Use of dicyclohexano-18-crown-6 to separate traces of silver(I) from potassium thiocyanate in hydrochloric acid media,and determination of the silver by atomic absorption spectrometry

Solvent extraction with 0.05 mol L(-1) dicyclohexano-18-crown-6 (DC18C6) in 1,2-dichloroethane, coupled with flame atomic absorption spectrometry (AAS), has been investigated as a new method for separation of trace amounts of silver(I) from 0.05 mol L(-1) potassium thiocyanate in 1.0 mol L(-1) hydrochloric acid media and quantification of the amount of silver present. The method is based on the formation of an extractable ion-association product, [DC18C6.K](+)[Ag(SCN)(2)](-), with a metal-to-crown ether ratio of 1:1 (as derived from slope analysis data). Stripping of the extracted silver(I) in the 1,2-dichloroethane phase was achieved within 5 min by use of 3.0 mol L(-1) potassium thiocyanate. Reducing the concentration of acid in the sample solution to 0.1 mol L(-1) improved the preconcentration factor severalfold. Excellent tolerance of the proposed method to the presence of foreign ions in solution with silver(I) was demonstrated. A detection limit of 13 ng mL(-1) was derived from the mean value of the blank plus three times its standard deviation. The method was used to determine traces of silver(I) after separation from gold(III), platinum(IV), and palladium(II) matrices on the basis of extractability differences with 18-membered crown ethers under specified conditions. The efficiency of the adopted ion-association mechanism for silver(I) extraction was apparent from the average recovery of 96% for spiked standards by use of the back-washing technique. The proposed extraction procedure was applied to the determination of traces of silver(I) in a selection of chemical reagents.     

Synthesis, Chemical Characterization, and Molecular Structure of Au8{Fe(CO)4}4(dppe)2 and Au6Cu2{Fe(CO)4}4(dppe)2

The new Au₈{Fe(CO)₄}₄(P^P)₂ and Au₆Cu₂{Fe(CO)₄}₄(P^P)₂ (P^P=dppm, dppe) neutral cluster compounds were isolated in good yields by condensation of the [Au₃{Fe(CO)₄}₂(P^P)]^- anions with Au(SEt₂)Cl and CuCl, respectively, and have been characterized by IR, NMR and microanalyses. The molecular structures of Au₈{Fe(CO)₄}₄(dppe)₂ and Au₆Cu₂{Fe(CO)₄}₄(dppe)₂ have been determined by X-ray diffraction studies. Both molecules adopt a stereogeometry of the heavy atoms consisting of a triangulated and corrugated ribbon twisted around the elongation direction. Contrary to the expectations the latter displays the two copper atoms in the sites of highest connectivity. This implies that site exchange between copper and gold occurs during the synthesis.     

Modular bis(oxazoline) ligands for palladium catalyzed allylic alkylation: unprecedented conformational behaviour of a bis(oxazoline) palladium eta3-1,3-diphenylallyl complex

New families of enantiopure bis(oxazolines) with 4,5-trans (5 a-g) or 4,5-cis (6 c) stereochemistry at the individual rings have been prepared in high yield. Their eta(3)-allyl palladium complexes (8 a-g, 9 c and 10) have been used as catalytic precursors in allylic alkylation reactions with excellent enantioselectivities (up to 96 %) for the trans oxazoline derivatives, while Pd/6 c system was inactive. NMR studies on palladium eta(3)-1,3-diphenylallyl intermediates (11 a, c and e) showed the presence of syn/syn- and syn/anti-allyl isomers in solution; this resembles the first example of eta(3)-eta(1)-eta(3) isomerism in Pd allylic complexes containing bis(oxazolines) derived from malonic acid.     

Gadolinium‐Decorated Silica Microspheres as Redox‐Responsive MRI Probes for Applications in Cell Therapy Follow‐Up

The redox microenvironment within a cell graft can be considered as an indicator to assess whether the graft is metabolically active or hypoxic. We present a redox‐responsive MRI probe based on porous silica microparticles whose surface has been decorated with a Gd‐chelate through a disulphide bridge. Such microparticles are designed to be interspersed with therapeutic cells within a biocompatible hydrogel. The onset of reducing conditions within the hydrogel is paralleled by an increased clearance of Gd, that can be detected by MRI.     

