Time behavior of stressed nonhierarchical networks

In this paper it is shown, by means of simulation, that interesting time behavior is observed for damaged and overloaded networks, and that adaptive, decentralized intelligence can have a dramatic influence on the overall network performance. The time behavior of nonhierarchical networks is modeled by a system of nonlinear difference equations among global variables, and bistability is shown to exist. Using a simple adaptive control mechanism, it is shown that, depending upon the value of a certain network variable, either limit cycle or steady state behavior results. A few ideas are discussed for applications of nonhierarchical communications to cellular automata and to decision-making systems.     

Untersuchung über Natur und Eigenschaften von Hevea-Latex

Ohne Zusammenfassung Uebersetzung von H. Brehm (Dresden).     

A computational study of substituent effects on the stability and geometry of carbazole‐pyridine complexes

Hydrogen bonding between carbazole and pyridine is known to quench fluorescence emission of carbazole. Three carbazolopyridinophanes—compounds composed of carbazole and pyridine subunits such that an intramolecular hydrogen bond may exist between them—have been pursued as reversible fluorescent sensors that detect given analytes through fluorescence restoration. However, these sensors exhibit background fluorescence believed to be related to the proportion of non‐hydrogen‐bonded conformers present. In this computational investigation, the potential energy surfaces of various hydrogen‐bonded carbazole:pyridine complexes are investigated using density functional theory with the intent of explaining the observed background fluorescence for the carbazolopyridinophanes. The results indicate carbazolopyridinophane conformers most resembling the geometry of their corresponding free carbazole:pyridine complexes exhibit the least background fluorescence.     

Sparse asymptotic minimum variance based bearing estimation algorithm for a single vector hydrophone

For underwater target detection using a single vector hydrophone, sparse asymptotic minimum variance(SAMV) method is used to estimate the target bearing. The SAMV discretizes the entire scanning space and the target bearing is located at the position of the discrete direction. The SAMV algorithm utilizes the sparsity of the spatial signal to improve the estimation performance of the target bearing. Background noise level(BNL) of the bearing estimation of SAMV algorithm is lower than those of the conventional beam forming(CBF)method and minimum variance distortionless response(MVDR) method for different signal noise ratios(SNRs). When the SNR is higher than 0 d B, the direction-finding error of this algorithm is less than 2°. Moreover, the SAMV algorithm has a better dimensional orientation resolution capability. The experimental results show that the SAMV algorithm gives a bearing and time recording map with a lower BNL, which effectively verifies the effectiveness of SAMV algorithm in terms of underwater target detection.     

Die Bestimmung von Cumarin und Melilots?ure

Ohne Zusammenfassung     

离子交换色谱法分离测定磷霉素的研究

分别采用全多孔型硅胶基键合强阴离子交换柱与氨丙基键合硅胶柱，在低波长 ２００ ｎｍ 处检测，分离测定了磷霉素 探讨了流动相条件，如ｐ Ｈ 值、离子强度等对磷霉素保留及分离选择性的影响，优化分离条件，建立了一种测定磷霉素的高效液相色谱新方法方法简便、快速     

Permeability anisotropy due to consolidation of compressible porous media

The characterisation of flow through porous media is important for all solid–liquid separation and fluid transport realms. The permeability of porous media can be anisotropic and furthermore, the extent of anisotropy can be increased as a result of an applied compressive force. However, the understanding of how anisotropy develops is incomplete. An overview of research on permeability anisotropy is given and an expression for predicting anisotropy as a function of void ratio is offered. The two underlying assumptions of the proposed model are: flow in different directions occurs within the same network of pores and deformation is primarily due to the compression of the particles in the direction of the applied force rather than due to particle rearrangement. The assumption of network connectivity allows permeability anisotropy to be described as a function of flow path tortuosity only. Results are presented for hydraulic anisotropy measured in lignite that has been upgraded by a compression dewatering method known as mechanical thermal expression. The lignite permeability is shown to be up to eight times greater in the direction perpendicular to compression, suggesting that the rate of dewatering could be significantly increased by choosing the drainage to also be perpendicular to the direction of the applied compressive force. It is illustrated that the proposed anisotropy model can be used to accurately predict the experimentally determined permeability anisotropy ratios for lignite, as well as for other materials including sand, clay and kaolin.     

Separation of cannabinoids on three different mixed‐mode columns containing carbon/nanodiamond/amine‐polymer superficially porous particles

Three mixed‐mode high‐performance liquid chromatography columns packed with superficially porous carbon/nanodiamond/amine‐polymer particles were used to separate mixtures of cannabinoids. Columns evaluated included: (i) reversed phase (C₁₈), weak anion exchange, 4.6 × 33 mm, 3.6 μm, and 4.6 × 100 mm, 3.6 μm, (ii) reversed phase, strong anion exchange (quaternary amine), 4.6×33 mm, 3.6 μm, and (iii) hydrophilic interaction liquid chromatography, 4.6 × 150 mm, 3.6 μm. Different selectivities were achieved under various mobile phase and stationary phase conditions. Efficiencies and peak capacities were as high as 54 000 N/m and 56, respectively. The reversed phase mixed‐mode column (C₁₈) retained tetrahydrocannabinolic acid strongly under acidic conditions and weakly under basic conditions. Tetrahydrocannabinolic acid was retained strongly on the reversed phase, strong anion exchange mixed‐mode column under basic polar organic mobile phase conditions. The hydrophilic interaction liquid chromatography column retained polar cannabinoids better than the (more) neutral ones under basic conditions. A longer reversed phase (C₁₈) mixed‐mode column (4.6 × 100 mm) showed better resolution for analytes (and a contaminant) than a shorter column. Fast separations were achieved in less than 5 min and sometimes 2 min. A real world sample (bubble hash extract) was also analyzed by gradient elution.     

Anholonomic configuration spaces and metric tensors in finite elastoplasticity

Deformation mappings are considered that correspond to the motions of lattice defects, elastic stretch and rotation of the lattice, and initial defect distributions. Intermediate (i.e., relaxed) configuration spaces associated with these deformation maps are identified and then classified from the differential-geometric point of view. A fundamental issue is the proper selection of coordinate systems and metric tensors in these configurations when such configurations are classified as anholonomic. The particular choice of a global, external Cartesian coordinate system and corresponding covariant identity tensor as a metric on an intermediate configuration space is shown to be a constitutive assumption often made regardless of the existence of geometrically necessary crystal defects associated with the anholonomicity (i.e., the non-Euclidean nature) of the space. Since the metric tensor on the anholonomic configuration emerges necessarily in the definitions of scalar products, certain transpose maps, tensorial symmetry operations, and Jacobian invariants, its selection should not be trivialized. Several alternative (i.e., non-Euclidean) representations proposed in the literature for the metric tensor on anholonomic spaces are critically examined.