New In Vitro-In Silico Approach for the Prediction of In Vivo Performance of Drug Combinations

Pharmacokinetic (PK) studies improve the design of dosing regimens in preclinical and clinical settings. In complex diseases like cancer, single-agent approaches are often insufficient for an effective treatment, and drug combination therapies can be implemented. In this work, in silico PK models were developed based on in vitro assays results, with the goal of predicting the in vivo performance of drug combinations in the context of cancer therapy. Combinations of reference drugs for cancer treatment, gemcitabine and 5-fluorouracil (5-FU), and repurposed drugs itraconazole, verapamil or tacrine, were evaluated in vitro. Then, two-compartment PK models were developed based on the previous in vitro studies and on the PK profile reported in the literature for human patients. Considering the quantification parameter area under the dose-response-time curve (AUC_effect) for the combinations effect, itraconazole was the most effective in combination with either reference anticancer drugs. In addition, cell growth inhibition was itraconazole-dose dependent and an increase in effect was predicted if itraconazole administration was continued (24-h dosing interval). This work demonstrates that in silico methods and AUC_effect are powerful tools to study relationships between tissue drug concentration and the percentage of cell growth inhibition over time.     

Determination of ethyl glucuronide in hair samples by liquid chromatography/electrospray tandem mass spectrometry

A method for the determination of ethyl glucuronide (EtG) in hair samples, using liquid chromatography/electrospray tandem mass spectrometry (LC/ESI-MS/MS), was developed and validated. The treatment of hair samples was as follows: to 100 mg of washed (dichloromethane followed by methanol, 1 ml each) and cut (1-2 mm) material, 700 microl of water, 20 microl of internal standard solution (pentadeuterated EtG, D(5)-EtG, 500 microg/l) and 20 microl of methanol were added. Samples were incubated at 25 degrees C overnight and then ultrasonicated for 2 h. Finally, 8 microl of the centrifuged solution (13,000 rpm) were analyzed by LC/ESI-MS/MS in negative ion mode. The surviving ions of EtG and D(5)-EtG were monitored together with the following MRM transitions: m/z 221 --> 75, m/z 221 --> 85 (EtG) and m/z 226 --> 75, m/z 226 --> 85 (D(5)-EtG). The method exhibited a mean correlation coefficient better than 0.9998 over the dynamic range (3-2000 pg/mg). The lower limit of quantification (LLOQ) and the limit of detection (LOD) were 3 and 2 pg/mg respectively. The intra- and interday precision and accuracy were studied at four different concentration levels (3, 5, 56 and 160 pg/mg) and were always better than 7% (n = 5). Matrix effects did not exceed 20%. The method was applied to several hair samples taken from autopsies of known alcoholics, from patients in withdrawal treatment, from social drinkers, from adult teetotalers and from children not exposed to ethanol, with EtG concentrations globally ranging from < or =2 to 4180 pg/mg.     

Comparison of ultra-performance liquid chromatography and high-performance liquid chromatography for the determination of priority pesticides in baby foods by tandem quadrupole mass spectrometry

Determination of 16 priority pesticides and transformation products specified in the EU Baby Food Directive 2003/13/EC has been compared using high-performance liquid chromatography (HPLC) and ultra-performance liquid chromatography (UPLC) coupled to tandem quadrupole mass spectrometry (MS/MS). Prior to analysis, co-extractives were removed from acetonitrile extracts using dispersive solid-phase extraction (SPE) with primary secondary amine (50 mg). Extracts spiked with pesticides at 1 microg kg(-1) yielded average recoveries in the range 85-119%, with relative standard deviations less than 17%. The HPLC-MS/MS and UPLC-MS/MS multi-residue methods developed are simple, rapid and suitable for the quantification and confirmation of the 16 priority pesticides in fruit-, potato- and cereal-based baby food at 1 microg kg(-1). The major advantages of UPLC, using 1.7 microm particles, over HPLC are the speed of analysis, the narrower peaks (giving increased signal-to-noise ratio) and improved confirmation for the targeted pesticides in the analyses of baby foods.     

Auto-assembling of ditopic macrocyclic lanthanide chelates with transition-metal ions. Rigid multimetallic high relaxivity contrast agents for magnetic resonance imaging

