Pseudo-MS3 in a MALDI orthogonal quadrupole-time of flight mass spectrometer

Both the matrix selected and the laser fluence play important roles in MALDI-quadrupole/time of flight (QqTOF) fragmentation processes. "Hot" matrices, such as alpha-cyano4-hydroxycinnamic acid (HCCA), can increase fragmentation in MS spectra. Higher laser fluence also increases fragmentation. Typical peptide fragment ions observed in the QqTOF are a, b, and y ion series, which resemble low-energy CID product ions. This fragmentation may occur in the high-pressure region before the first mass-analyzing quadrupole. Fragment ions can be selected by the first quadrupole (Q1), and further sequenced by conventional MS/MS. This allows pseudo-MS3 experiments to be performed. For peptides of higher molecular weight, pseudo-MS3 can extend the mass range beyond what is usually accessible for sequencing, by allowing one to sequence a fragment ion of lower molecular weight instead of the full-length peptide. Peptides that predominantly show a single product ion after MS/MS yield improved sequence information when this technique is applied. This method was applied to the analysis of an in vitro phosphorylated peptide, where the intact enzymatically-generated peptide showed poor dissociation via MS/MS. Sequencing a fragment ion from the phosphopeptide enabled the phosphorylation site to be unambiguously determined.     

Methods for research on immune complement activation on modified sensor surfaces

We have developed a methodological system consisting of a new surface sensitive quartz crystal microbalance with dissipation monitoring (QCM-D) sensor surfaces together with different surface modification methods for the investigation of surface associated complement activation in human sera. The QCM-D surface, 10 mm in diameter, was modified by spin-coating of poly(urethane urea) (PUUR) and polystyrene (PS). Some sensor surfaces were also sputtered with titanium (Ti) or modified by hydrophobic self-assembled monolayer (SAM) of an 18-carbon alkane thiol with a ---CH₃ end group. The amount of surface deposited complement protein was investigated by incubation of the modified sensor surfaces in human sera, followed by incubation with antibodies directed against complement factor 3c (C3c). The amounts of bound anti-C3c were then used as an arbitrary measure of surface induced complement activation. The order of complement activation of the different surfaces, as judged by three separate measurements per surface modification, was PUUR>PS=SAM>Ti. The Ti surface had a similar low degree of anti-C3c binding as the negative controls (heat inactivated sera). The novel QCM-D methodology was found to be very simple, accurate, sensitive and well suited as a screening method for complement activation and protein adsorption on different materials. We also compared the sensitivity of QCM-D method with surface plasmon resonance (SPR) for the quantification of protein adsorption and complement activation on gold sensor surfaces. The QCM-D method was equally sensitive as the SPR for the detection of protein adsorption from a solution independently if low flow rate (5 μl/min) was used. A slight increase in sensitivity was found at higher flow rate (30 μl/min). However, we found it difficult to use the SPR method on the Ti, PS and PUUR surfaces due to decreased light penetration of the modified SPR sensor chip.     

Ultraviolet B Wavelength Dependence for the Regulation of Two Major Matrix-Metalloproteinases and Their Inhibitor TIMP-1 in Human Dermal Fibroblasts

Abstract— The wavelength dependence for the regulation of two major matrix-metalloproteinases, interstitial collagenase (MMP-1) and stromelysin-1 (MMP-3), and their major inhibitor, tissue inhibitor of metalloproteinases (TIMP-1), was studied in human dermal fibroblasts in vitro. Monochromatic irradiation at 302, 307, 312 and 317 nm with intensities ranging from 20 to 300 J/m² increased MMP-1 and MMP-3 mRNA steady-state levels and the secretion of the corresponding proteins up to 4.4-fold, whereas almost no increase was observed at wavelengths <290 nm. In contrast, the synthesis of TIMP-1 increased only marginally. This unbalance may contribute to the severe connective tissue damage related to photoaging of the skin. The wavelengths responsible for MMP-1 and MMP-3 induction reported here are distinct from the absorption spectrum of DNA and are different from results previously reported in the literature. Importantly, they overlap with wavelengths whose intensity is predicted to increase on the earth's surface upon ozone depletion. Intensities and particular wavelengths used in our studies in vitro can be absorbed readily by fibroblasts within the skin in vivo and, thus, are relevant for risk assessment and development of protective agents.     

Pro-domain removal in ASP-2 and the cleavage of the amyloid precursor are influenced by pH

Background

One of the signatures of Alzheimer's disease is the accumulation of aggregated amyloid protein, Aβ, in the brain. Aβ arises from cleavage of the Amyloid Precursor protein by β and γ secretases, which present attractive candidates for therapeutic targeting. Two β-secretase candidates, ASP-1 and ASP-2, were identified as aspartic proteases, both of which cleave the amyloid precursor at the β-site. These are produced as immature transmembrane proteins containing a pro-segment.

