Study of the carbonyl products of terpene/OH radical reactions: detection of the 2,4-DNPH derivatives by HPLC-MS

The oxidation of the terpenes - and -pinene, limonene and ³-carene by hydroxyl radicals has been investigated in a fast-flow reactor coupled to a liquid nitrogen trap for collecting the carbonyl compounds. Identification of the products was performed via 2,4-dinitrophenylhydrazone (DNPH) derivatization of the carbonyls to form the mono- and di-DNPH derivatives, which were analysed by high-performance liquid chromatographic (HPLC)-DAD (diode array detector) and HPLC-mass spectrometry (HPLC-MS). Both electrospray ionization [ESI(–)] and atmospheric pressure chemical ionization [APCI(–)] were suitable for the detection of the DNPH derivatives of formaldehyde, acetaldehyde, myrtanal, campholene aldehyde, perillaldehyde, acetone, nopinone, trans-4-hydroxynopinone and 4-acetyl-1-methylcyclohexene. Also the mono-DNPH derivatives of the dicarbonyl compounds pinonaldehyde, endolim and caronaldehyde could be identified. The MS² spectra generated in the ion trap of the mass spectrometer allowed us to distinguish between aldehydes and ketones on the basis of the characteristic fragment ion m/z 163 for the aldehydes. For the quantitative analysis of the mono-DNPH derivatives, ESI(–) in combination with single ion monitoring (SIM) detection showed the lowest detection limits. For the quantification of the dicarbonyl compounds, the acid-sensitive di-DNPH derivatives had to be formed by keeping the acidity in the acid-catalysed derivatization reaction at about 1.7 mM H₂SO₄. Detection of these dicarbonyl compounds can only be performed by APCI(–) with somewhat lesser sensitivity than by HPLC-DAD.     

Dipolar and nonpolar altitudinal molecular rotors mounted on an Au(111) surface

We describe the preparation of a compound whose molecules consist of two metal sandwich stands carrying tentacles with affinity to metal surfaces and holding an axle that carries a dipolar or a nonpolar rotator. The dipolar rotor exists as three pairs of enantiomers, rapidly interconverting at room temperature. When mounted on a gold surface, each molecule represents a chiral altitudinal rotor, with the rotator axle parallel to the surface. The surface-mounted rotor molecules are characterized by several spectroscopic and imaging techniques. At any one time, in about one-third of the dipolar rotors the rotator is free to turn and the direction of its dipole can be flipped by the electric field applied by an STM tip, as revealed by differential barrier height imaging. Molecular dynamics calculations suggest that electric field normal to the surface causes members of one pair of enantiomers to rotate unidirectionally.     

Assay development and high-throughput screening of caspases in microfluidic format

Caspase proteases are familiar targets in drug discovery. A common format for screening to identify caspase inhibitors employs fluorogenic or colorimetric tetra-peptide substrates in 96, 384, or 1536 -well microtiter plates. The primary motivation for increasing the number of wells per plate is to reduce the reagent cost per test and increase the throughput of HTS operations. There are significant challenges, however, to moving into or beyond the 1536-well format, such as submicroliter liquid handling, liquid evaporation, increased surface area-to-volume ratios, and the potential for artifacts and interference from small air-borne particles such as lint. Therefore, HTS scientists remain keenly interested in technologies that offer alternatives to the ever-shrinking microtiter plate well. Microfluidic assay technology represents an attractive option that, in theory, consumes only subnanoliter volumes of reagents per test. We have successfully employed a microfluidic assay technology in fluorogenic screening assays for several caspase isoforms utilizing the Caliper Technologies Labchip platform. Caspase-3 is used as a representative case to describe microfluidic assay development and initial high-throughput screening results. In addition, microfluidic screening and plate-based screening are compared in terms of reagent consumption, data quality, and ease of operation.     

Incorporation of a flexible, pyridine-functionalized Diaza-crown ether into discrete supramolecules via coordination-driven self-assembly

A flexible, pyridine-functionalized diaza-crown ether was self-assembled into discrete supramolecules of differing stoichiometries upon combination with various organoplatinum molecules. They are characterized by electrospray ionization mass spectrometry and (31)P[(1)H] and (1)H NMR. In one case, (1)H-(1)H NOE enhancements of a [1 + 1] assembled structure demonstrate the puckered shape of the macrocyclic ring. Despite its inherent flexibility, the dipyridyl-substituted 18-membered diaza-crown ligand prefers to self-assemble into closed systems when reacted with platinum-containing acceptors.     

