Classification Performance of a Low Pressure Differential Mobility Analyzer for Nanometer-sized Particles

Size distribution measurements and classification tests by a low pressure differential mobility analyzer (LPDMA) for nanometer-sized silver particles and cesium iodide particles under low pressure conditions (123–300 Torr) were performed using a transmission electron microscope (TEM) and the tandem DMA technique. When the ratio of the sheath gas flow rate and the aerosol gas flow rate was set at 5 : 1, the targeted sizes calculated from the classification voltage applied to the LPDMA at 160 Torr are found to be in good correlation with the count mean Feret diameter obtained from the TEM observation of the particles collected after a classification ranging from 6 to 25 nm, although the targeted sizes set by the LPDMA were approximately 15% greater than the count mean Feret diameter measured by the TEM after classification. The geometric standard deviations of DMA-classified particles measured by TEM and those obtained from the tandem DMA method ranged from 1.08 to 1.17 and from 1.05 to 1.13, respectively. They were slightly greater than the ideal geometric standard deviations (1.05) of the particles classified with the LPDMA, which was calculated by neglecting the broadening effects due to Brownian diffusion. We experimentally demonstrated the validity of our LPDMA system for size measurements and classification of the nanometer-sized particles under low pressure conditions.     

Effects of OH concentration and temperature on NO emission characteristics of turbulent non-premixed CH4/NH3/air flames in a two-stage gas turbine like combustor at high pressure

This study examined the effects of OH concentration and temperature on the NO emission characteristics of turbulent, non-premixed methane (CH₄)/ammonia (NH₃)/air swirl flames in two-stage combustors at high pressure. Emission data were obtained using large-eddy simulations with a finite-rate chemistry method from model flames based on the energy fraction of NH₃ (E_NH3) in CH₄/NH₃ mixtures. Although NO emissions at the combustor exit were found to be significantly higher than those generated by CH₄/air and NH₃/air flames under both lean and stoichiometric primary zone conditions, these emissions could be lowered to approximately 300 ppm by employing far-rich equivalence ratios (?) of 1.3 to 1.4 in the primary zone. This effect was possibly due to the lower OH concentrations under far-rich conditions. An analysis of local flame characteristics using a newly developed mixture fraction equation for CH₄/NH₃/air flames indicated that the local temperature and NO and OH concentration distributions with local ? were qualitatively similar to those in NH₃/air flames. That is, the maximum local NO and OH concentrations appeared at local ? of 0.9, although the maximum temperature was observed at local ? of 1.0. Both the temperature and OH concentration were found to gradually decrease with the partial replacement of CH₄ with NH₃. Consequently, NO emissions from CH₄/NH₃ flames were maximized at E_NH3 in the range of 20% to 30%, after which the emissions decreased. Above 2100 K, the NO emissions from CH₄/NH₃ flames increased exponentially with temperature, which was not observed in NH₃/air flames because of the lower flame temperatures in the latter. But, the maximum NO concentration in CH₄/NH₃ flames was occurred at a temperature slightly below the maximum temperature, just as in NH₃/air flames. The apparent exponential increase in NO emissions from CH₄/NH₃ flames is attributed to a similar trend in the OH concentration at high temperatures.     

Oxidative dimerization of azoles via copper(II)/silver(I)-catalyzed CH homocoupling

When several azole derivatives such as imidazole, thiazole, and oxazole are treated with a catalyst system of copper(II)/silver(I) under oxygen atmosphere, oxidative dimerization at the CH bond of the 2-position takes place to afford the corresponding bisazoles up to 86% yield.     

Dienyl homoallyl alcohols via palladium catalyzed ene-type reaction of aldehydes with 1,3-dienes

The combination of Pd catalyst and Xantphos ligand in the presence of Et(3)B nicely promotes the allylation of aldehydes with conjugated dienes to provide dienyl homoallyl alcohols in excellent yields. The reaction occurs selectively at the C-C double bond bearing higher electron density.     

Solution‐processable colorless polyimides derived from hydrogenated pyromellitic dianhydride with controlled steric structure

This work presents novel colorless polyimides (PIs) derived from 1R,2S,4S,5R‐cyclohexanetetracarboxylic dianhydride (H″‐PMDA). Isomer effects were also discussed by comparing with PI systems derived from conventional hydrogenated pyromellitic dianhydride, that is, 1S,2R,4S,5R‐cyclohexanetetracarboxylic dianhydride (H‐PMDA). H″‐PMDA was much more reactive with various diamines than H‐PMDA, and the former led to PI precursors with much higher molecular weights. The results can be explained from the quite different steric structures of these isomers. The thermally imidized H″‐PMDA‐based films were colorless regardless of diamines because of inhibited charge‐transfer interaction. In particular, the H″‐PMDA/4,4′‐oxydianiline system simultaneously achieved a very high T_g exceeding 300 °C, high toughness (elongation at break > 70%), and good solution processability. In contrast, the H‐PMDA‐based counterparts were essentially insoluble. The outstanding solubility of the former probably results from disturbed chain stacking by its nonplanar steric structure. An advantage of chemical imidization process is also proposed. In some cases, a copolymerization approach with an aromatic tetracarboxylic dianhydride was effective to improve the thermal expansion property. The results suggest that the H″‐PMDA‐based PI systems can be promising candidates for novel high‐temperature plastic substrate materials in electronic paper displays. A potential application as optical compensation film materials in liquid crystal displays (LCD) is also proposed in this work. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Analytical aspects of cyanobacterial volatile organic compounds for investigation of their production behavior