Results

ASP-2 expressed in HEK293-cells cleaved the Swedish mutant amyloid precursor at different β-sites at different pHs in vitro. Recent reports show that furin cleaves the pro-peptide of ASP-2, whereas ASP-1 undergoes auto-catalysis. We show that purified recombinant ASP-2 cleaves its own pro-peptide at ph 5 but not pH 8.5 as seen by mass spectrometry, electrophoresis and N-terminal sequencing.

Conclusion

We suggest that ASP-2 processing as well as activity are influenced by pH, and hence the cellular localisation of the protein may have profound effects on the production of Aβ. These factors should be taken into consideration in the design of potential inhibitors for these enzymes.     

Spektrochemische Bestimmung von Spurenelementen in Eisen und Stahl

Zusammenfassung Ein zweites spektrochemisches Verfahren zur Bestimmung von Silber, Blei, Zinn, Wismut, Tellur, Arsen und Antimon in Eisen und Stahl wurde entwickelt. Auch hier wird die spektrographische Analyse nach Auflösen der Probe in Salpetersäure und Eindampfen der Lösung zur Trockne durchgeführt. Die leichtflüchtigen Elemente werden ohne Puffer durch Anwendung eines inhomogenen Magnetfeldes und einer zweckmäßigen Elektrodenform störungsfrei und mit guter Reproduzierbarkeit bestimmt. Dabei sind die unteren Bestünmungsgrenzen gleich oder niedriger als die anderer spektrochemischer Methoden, die bisher beschrieben wurden. Das Verfahren zeichnet sich durch Schnelligkeit und Einfachheit aus.

---

Spectrochemical determination of trace elements in iron and steelPart II. determination of Ag, Pb, Sn, Bi, Te, As and Sb by using an inhomogeneous magnetic field

A second spectrochemical method for the determination of silver, lead, tin, bismuth, tellurium, arsenic and antimony in iron and steel has been developed. Here also the spectrographic analysis is to be carried out after dissolution of the sample in nitric acid and evaporation of the solution to dryness. Without buffer, the easily volatile elements are determined free of interferences and with good reproducibility by using an inhomogeneous magnetic field and electrodes of an appropriate form. The lower limits of determination are the same or lower than those obtained by any other spectrochemical method described. The method is characterised by rapidity and simplicity of procedure.

---

---

Teil I: diese Z. 254, 16 (1971).     

Spectroscopic and photophysical properties of hexanuclear rhenium(III) chalcogenide clusters

The electronic, vibrational, and excited-state properties of hexanuclear rhenium(III) chalcogenide clusters based on the [Re(6)(mu(3)-Q)(8)](2+) (Q = S, Se) core have been investigated by spectroscopic and theoretical methods. Ultraviolet or visible excitation of [Re(6)Q(8)](2+) clusters produces luminescence with ranges in maxima of 12 500-15 100 cm(-)(1), emission quantum yields of 1-24%, and emission lifetimes of 2.6-22.4 microseconds. Nonradiative decay rate constants and the luminescence maxima follow the trend predicted by the energy gap law (EGL). Examination of 24 clusters in solution and 14 in the solid phase establish that exocluster ligands engender the observed EGL behavior; clusters with oxygen- or nitrogen-based apical ligands achieve maximal quantum yields and the longest lifetimes. The excited-state decay mechanism was investigated by applying nonradiative decay models to temperature-dependent emission experiments. Solid-state Raman spectra were recorded to identify vibrational contributions to excited-state deactivation; spectral assignments were enabled by normal coordinate analysis afforded from Hartree-Fock and DFT calculations. Excited-state decay is interpreted with a model where normal modes largely centered on the [Re(6)Q(8)](2+) core induce nonradiative relaxation. Hartree-Fock and DFT calculations of the electronic structure of the hexarhenium family of compounds support such a model. These experimental and theoretical studies of [Re(6)Q(8)](2+) luminescence provide a framework for elaborating a variety of luminescence-based applications of the largest series of isoelectronic clusters yet discovered.     

The symmetry energy γ parameter of relativistic mean-field models

The relativistic mean-field models tested in previous works against nuclear matter experimental values,critical parameters and macroscopic stellar properties are revisited and used in the evaluation of the symmetry energyγ parameter obtained in three different ways. We have checked that, independent of the choice made to calculate theγ values, a trend of linear correlation is observed between γ and the symmetry energy(S_0) and a more clear linear relationship is established between γ and the slope of the symmetry energy(L_0). These results directly contribute to the arising of other linear correlations between γ and the neutron star radii of R_(1.0) and R_(1.4), in agreement with recent findings. Finally, we have found that short-range correlations induce two specific parametrizations, namely,IU-FSU and DD-MEδ, simultaneously compatible with the neutron star mass constraint of 1.93≤M_(max)/M_☉≤2.05 and with the overlap band for the L_0 ×S_0 region, to present γ in the range of γ=0.25±0.05.