Weighted proximity search

Journal of Heuristics - Proximity search is an iterative method to solve complex mathematical programming problems. At each iteration, the objective function of the problem at hand is replaced by...     

Factor probabilistic distance clustering (FPDC): a new clustering method

Factor clustering methods have been developed in recent years thanks to improvements in computational power. These methods perform a linear transformation of data and a clustering of the transformed data, optimizing a common criterion. Probabilistic distance (PD)-clustering is an iterative, distribution free, probabilistic clustering method. Factor PD-clustering (FPDC) is based on PD-clustering and involves a linear transformation of the original variables into a reduced number of orthogonal ones using a common criterion with PD-clustering. This paper demonstrates that Tucker3 decomposition can be used to accomplish this transformation. Factor PD-clustering alternatingly exploits Tucker3 decomposition and PD-clustering on transformed data until convergence is achieved. This method can significantly improve the PD-clustering algorithm performance; large data sets can thus be partitioned into clusters with increasing stability and robustness of the results. Real and simulated data sets are used to compare FPDC with its main competitors, where it performs equally well when clusters are elliptically shaped but outperforms its competitors with non-Gaussian shaped clusters or noisy data.     

Model-based sensitivity analysis of a fluidised-bed bioreactor for mercury uptake by immobilised Pseudomonas putida cells

A model-based sensitivity analysis was performed in order to evaluate the importance of the individual operating parameters of a three-phase fluidised-bed biological reactor used for removing mercury ions from wastewater. The parameters analysed involve the immobilised biomass load (bacteria P. putida) on alginate beads, particle size, inlet flow-rate, mercury ion loads in the fed wastewater, and the solid fraction in the reactor. Predictions were generated by using pseudo-first-order, Michaelis-Menten, or pseudo-Haldane kinetic models. The results highlight the major influence of the biomass/solid load and of the liquid residence time on the reactor efficiency. Also, the resultant significant differences in the model predictions underline the importance of using a more accurate kinetic model for process design and control purposes.     

Electrochemical Behaviour and Square Wave Voltammetry of the Rice Herbicides Molinate,Bensulfuron-Methyl,Mefenacet and Thiobencarb

Abstract

Cyclic, differential pulse and square wave voltammetry were applied to develop an electroanalytical procedure for the determination of a group of herbicides used to treat rice crops: molinate, bensul-ruron-methyl, mefenacet and thiobencarb. The oxidation mechanism causes adsorption problems and consequent poisoning of the electrode surface by the products of the electrochemical reaction. Parameters such as pH, frequency and electrochemical electrode surface treatment were optimized. The analytical methodology developed using square wave voltammetry was applied to the determination of molinate and bensulfuron-methyl in simple or mixed commercial products.     

Ancient silver extraction in the Montevecchio mine basin (Sardinia, Italy): micro-chemical study of pyrometallurgical materials

Different pyrometallurgical materials such as slags, refractory materials and thermally treated lead ores likely related to smelting and extractive processes and chronologically related to Punic and Roman periods (IV–III BC) have been found at Bocche di Sciria and Conca e Mosu in the Montevecchio mine basin (south western Sardinia, Italy), where archaeological findings and classical authors locate extractive metallurgy activities since pre-Roman times. By means of the combined use of X-ray diffraction (XRD), scanning electron microscopy (SEM) combined with energy-dispersive X-ray spectrometry (EDS), selected-area X-ray photoelectron spectroscopy (XPS) and optical microscopy (OM), micro-chemical and micro-structural investigations have been carried out in order to identify the nature of the pyrometallurgical materials, to decipher the processes carried out there and their technological steps and to determine the technological level of competence reached by the ancient metallurgists. The results confirm that the findings can be associated with smelting and extractive processes carried out close to the metal ore deposits first for the argentiferous lead production and, then, for the silver recovery via a cupellation process. Finally, the results disclose the high level of technological competence of the ancient metallurgists able to carry out complex high-temperature processes to treat the argentiferous lead ores and to recover low amounts of silver via high-temperature lead-selective oxidation.