PhenHDO3A is a ditopic ligand featuring a tetraazacyclododecane unit substituted by three acetate arms and one 6-hydroxy-5,6-dihydro-1,10-phenanthroline group (PhenHDO3A = rel-10-[(5R,6R)-5,6-dihydro-6-hydroxy-1,10-phenantholin-5-yl)-1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid). This ligand was specially designed so as to obtain highly stable heteropolymetallic assemblies. PhenHDO3A has been prepared starting from phenanthroline epoxide and either a triprotected tetraazacyclododecane or tert-butyl triester of N,N',N' '-tetraazacyclododecane-triacetic acid. The latter yields PhenHDO3A in a single step. PhenHDO3A forms kinetically stable lanthanide complexes (acid-catalyzed kinetic constant kH = (1.2 +/- 0.2) x 10(-3) s(-1) M(-1)) whose solution structure has been deduced from a quantitative analysis of the paramagnetic shifts and the longitudinal relaxation times of the proton nuclei of YbPhenHDO3A. The alcohol group of the dihydro-phenanthroline unit remains coordinated to the encapsulated metal ion despite the steric crowding brought about by this group. Furthermore, the complexes are monohydrated, as shown by luminescence lifetime measurements on EuPhenHDO3A solutions. Relaxivity titrations at 20 MHz clearly indicate that the phenanthroline unit of GdPhenHDO3A is available for the spontaneous formation of highly stable tris complexes with the Fe2+ and Ni2+ ions. The water-exchange times and the rotational correlation times of GdPhenHDO3A and Fe(GdPhenHDO3A)32+ have been deduced from variable temperature 17O NMR studies and from nuclear relaxation dispersion curves. Despite rather slow water-exchange rates (taum0 = 1.0-1.2 x 10(-6) s), relaxivity gains of 90% have been observed upon the formation of the heterometallic tris complexes. The latter rotate about four times more slowly (taur0= 398 ps) than the monomeric unit (taur0 = 105 ps) and their relaxivity is, accordingly, twice as high. The relaxivity of the tris complexes between 10 and 50 MHz is comparable to relaxivities reported for Gd3+-containing dendrimers of much higher molecular weights. The high relaxivity of the tris-PhenHDO3A lanthanide complexes is attributed to their internal rigidity.     

Nanoparticle size effects on methanol electrochemical oxidation on carbon supported platinum catalysts

The particle size effect observed on the performance of Pt/C electrocatalysts toward the methanol oxidation reaction (MOR) has been investigated with differential electrochemical mass spectrometry (DEMS). The investigation has been conducted under both potentiodynamic and potentiostatic conditions as research on methanol electrochemical oxidation is closely related to interest in direct methanol fuel cells. The particle size effect observed on the MOR is commonly regarded as a reflection of different Pt-CO and Pt-OH bond strengths for different particle sizes. This work focuses mainly on the mechanism of methanol dehydrogenation on platinum which is central to the problem of the optimization of the efficiency of methanol electro-oxidation by favoring the CO(2) formation pathway. It was found that the partitioning of the methanol precursor among the end products on supported platinum nanoparticles is strongly dependent on particle size distribution. Also, it is postulated that the coupling among particles of different sizes via soluble products must be considered in order to understand the particle size effects on the observed trends of product formation. An optimum particle size range for efficiently electro-oxidizing methanol to CO(2) was found between 3 and 10 nm, and loss in efficiency is mostly related to the partial oxidation of methanol to formaldehyde on either too small or too large particles. The possible reasons for these observations are also discussed.     

Maximality of the signless Laplacian energy

We study the problem of determining the graph with $n$ vertices having largest signless Laplacian energy. We conjecture it is the complete split graph whose independent set has (roughly) $2n∕3$ vertices. We show that the conjecture is true for several classes of graphs. In particular, the conjecture holds for the set of all complete split graphs of order $n$, for trees, for unicyclic and bicyclic graphs. We also give conditions on the number of edges, number of cycles and number of small eigenvalues so the graph satisfies the conjecture.     

Simultaneous determination of copper, mercury and zinc in water with a tailored fluorescent bipyridine ligand entrapped in silica sol-gel

A novel fluorescent ligand, (4-[(E)-2-(4'-methyl-2,2'-bipyridin-4-yl)vinyl]phenol) (abbreviated BSOH), has been designed and prepared for simultaneous determination of heavy metals in water. Its photophysical and photochemical properties in the absence and in the presence of Cd(II), Cu(II), Hg(II), Ni(II) and Zn(II) were determined, and the respective complexation constants (7.4 × 10(3)-2.8 × 10(8) l mol(-1)) and stoichiometries were extracted thereof. The Stern-Volmer emission intensity and lifetime plots indicate an efficient static quenching of the indicator dye with the heavy metals. The BSOH fluorescent reagent has been successfully immobilised in a silica sol-gel matrix for automation of the analytical method, and the sensing phase demonstrated a reversible response to Cu(II), Hg(II) and Zn(II) but not to Cd(II) and Ni(II). Characterisation of the sensor showed that its response to those heavy metals is linear in the 2.5 to 50 μmol l(-1) range, with a response time (t (90)) on the order of 100 min, providing detection limits of 9.0 × 10(-7), 4.7 × 10(-7) and 2.9 × 10(-7) mol l (-1) for Zn(II), Cu(II) and Hg(II), respectively. Due to the stability of the immobilised ligand, which presented no leaching from the sol-gel matrix, the simultaneous determination of the three cations in water was feasible by employing multivariate calibration techniques coupled to fluorescence quenching measurements. The sensor was validated with recovery tests by addition of Cu(II) and Hg(II) ions to spring waters, providing results with standard errors lower than 4.1 μmol l (-1).