Evaluation of Water-in-Crude-Oil Emulsion Stability Using Critical Electric Field: Effect of Emulsion Preparation Procedure and Crude Oil Properties

The critical electrical field has been used as a tool to probe water in crude emulsion stability to electrical fields in many previous studies. Given the increasing importance of this metric, this study investigates factors that are important to the reproducibility of the measurement and the effect of emulsion preparation variables on the critical electric field. It was observed that the emulsion preparation procedure has a strong effect on the measured critical electric field due to droplet size effects. Furthermore, the effect of crude oil properties on the critical electric field was investigated using emulsions from different oils but with the same average droplet diameter, where it was found that the measurement was dominated by crude oil viscosity.     

Evaluation of differential protein expression in Haliclona aquarius and sponge-associated microorganisms under cadmium stress

A comparative proteomic approach was used to assess differentially expressed proteins in marine sponges after 36 h of exposure to cadmium (Cd). After separation performed by 2-D polyacrylamide gel electrophoresis, 46 protein spots indicated differential expression, and 17 of these proteins were identified by electrospray ionization quadrupole time-of-flight mass spectrometry. From the proteins identified, 76 % were attributed to sponge-associated microorganisms (fungi and bacteria), and 24 % were attributed to Haliclona aquarius. Some of the proteins that were identified may be related to cell proliferation and differentiation or processes of oxidative stress repair and energy procurement. An integrated evaluation based on spot expression levels and the postulated functions of these proteins allowed a more accurate evaluation of the stress caused to the sponge holobiont system by cadmium exposure. This study could provide new insights into the use of a proteomic approach in the marine sponge to assess the effects of Cd pollution in a marine environment.     

Inclusion Complexes of Ionic Liquids and Cyclodextrins: Are They Formed in the Gas Phase?

The interaction of imidazolium-based ionic liquids with α- and β-cyclodextrins was investigated by electrospray ionization mass spectrometry with variable collision induced dissociation energy and quantum chemical gas-phase calculations. The center-of-mass energy at which 50 % of a precursor ion decomposes (E_cm,1/2) was determined for the isolated [cyclodextrin + cation]⁺ or [cyclodextrin + anion]^– adduct ions of imidazolium-based ionic liquids with different alkyl chain lengths combined with a large set of anions, such as chloride, bromide, bis(trifluoromethylsulfonyl)imide, tetrafluoroborate, hexafluorophosphate, trifluoromethanesulfonate, methanesulfonate, dicyanamide, and hydrogensulfate. Moreover, both symmetric and asymmetric imidazolium cationic cores were evaluated. The relative interaction energies in the adduct ions were interpreted in terms of the influence of cation/anion structures and their inherent properties, such as hydrophobicity and hydrogen bond accepting ability, in the complexation process with the cyclodextrins. The trends observed in the mass spectral data together with quantum-chemical calculations suggest that in the gas phase, cations and anions will preferentially interact with the lower or upper rim of the cyclodextrin, respectively, as opposed to what has been reported in condensed phase where the formation of an inclusion complex between ionic liquid and cyclodextrin is assumed.

Increased Antioxidant Activity and Changes in Phenolic Profile of Kalanchoe pinnata (Lamarck) Persoon (Crassulaceae) Specimens Grown Under Supplemental Blue Light

Antioxidant compounds protect plants against oxidative stress caused by environmental conditions. Different light qualities, such as UV‐A radiation and blue light, have shown positive effects on the production of phenols in plants. Kalanchoe pinnata (Lamarck) Persoon (Crassulaceae) is used for treating wounds and inflammations. Some of these beneficial effects are attributed to the antioxidant activity of plant components. We investigated the effects of blue light and UV‐A radiation supplementation on the total phenol content, antioxidant activity and chromatographic profile of aqueous extracts from leaves of K. pinnata. Monoclonal plants were grown under white light, white plus blue light and white plus UV‐A radiation. Supplemental blue light improved the antioxidant activity and changed the phenolic profile of the extracts. Analysis by HPLC of supplemental blue‐light plant extracts revealed a higher proportion of the major flavonoid quercetin 3‐O‐α‐l ‐arabinopyranosyl (1→2) α‐l ‐rhamnopyranoside, as well as the presence of a wide variety of other phenolic substances. These findings may explain the higher antioxidant activity observed for this extract. Blue light is proposed as a supplemental light source in the cultivation of K. pinnata, to improve its antioxidant activity.     

On-line preconcentration and determination of Zn in natural water samples employing a styrene-divinylbenzene functionalized resin and flame atomic absorption spectrometry.