In order to fully understand the role of volatile organic compounds (VOCs) under natural conditions, an adaptable analytical method was developed as the first step. β-Ionone, β-cyclocitral, 2-methyl-1-butanol and 3-methyl-1-butanol were simultaneously analyzed in addition to geosmin and 2-MIB using GC/MS with SPME. The slight modification of a known method allowed the simultaneous detection and quantification of these VOCs. The SIM of the 3-methyl-1-butanol was always accompanied by a shoulder peak, suggesting the presence of two compounds. In order to separate both compounds, the GC/MS conditions were optimized, and the additional peak was identified as 2-methyl-1-butanol by direct comparison of the authentic compound, indicating that the Microcystis strain always produces a mixture of 2-methyl-1-butanol and 3-methyl-1-butanol. Furthermore, it was found that 2-methyl-1-butanol and 3-methyl-1-butanol were predominant in the dissolved fractions. β-Cyclocitral was easily oxidized to provide the oxidation product, 2,6,6-trimethylcyclohexene-1-carboxylic acid, which causes the blue color formation of cyanobacteria as a consequence of acid stress. The intact acid could be satisfactorily analyzed using the usual GC/MS without derivatization.     

Tetrabenzoperipentacene: Stable Five‐Electron Donating Ability and a Discrete Triple‐Layered β‐Graphite Form in the Solid State

An oxidative ring‐closure reaction of a tetranaphthylpyrene derivative led to the synthesis of a 56 all‐carbon conjugated tetrabenzoperipentacene. In the single‐crystal X‐ray structure, three molecules make a triple‐layered cluster by π‐stacking, wherein each layer rotates by 120°, and is thus considered a petit β‐graphite. As for the optical properties, the Stokes shift is extremely small (10 cm^?1), thus indicating its remarkably rigid framework. The tetrabenzoperipentacene exhibits reversible five‐electron oxidation waves in cyclic voltammetry, and is regarded as a counterpart to the fullerene C₆₀ in terms of stable multicharge‐storage nanocarbon materials.     

High-speed monitoring of the crystallinity change in poly(lactic acid) during photodegradation by using a newly developed wide area NIR imaging system (Compovision)

We aimed to achieve wide area rapid monitoring of the crystallinity change in poly(lactic acid) (PLA) during photodegradation caused by ultraviolet (UV) light by using a newly developed near-infrared (NIR) camera (Compovison). Several kinds of PLA samples with different crystallinities and their blends with poly[(3)-(R)-hydroxybutyrate] were prepared. Their two-dimensional NIR spectra in the 1,000–2,350-nm region were measured by Compovision at a 5-min interval during photolysis. An intensity decrease of the band in the 1,900-1,925-nm region due to the second overtone of the C = O stretching vibration of PLA was observed during photolysis. This suggests that an anhydride carbonyl is produced during photolysis. The NIR image of the crystallinity change monitored by the band at 1,917 nm in the standard normal variate spectra clearly shows the inhomogeneity of crystal evolution. A logarithmic increase was observed for all identified areas in the PLA film; however, the time to reach the maximum crystallinity was slightly different according to the initial crystallinity of the sample. It is likely that the initial crystallinity of the sample influences the degradation speed more than the degradation amount. These imaging results have provided fundamental chemical insights into the photolytic process for PLA, and at the same time they have demonstrated that the two-dimensional spectral data obtained by Compovision are useful for process monitoring of polymers.     

Phosphorescent Ruthenium Complexes with a Nitroimidazole Unit that Image Oxygen Fluctuation in Tumor Tissue

Understanding oxygen fluctuation in a cancerous tumor is important for effective treatment, especially during radiotherapy. In this paper, ruthenium complexes bearing a nitroimidazole group are shown to report the oxygen status in tumor tissue directly. The nitroimidazole group was known to be accumulated in hypoxic tumor tissues. On the other hand, the ruthenium complex showed strong phosphorescence around 600 nm. The emission of ruthenium is quenched instantaneously by molecular oxygen due to energy transfer between triplet states of oxygen and ruthenium complex, but the emission is then recovered by the removal of oxygen. Thus, we could observe oxygen fluctuation in tumor tissue in a real‐time manner by monitoring the phosphorescence of the ruthenium complex. The versatility of the probe is demonstrated by monitoring oxygen fluctuation in living cells and tumor tissue planted in mice. The ruthenium complex promptly penetrated plasma membrane and accumulated in cells to emit its oxygen‐dependent phosphorescence. In vivo experiments revealed that the oxygen level in tumor tissue seems to fluctuate at the sub‐minute timescale.     

Interlaboratory study of DNA extraction from multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR for individual kernel detection system of genetically modified maize

In many countries, the labeling of grains, feed, and foodstuff is mandatory if the genetically modified (GM) organism content exceeds a certain level of approved GM varieties. We previously developed an individual kernel detection system consisting of grinding individual kernels, DNA extraction from the individually ground kernels, GM detection using multiplex real-time PCR, and GM event detection using multiplex qualitative PCR to analyze the precise commingling level and varieties of GM maize in real sample grains. We performed the interlaboratory study of the DNA extraction with multiple ground samples, multiplex real-time PCR detection, and multiplex qualitative PCR detection to evaluate its applicability, practicality, and ruggedness for the individual kernel detection system of GM maize. DNA extraction with multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR were evaluated by five laboratories in Japan, and all results from these laboratories were consistent with the expected results in terms of the commingling level and event analysis. Thus, the DNA extraction with multiple ground samples, multiplex real-time PCR, and multiplex qualitative PCR for the individual kernel detection system is applicable and practicable in a laboratory to regulate the commingling level of GM maize grain for GM samples, including stacked GM maize.