SPECTRAL PERTURBATIONS OF THE AEQUOREA GREEN-FLUORESCENT PROTEIN

Abstract— In the jellyfish Aequorea, the green-fluorescent protein (GFP) functions as the in vivo bio-luminescence emitter via energy transfer from the photoprotein aequorin. Accumulated evidence has indicated that the Aequorea GFP is a relatively inflexible protein. Present evidence, however, indicates that the chromophore environment is readily accessible to a variety of external perturbants. Native Aequorea GFP has an absorbance maximum at 395 nm and a shoulder at 470 nm. In low ionic strength buffer at neutral pH and room temperature the 395/470 nm absorbance ratio is about 2.0. We show that this ratio is highly variable depending upon temperature, ionic strength, protein concentration, and pH. A maximum ratio of 6.5 (at a protein concentration of 18.6 mg/m/) and minimum of 0.42 (at a pH of 12.2) have been measured. In the latter case, the resulting absorption and excitation spectra resemble those of Renilla GFP in spectral shape (but not wavelength maximum). In all cases as the perturbant is varied the resulting spectra pass through a sharp isosbestic point, suggesting a relatively simple two-state mechanism. These spectral perturbations are fully reversible. On the basis of these results, we suggest that the chromophore binding site is conformationally flexible. pH-Dependent changes in the near-UV and visible circular dichroism spectra plus spectrophotometric titration of tyrosine residues lend additional support to this hypothesis.     

Evidence for thermal decomposition contributions to the mass spectra of chlorinated phenoxyacid herbicides obtained by particle beam liquid chromatography mass spectrometry

The spectral quality of a group of chlorinated phenoxyacid herbicides has been shown to degrade under certain conditions upon introduction into the mass spectrometer by a particle beam interface. Experiments were performed to investigate these changes in spectra. Normalized ion chromatograms were generated for the herbicides, and the results showed a broadening of the profiles of some ions, indicating a longer residence time in the ion source. These ions were postulated as coming from the ionization of thermal degradation products from the herbicides. The generation of these ions was dependent on ion source temperature, analyte concentration, and, by implication, ion source cleanliness. Tandem mass spectrometry experiments were performed on these ions from the herbicides and ions from the corresonding phenols. The tandem mass spectra of the ions from the herbicides were similar to the tandem mass spectra of the ions from the phenols. Therefore, it appears that the particle beam mass spectra of the chlorinated phenoxyacid herbicides are composite spectra with contributions from the gas phase ionization of the parent herbidides and thermal decomposition products.     

Intra- and intermolecular Fe-catalyzed dicarbofunctionalization of vinyl cyclopropanes

Design and implementation of the first (asymmetric) Fe-catalyzed intra- and intermolecular difunctionalization of vinyl cyclopropanes (VCPs) with alkyl halides and aryl Grignard reagents has been realized via a mechanistically driven approach. Mechanistic studies support the diffusion of alkyl radical intermediates out of the solvent cage to participate in an intra- or intermolecular radical cascade with a range of VCPs followed by re-entering the Fe radical cross-coupling cycle to undergo (stereo)selective C(sp²)–C(sp³) bond formation. This work provides a proof-of-concept of the use of vinyl cyclopropanes as synthetically useful 1,5-synthons in Fe-catalyzed conjunctive cross-couplings with alkyl halides and aryl/vinyl Grignard reagents. Overall, we provide new design principles for Fe-mediated radical processes and underscore the potential of using combined computations and experiments to accelerate the development of challenging transformations.

Design and implementation of the first (asymmetric) Fe-catalyzed intra- and intermolecular difunctionalization of vinyl cyclopropanes (VCPs) with alkyl halides and aryl Grignard reagents has been realized via a mechanistically driven approach.     

Facile Phenylphosphinidene Transfer Reactions from Carbene–Phosphinidene Zinc Complexes

Phosphinidenes [R-P] are convenient P₁ building blocks for the synthesis of a plethora of organophosphorus compounds. Thus far, transition-metal-complexed phosphinidenes have been used for their singlet ground-state reactivity to promote selective addition and insertion reactions. One disadvantage of this approach is that after transfer of the P₁ moiety to the substrate, a challenging demetallation step is required to provide the free phosphine. We report a simple method that enables the Lewis acid promoted transfer of phenylphosphinidene, [PhP], from NHC=PPh adducts (NHC=N-heterocyclic carbene) to various substrates to produce directly uncoordinated phosphorus heterocycles that are difficult to obtain otherwise.     

Unsupervised cell identification on multidimensional X‐ray fluorescence datasets

A novel approach to locate, identify and refine positions and whole areas of cell structures based on elemental contents measured by X‐ray fluorescence microscopy is introduced. It is shown that, by initializing with only a handful of prototypical cell regions, this approach can obtain consistent identification of whole cells, even when cells are overlapping, without training by explicit annotation. It is robust both to different measurements on the same sample and to different initializations. This effort provides a versatile framework to identify targeted cellular structures from datasets too complex for manual analysis, like most X‐ray fluorescence microscopy data. Possible future extensions are also discussed.