmol/m3. In a common range of catalyst concentrations for spherical particle formation, average particle size was largest for DMA and smallest for NH3. Hydrolysis rate of TEOS could be quantified by the use of buffer systems as a function of TEOS and OH- concentrations. A specific relation was not found between the hydrolysis and the particle size. The zeta potential of silica particles measured in the reaction solvent was in the order DMA < MA < NH3, and ionic strength, estimated from pH in the reactions, was in the order DMA approximately equal to MA > NH3. This suggested that the particle sizes were controlled by electrostatic particle interactions.     

An entirely new methodology for synthesizing perfluorinated compounds: synthesis of perfluoroalkanesulfonyl fluorides from non-fluorinated compounds

A new synthetic procedure for the preparation of perfluoroalkanesulfonyl fluorides utilizing liquid-phase direct fluorination with elemental fluorine has been developed. Direct fluorination of a partially fluorinated ester, which has alkanesulfonyl fluoride in the end, was synthesized from non-fluorinated counterparts and perfluorinated acid fluoride according to the PERFECT process, gave the desired perfluorinated product in moderate yield as well as by-products arising from CS bond cleavage. The results of the direct fluorination of some model substrates suggest that the CS bond cleavage occurred due to radical formation at the α-position rather than the β-position.     

Investigation of the release test method for the topical application of pharmaceutical preparations: release test of cataplasm including nonsteroidal anti-inflammatory drugs using artificial sweat

A simple procedure for determining the in vitro release profile of a cataplasm for use in a quality control procedure has been developed. Since the disk assembly in the USP for patch dosage forms was unsuited for use in a release test due to penetration of the dissolution medium into the cataplasm from the screw part of the device and the cataplasm swelled, new holders were designed. In the new holder, a cataplasm is held in position by sandwiching it between a stainless-steel O-ring and a silicon O-ring on the stainless steel board, 2 acrylic boards hold the O-rings and the stainless steal board, and the entire assembly is placed at the bottom of the dissolution vessel. The release profile was determined using the "Paddle over Disk" method in USP26. Furthermore, in order to prevent the swelling of the cataplasm, artificial sweat was used as the dissolution medium. The release profiles of the nine marketed brands of cataplasm containing indomethacin, ketoprofen, and flurbiprofen, respectively, were determined over a 12-h period. By adjusting the ion concentration and volume of the media, and the release surface-area of the cataplasm exposed to each medium, the procedure was found to be reproducible for in vitro release characterization of nine marketed brands. This shows that this technique can be used as a quality control tool for assuring product uniformity.     

Hydrogenation of carbon dioxide and aryl isocyanates by a tetranuclear tetrahydrido yttrium complex. Isolation, structures, and CO2 insertion reactions of methylene diolate and mu3-oxo yttrium complexes

The reaction of carbon dioxide with a tetranuclear tetrahydrido yttrium complex [(C5Me4SiMe3)Y(mu-H)]4(L) (L = Me3SiCC(H)C(H)CSiMe3) (1) rapidly afforded the corresponding bis(methylene diolate) complex [(C5Me4SiMe3)Y]4(mu-O2CH2)2(L) (2), while the reactions of an aryl isocyanate with 1 led to selective formation of the mu3-oxo complex [(C5Me4SiMe3)Y]4(mu-O)( mu-H)2(L) (5) or [(C5Me4SiMe3)Y]4(mu-O)2(L) (7), depending on the substrate ratio. Both the methylene diolate and the oxo complexes can undergo CO2 insertion reactions to give the corresponding carbonate complexes. These reactions not only yield a new series of polynuclear yttrium complexes having novel structures but also shed new light on the mechanistic aspects of the heterogeneous hydrogenation of COmicron2. The high reactivity of the polynuclear mu3-oxo yttrium complexes 5 and 7 could also make them novel molecular models for study of metal oxide-supported catalysts.     

Elastic response of single DNA molecules exhibits a reentrant collapsing transition

We measured the elastic response of single DNA molecules at various concentrations of the trivalent cation, spermidine. When added spermidine caused the DNA to collapse, the force-extension curves showed either plateaus or stick-release patterns depending on the concentration. The periodic stick-release response determines a characteristic length, which may reflect toroidal supercoiling. At high concentrations of spermidine, we observed the reelongation of single molecules of collapsed DNA. Thus condensation occurs between lower and upper critical concentrations, verifying that the transition is reentrant as theoretically predicted.     

Phase Manipulation between c(4 x 2) and p(2 x 2) on the Si(100) surface at 4.2 K

Phase manipulation between c(4x2) and p(2x2) on the Si(100) surface has been demonstrated at 4.2 K for the first time using a low-temperature scanning tunneling microscope. We have discovered that it is possible to change the c(4x2) surface into the p(2x2) surface, artificially, through a flip-flop motion of the buckling dimers by using a sample bias voltage control. Also, scanning at a negative bias voltage or applying a pulse voltage can restore the c(4x2) surface. The STM images as a function of bias voltage and tunneling current reveal the interesting dynamics of the buckling dimers on the long debated surface. Our results will show that energetic tunneling electrons are most likely responsible for the observed phase transition from c(4x2) to p(2x2).     

Equivalent cross relaxation rate image for decreasing a false negative case of sentinel lymph node biopsy

In the breast carcinamas, sentinel lymph node biopsy (SLNB) attracts attention as technique to be settled by axillary lymph node metastasis, but existence of a false negative case is a problem. Equivalent cross relaxation rate image (ECRI) is the measurement method that we can evaluate a change of organization structure quantitatively by magnetic resonance imaging. We executed axillary ECRI as a purpose with decreasing a false negative case of SLNB. ECRI related to a macroscopic image, and it was possible to evaluate yes or no of axillary lymph node metastasis. ECRI is the useful method to evaluate adaptability of SLNB.