High-efficiency 60 W TEM(00) Nd:YVO(4) oscillator pumped at 888 nm

We propose a technique for pumping Nd:YVO(4) with high optical power at 888nm while making absorption independent of the pump light polarization state. This is especially suitable for systems end pumped by high-power, high-brightness fiber-coupled diode sources associated with long vanadate crystals to effectively spread the heat load in a large volume. A compact 60 W output, 55% optical efficiency cw TEM(00) oscillator was demonstrated.     

47 W, 6 ns constant pulse duration, high-repetition-rate cavity-dumped Q-switched TEM(00) Nd:YVO(4) oscillator

We report on a cavity-dumped Q-switched TEM(00) Nd:YVO(4) oscillator offering a unique combination of high power, constant short pulse duration, and high repetition rate, suppressing the gain dependence of pulse duration in classical Q-switched oscillators. Its performance is compared with that of the same oscillator operated in a classical Q-switched regime, demonstrating the much higher peak powers achievable with this technique, especially at high repetition rates. Up to 31 W of 532 nm green light was generated by frequency doubling in a noncritical phase matched LBO crystal, corresponding to 70% conversion efficiency.     

Influence of homocysteine on the physical structure and molecular mobility of elastin network in cultured arteries

The thermal and dielectric properties of the elastin network were investigated in arteries cultured with physiological and pathological concentrations of homocysteine, an aminoacid responsible of histological impairments in human arteries. The glass transition of this amorphous protein was investigated by Differential Scanning Calorimetry (DSC). To explore the molecular dynamics of the elastin network in the nanometer range, we used Thermally Stimulated Currents (TSC), a dielectric technique running at low frequency and measuring the dipolar reorientations in proteins subjected to a static electrical field. Combining TSC and DSC experiments with determination of the activation parameters of relaxation times reveals the molecular mobility of the proteins. The major differences in the relaxation behavior of elastin between arteries cultured with physiological and pathological concentrations of homocysteine are discussed.     

Electrical conductivity improvement of aeronautical carbon fiber reinforced polyepoxy composites by insertion of carbon nanotubes

An increase and homogenization of electrical conductivity is essential in epoxy carbon fiber laminar aeronautical composites. Dynamic conductivity measurements have shown a very poor transversal conductivity. Double wall carbon nanotubes have been introduced into the epoxy matrix to increase the electrical conductivity. The conductivity and the degree of dispersion of carbon nanotubes in epoxy matrix were evaluated. The epoxy matrix was filled with 0.4 wt.% of CNTs to establish the percolation threshold. A very low value of carbon nanotubes is crucial to maintain the mechanical properties and avoid an overload of the composite weight. The final carbon fiber aeronautical composite realized with the carbon nanotubes epoxy filled was studied. The conductivity measurements have shown a large increase of the transversal electrical conductivity. The percolative network has been established and scanning electron microscopy images confirm the presence of the carbon nanotube conductive pathway in the carbon fiber ply. The transversal bulk conductivity has been homogenized and improved to 10^? 1 S·m^? 1 for a carbon nanotubes loading near 0.12 wt.%.     

Voice gender differences and separation of simultaneous talkers in cochlear implant users with residual hearing

Perception of a target voice in the presence of a competing talker, of same or different gender as the target, was investigated in cochlear implant users, in implant-alone and bimodal (acoustic hearing in the non-implanted ear) conditions. Recordings of two male and two female talkers acted as targets and maskers, to investigate whether bimodal benefit increased for different compared to same gender target/maskers due to increased ability to perceive and utilize fundamental frequency and spectral-shape differences. In both listening conditions participants showed benefit of target/masker gender difference. There was an overall bimodal benefit, which was independent of target/masker gender difference.     

Raman characterization of passivated GaAs surfaces

The technique of Raman scattering at room temperature, is used to investigate the effect of H₂S passivation of the surface of n-type GaAs. Well-defined LO, L^- and L⁺ features are distinguished in spectra which have been recorded in z(x, y)[ovbar|zovbar] scatte ring orientation. It is observed that the ratio of the LO to L^- peak is reduced by the effects of the passivation process and that the shift of the L⁺ feature from the laser line is decreased. This latter effect, it is suggested, is caused by a decrease in free-carrier concentration due to donor neutralization by hydrogen during passivation. This neutralization effect will also affect the LO to L^- ratio and so complicate a quantitative analysis of the influence of passivation on the surface barrier potential.     