In this work, flame atomic absorption spectrometry (FAAS) was used as a detector for the determination of zinc in natural water samples with a flow-injection system coupled to solid-phase extraction (SPE). In order to promote the on-line preconcentration of zinc from samples a minicolumn packed with 35 mg of a styrene-divinylbenzene resin functionalized with (S)-2-[hydroxy-bis(4-vinylphenyl)methyl]pyrrolidine-1-carboxylic acid ethyl esther was utilized. The system operation was based on Zn(II) ion retention at pH 9.5 +/- 0.5 in such a minicolumn with analyte elution, at the back flush mode, with 1 mol L(-1) HCl directly to the FAAS nebulizer. The influence of the chemical (sample pH, buffer concentration, HCl eluent concentration and effect of the ionic strength) and flow (sample and eluent flow rates and preconcentration time) parameters that could affect the performance of the system were investigated as well as the possible interferents. At the optimum conditions, for 2 min of preconcentration time (9.9 ml of sample volume), the developed methodology presented a detection limit of 1.1 microg L(-1), a RSD of 3.5% at 10 microg L(-1) and an analytical throughput of 24 h(-1). Whereas, for 4 min of the preconcentration time (19.8 ml of sample volume) a detection limit of 0.98 microg L(-1), a RSD of 6.5% at 5 microg L(-1) and a sampling frequency of 13 h(-1) are reported.     

Control strategies for timestep selection in finite element simulation of incompressible flows and coupled reaction–convection–diffusion processes

We propose two timestep selection algorithms, based on feedback control theory, for finite element simulation of steady state and transient 2D viscous flow and coupled reaction–convection–diffusion processes. To illustrate performance of the schemes in practice, we solve Rayleigh–Benard–Marangoni flows, flow across a backward‐facing step, unsteady flow around a circular cylinder and chemical reaction systems. Numerical experiments confirm that the feedback controllers produce in some cases a very smooth stepsize variation, suggesting that robust control algorithms are possible. These experiments also show that parameter selection can improve timesteps when co‐ordinated with the convergence control of non‐linear iterations. Further, computational cost of the selection procedures is negligible, since they involve only storing a few extra vectors, computation of norms and evaluation of kinetic energy. Copyright © 2004 John Wiley & Sons, Ltd.     

Surface tension of chain molecules through a combination of the gradient theory with the CPA EoS

Despite the interest in systems containing non-associating compounds such as alkanes and fluoroalkanes or associating compounds like alkanols, their vapor–liquid interfaces have received little quantitative attention. Aiming at modeling the interfacial tensions of several families of chain molecules, a combination of the density gradient theory of fluid interfaces with the Cubic-Plus-Association (CPA) equation of state was developed. The density gradient theory is based on the phase equilibria of the fluid phases separated by the interface, for what an adequate equation of state is required.     

Aging mechanisms of oil-in-water emulsions based on a bioemulsifier produced by Yarrowia lipolytica

The aging mechanisms of oil-in-water emulsions prepared with Yansan, a bioemulsifier produced by a Brazilian wild strain of Yarrowia lipolytica, IMUFRJ 50682, in glucose-based fermentation medium, were studied and compared with those prepared with Gum Arabic. Oil-in-water emulsions obtained by combining three different organic phases, perfluoro-n-hexane, n-hexadecane and toluene, with two aqueous buffers of different pH, and two bioemulsifiers, were studied through the evolution of the mean droplet size. The emulsions were prepared by sonication and their droplet size distribution was followed for 60 days at 301 K using image analysis. The results indicate that the aging mechanisms of the studied emulsions depend mainly on the bioemulsifier and on the pH of the medium. It is shown that the emulsions containing Gum Arabic age by coalescence while Yansan-based emulsions change their aging mechanisms from coalescence at pH 3 to molecular diffusion at pH 7.     

Free energy barrier for dissociation of the guanosine monophosphate anion in water

We report free energy barriers for the ground-state dissociation of the guanosinenucleotide anion in solution, employing implicit and explicit solvation models. The latterwas based on the Free Energy Perturbation technique and Monte Carlo simulations. For thelowest-energy structure, both solvation models indicate a solvent-induced transition froma dipole-bound state in the gas phase to a π^? valence state in solution. The freebarrier estimates obtained from explicit and implicit solvation are in fair agreement witheach other, although significantly overestimated in comparison to a previously reportedexplicit solvation model based on ab initio molecular dynamics simulations. Accounting forcorrections related to the different DFT functionals used in the present and previousstudies significantly improves the agreement.