Room-temperature all-semiconducting sub-10-nm graphene nanoribbon field-effect transistors

Sub-10 nm wide graphene nanoribbon field-effect transistors (GNRFETs) are studied systematically. All sub-10 nm GNRs afforded semiconducting FETs without exception, with Ion/Ioff ratio up to 10(6) and on-state current density as high as approximately 2000 microA/microm. We estimated carrier mobility approximately 200 cm2/V s and scattering mean free path approximately 10 nm in sub-10 nm GNRs. Scattering mechanisms by edges, acoustic phonon, and defects are discussed. The sub-10 nm GNRFETs are comparable to small diameter (d< or = approximately 1.2 nm) carbon nanotube FETs with Pd contacts in on-state current density and Ion/Ioff ratio, but have the advantage of producing all-semiconducting devices.     

Numerical simulation of soliton and kink density waves in traffic flow with periodic boundaries

The soliton and kink–antikink density waves are simulated with periodic boundaries, by adding perturbation in the initial condition on single-lane road based on a car-following model. They are reproduced in the form of the space–time evolution of headway, both of which propagate backwards. It is found that the solitons appear only near the neutral stability line regardless of the boundary conditions, and they exhibit upward form when the initial headway is smaller than the safety distance, otherwise they exhibit downward form. Comparison is made between the numerical and analytical results about the amplitude of kink–antikink wave, and the underlying mechanism is analyzed. Besides, it is indicated that the maximal current of traffic flow increases with decreasing safety distance. The numerical simulation shows a good agreement with the analytical results.     

Preparation and properties of GaFeO<Subscript>3</Subscript> thin films grown at various oxygen pressures by pulsed laser deposition

We report the results of an analytical investigation on the bronze alloys of the Porta del Paradiso by Lorenzo Ghiberti using a portable X-ray fluorescence instrument. The study was carried out on five panels of the bronze artwork. It provided information on the artist’s selection of the sculptural alloys and on some manufacturing details of interest for understanding the development of the art foundry during the early Renaissance. PACS 81.05.Bx; 81.70.Jb; 82.80.Ej     

金纳米颗粒的有序制备及其光学特性

采用纳米球蚀刻技术在石英衬底上制备了不同高度的金纳米颗粒阵列.通过扫描电子显微镜对其表面形貌进行了观测,表明金纳米颗粒为有序分布的三棱柱结构.通过红外—紫外吸收光谱仪在190—900nm波长范围内对其光吸收特性进行了测量, 并成功观测到了金纳米颗粒表面等离子体振荡效应引起的光吸收峰,结果表明随着金纳米颗粒高度的增加,其吸收峰的位置向短波方向移动(蓝移).同时对金纳米颗粒的光吸收特性进行了基于离散偶极子近似的理论计算,并与实验结果进行了比较. 关键词： 纳米球蚀刻技术 金纳米颗粒 离散偶极子近似     

推广的失活网络动力学同步优化

在不改变网络度分布的条件下,研究了推广的失活网络的同步行为. 应用特征值比R来衡量网络的同步能力,发现同步能力可以通过改变结构参数——激活节点数M来进行优化.特征值比R随M的变化非常敏感,激活节点数M越大,特征值比R越小,同步能力就越强,且在一定范围内遵循R～M^-2.0的幂律关系.通过引入结构微扰,该网络的同步能力也可以得到有效优化. 关键词： 推广的失活网络 同步 特征值比 优化     

热泵中定容水箱保温率的研究

提出定容水箱保温率的概念及其方程。为此,本实验对定容水箱自然冷却过程中各热力参数进行了测量。根据实验所测数据及相关公式推导,得到保温率方程的经验函数关系式。同时,通过对测量曲线和经验函数曲线的拟合,验证了定容水箱保温率方程。     

热敏电阻温度特性的测定

针对热敏电阻温度特性在实验检测中存在的问题,设计出一种新的检测装置,结合传统的数据处理,改革实验教学方法,从而较准确地检测出典型热敏电阻温度特性参数,对热敏电阻温度特性有了一定的了解．     

Compositional analysis of a polymer-induced liquid-precursor (PILP) amorphous CaCO3 phase

Amorphous calcium carbonate (ACC) has been of keen interest in the biomimetics field because of recent evidence which suggests it plays an important role in biomineralization. In this report, an in vitro model system is used to examine the composition of an amorphous phase generated by polyanionic process-directing agents, such as the sodium salt of polyaspartic acid (Pasp), which is considered a simple mimic to the proteins associated with calcific biominerals. This additive leads to the formation of a highly hydrated, amorphous mineral precursor to calcium carbonate (CaCO₃), referred to as a polymer-induced liquid-precursor (PILP) phase. The precursor phase was collected by centrifugation, and the quantity of precursor phase and the water content were determined. It was found that Pasp promotes and stabilizes the amorphous precursor, which has a composition that steadily changes with time as the polymer and water are excluded. Elemental analysis was used to investigate the role of the polymer in influencing the calcium/carbonate ratio, the water content, and the amount of precursor phase. Raman and ATR-FTIR spectroscopy were used to compare the compositions of the precursor phases generated with different polymeric concentrations. The role of Pasp in generating and stabilizing the ACC precursor phase is discussed.     

Electromagnetic Form Factors of Λ Hyperon in the Vector Meson Dominance Model and a Possible Explanation of the Near-Threshold Enhancement of the e+e-→ Λ(Λ) Reaction

The near-threshold e+e-→ Λ(Λ) reaction is studied with the assumption that the production mechanism is due to a near-Λ(Λ)-threshold bound state.The cross sectio...