Surface, core, and structure modifications of phosphorus-containing dendrimers. Influence on the thermal stability

Three new series of phosphorus-containing dendrimers are described. Their solubility depends on the type of end groups they bear. Perfluoroalkyl chains give dendrimers soluble in chlorofluorocarbons, whereas guanidinium and pyridinium derivatives give water-soluble compounds. The thermal stability of these compounds, as well as of 19 other dendrimers of various generations, having various cores, or various end groups, or branching points is studied. The main feature of this study is that the internal structure of these dendrimers is thermally stable at least up to 376°C. The number of the generation has practically no influence, whereas the principal criterion influencing the thermal stability is the type of end groups. The water-soluble cationic dendrimers are the least stable, but even those are stable up to 225°C. For most of these dendrimers, an important percentage of mass (around 50%) is retained even at a temperature as high as 1000°C. In the best case, up to 70% of the initial mass is retained at 1000°C.     

Flame holding downstream from a co-flow injectorAccrochage d'une flamme en aval d'un injecteur co-courant

We present numerical results on the flame attachment in the downstream vicinity of the co-flow injector lip that separates the reactive fluids at injection. Two stability diagrams show the domains where the flame is anchored, blown off, or extinguished, in terms of separating plate thickness and injection velocities of both fluids. Different anchoring modes—stagnation point counter-flow holding or edge flame anchorage—are described, depending particularly on the plate rim thickness. To cite this article: C. Nicoli et al., C. R. Mecanique 334 (2006).     

Trivalent lanthanide interactions with a terdentate bis(dialkyltriazinyl)pyridine ligand studied by electrospray ionization mass spectrometry

The 2,6-bis(5,6-dialkyl-1,2,4-triazin-3-yl)pyridines (DATPs) belong to a new family of extracting agents recently developed in the framework of nuclear fuel reprocessing. These molecules exhibit exceptional properties to separate actinides(III) from lanthanides(III) in nitric acid solutions. A previous work showed that electrospray ionization mass spectrometry (ESI-MS) is a reliable technique to provide solution data such as stoichiometries and conditional stability constants of various DATP complexes with europium and evidenced the unusual capability of DiPTP [bis(di-iso-propyltriazinyl)pyridine] ligand to form 1:3 complexes in nitric acid solution. This latter result is further investigated by considering DiPTP complexation features with the complete lanthanide family. As a starting point of the experimental procedure used for stability constant evaluation, the intensity distribution of ions detected by ESI-MS is studied for solutions containing Ln(NO(3))(3) in water/methanol (1:1 v/v) with the pH value set at 2.8 and 4.6 by HNO(3) additions. At pH 2.8, the nitrate anions are found to prevent lanthanides from processes occurring within the ion source: redox phenomena or gas-phase reactions with methanol which give species such as [Ln(MeO)(2)](+). Thus, the total intensity of MS signals from [Ln(NO(3))(2)(H(2)O)(p)(MeOH)(n)](+) ions is found proportional to the metal ion concentration. At pH 4.6, with lower nitrate concentration, the nature of the species identified on mass spectra depends on the electronic properties of the lanthanide elements. It is shown that Ln(III) complexation with DiPTP leads to the exclusive formation of 1:3 complexes with the whole lanthanide series which may be due not only to the hydrophobic exterior of the ligand but also to the unusual electronic density distribution in DATP ligands as compared with other aza-aromatic ligands. The conditional stability constants of the 1:3 lanthanide(III) complexes with DiPTP have been determined at pH 2.8 and are found to increase almost regularly from La (log beta(3)(app) = 11.7 +/- 0.1) to Lu (log beta(3)(app) = 16.7 +/- 0.8). Moreover, the kinetic stability of the gas-phase 1:3 complexes obtained by electrospray has been investigated by energy-resolved collision-induced dissociation and provides useful information on the bonding and structure.