Dialdehyde starch‐crosslinked chitosan films and their antimicrobial effects

For improved mechanical and water‐swelling properties of chitosan films, a series of transparent films were prepared with dialdehyde starch as a crosslinking agent. Fourier transform infrared and X‐ray analysis results demonstrated that the formation of Schiff's base disturbed the crystallization of chitosan. The mechanical properties and water‐swelling properties of the films were significantly improved. The best values of the tensile strength and breaking elongation were 113.1 MPa and 27.0%, respectively, when the dialdehyde starch content was 5%. All the crosslinked films still retained obvious antimicrobial effects toward S. aureus and E. coli, and they showed potential for biomedical applications. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 993–997, 2003     

Broadband spectral shaping in a Ti:sapphire regenerative amplifier

A birefringent crystal quartz plate of known thickness has been used as a spectral filter for spectral shaping in a Ti:sapphire regenerative amplifier. The spectral profile of the amplified pulse ejected from the regenerative amplifier was observed while adjusting the birefringent crystal plate in the cavity. By altering the gain spectrum, the bandwidth of the regeneratively amplified pulse was increased from 18 to 35 nm by using a 0.34-mm thick birefringent plate. The output pulse spectrum from the regenerative amplifier neared the bandwidth of the seed pulse. As a comparison, we used a coated filter outside the regenerative amplifier cavity, and the bandwidth of the regeneratively amplified pulse was stretched to 28 nm. When the bandwidth was stretched to 35 nm, the pulse was compressed to 35 fs.     

Preparation,thermal properties,and flame retardance of epoxy–silica hybrid resins

A novel epoxy system was developed through the in situ curing of bisphenol A type epoxy and 4,4′‐diaminodiphenylmethane with the sol–gel reaction of a phosphorus‐containing trimethoxysilane (DOPO–GPTMS), which was prepared from the reaction of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) with 3‐glycidoxypropyltrimethoxysilane (GPTMS). The preparation of DOPO–GPTMS was confirmed with Fourier transform infrared, ¹H and ³¹P NMR, and elemental analysis. The resulting organic–inorganic hybrid epoxy resins exhibited a high glass‐transition temperature (167 °C), good thermal stability over 320 °C, and a high limited oxygen index of 28.5. The synergism of phosphorus and silicon on flame retardance was observed. Moreover, the kinetics of the thermal oxidative degradation of the hybrid epoxy resins were studied. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2354–2367, 2003     

超短强激光脉冲在等离子体隧道中传输的理论与数值模拟研究

研究了超短强激光脉冲在非扰动抛物型部分电离的预等离子体隧道中的传输特性.从Maxwell方程出发得到了两个包含衍射、三阶强度非线性、等离子体散焦、等离子体隧道聚焦以及相对论自聚焦等效应在内的激光场演化方程，即折射率方程和哈密顿-雅可比方程.在此基础 上得到了激光在等离子体隧道中传输的包络方程以及光斑半径与传输距离、隧道宽度等初始 参量的关系. 关键词： 等离子体隧道聚焦 相对论自聚焦 势阱     

The millimeter wave spectrum of the CO dimer

The millimeter wave spectrum of the isotopically substituted CO dimer, (¹³C¹⁶O)₂, has been studied for the first time, confirming and extending a recent infrared study. Eighty-seven transitions in the 77-180 GHz region have been assigned and analyzed in terms of a model-independent term value scheme involving 57 rotational levels with J=0-8. The levels can be classified into 7 “stacks” which have symmetry classifications of either A⁻/B⁺ or A⁺/B⁻ and K-values of either 0 or 1. For the normal isotope, symmetry and nuclear spin statistics cause alternate rotational levels to be missing, but for (¹³C¹⁶O)₂ all levels are present with an intensity alternation of 1:3 between A and B symmetries. The four A⁻/B⁺ stacks have not previously been observed, and the lowest of them establishes the tunneling splitting of (¹³C¹⁶O)₂ to be 3.769 cm⁻¹, slightly larger than the (¹²C¹⁶O)₂ value of 3.731 cm⁻¹. A large amount of precise experimental data is now available for the CO dimer, which should lead to greater theoretical insight into its structure and tunneling dynamics.     

光电变色器件用纳米晶氧化钛薄膜的微结构与特性

纳米晶TiO2薄膜在光电变色器件中具有很重要的作用。它的微结构直接影响染料的吸附、光的散射以及电荷输运的特性。因此，探索TiO2薄膜的微结构(如粒径、表面形貌和厚度等)及光电性能是非常有意义的。采用电子束蒸发工艺制备了光电变色器件用纳晶TiO2薄膜，利用原子力显微镜、X射线衍射、俄歇电子能谱等手段对纳米晶TiO2薄膜的表面形貌、结晶状态及组分进行了分析。从理论上研究和讨论了纳米晶TiO2薄膜晶粒尺寸对光电性能的影响，并用量子限制效应解释了吸收光谱峰值波长随粒径减小而发生蓝移的现象。     

Synthesis of some chiral liquid crystals and study of the effect of intramolecular hydrogen bonding on the phase behaviour

The synthesis of three new series of chiral Schiff's bases containing benzilideneaniline and 2-hydroxybenzilideneaniline moieties as mesogenic cores is presented. Differential scanning calorimetry, optical polarizing microscopy and X-ray diffraction measurements were used to study the phase transition temperatures and behaviour. The results reveal that most of these materials show chiral smectic mesomorphism.     

三甲基膦和环氧乙烷的加成产物裂解反应机理的MNDO法研究

文中用ＭＮＤＯ方法研究了三甲基膦和环氧乙烷加成产物裂解反应机理     

NOTE ON THE OSCILLATION OF THE SOLUTION FOR GENERALIZED LIENARD EQUATIONS

Ｃｏｎｓｉｄｅｒｉｎｇｓｙｓｔｅｍ：ｘ＝φ（ｙ）－Ｆ（ｘ），ｙ＝－ｇ（ｘ）｛（Ｅ）ｉｎｗｈｉｃｈＦ（ｘ）＝∫ｘ０ｆ（ｔ）ｄｔ，ｆ（ｘ），ｇ（ｘ），φ（ｙ）ａｒｅｃｏｎｔｉｎｕｏｕｓ，ａｎｄｓａｔｉｓｆｙｔｈｅｃｏｎｄｉｔｉｏｎｓｗｈｉｃｈｅｎｓｕｒ...     

SINGLE MACHINE SCHEDULING WITH CONTROLLABLE PROCESSING TIMES AND COMPRESSION COSTS （PART I：EQUAL TIMES AND COSTS）

Most papers in scheduling research have treated individual job processing times as fixed parameters. However, in many practical situations, a manager may control processing time by realloeating resources. In this paper, authors consider a machine scheduling problemwith controllable processing times. In the first part of this paper, a special case where the pro-cessing times and compression costs are uniform among jobs is discussed. Theoretical results are derived that aid in developing an O（n^2) algorithm to slove the problem optimally. In the second part of this paper, authors generalize the discussion to general case, An effective heuristic to the genera/ problem will be presented.