Reaction of Mercaptoacetate and Halides Containing Activated Methylenes with Thiocarbamoylimidates: A Novel Approach to the Synthesis of Aminothiazole Derivatives

The reaction of N-thiocarbamoylimidates 1 with methyl thioglycolate leads to the formation of 4-arylamino-5-methoxycarbonylthiazoles 2. The condensation of the same imidates 1 on ethyl bromoacetate, benzyl bromide and chloroacetonitrile provides the corresponding 2-arylaminothiazoles 4.      

Simulation and Experimental Study for Degradation of Organic Dyes Using Dual pin‐to‐plate Corona Discharge Plasma reactors for Industrial Wastewater Treatment

This work researches the possibility of increasing the dye removal efficiency from wastewater using nonthermal plasma. A study for the optimal air gap distance between dual pin and surface of Acid Blue 25 dye solution and thickness of ground plate is carried out using 3D‐EM simulator to find maximum electric field intensity at the tip of both pins. The consequences display that the best gap for corona discharge is approximately 5 mm using 15 kV source. In addition, the optimum plate thickness is 0.1 mm. These distance and thickness were mentioned are constant during the study of other factors. Dual pin‐to‐plate high‐voltage corona discharge plasma system is presented to investigation experimentally the gap distance, thickness of ground plate, initial dye concentration, pH solution and conductivity on the amount of Acid Blue 25 dye color removal efficiency from wastewater. There is a large consensus among the simulation and experimental work in the air gap and thickness of ground plate. Where the decolorization for air gap 5 mm is 95.74 at time 35 min compared with 91% and 17% for 1 mm and 20 mm gap distance respectively. Also, the discharge energy at each air gap are calculated. Measurement results for the impact of thickness of an Aluminum ground plate on color removal competence showed color removal efficiencies of 86.3%, 90.78% and 98.06%, after treatment time 15 min for thicknesses of 2, 0.5 and 0.1 mm respectively. The decolorization behavior utilizing dual pin‐to‐plate corona discharge plasma system display 82% pigment evacuation proficiency inside 11min. The complete decolorization was accomplished within 28min for distinctive examined introductory color focuses 5 ppm up to 100 ppm. Likewise, the impacts of conductivity by utilizing diverse salts as AlCl3, CaCl2, KCl and NaCl and with distinctive focuses have been explored. The rising of the solution conductivity leads to the reduction of decolorization efficiency. The decolorization efficiency and discharge energy are calculated at different concentration molarity for AlCl3, CaCl2, KCl and NaCl. It was observed that the presence of salts at the same concentration level substantially decreased the rate and the extent of decolorization. The results indicate that the optimum pH for the decolorization of Acid Blue 25 dye is in the range between 3 and 6. Furthermore the conductivity and discharge energy were measurement at each value of pH. Energy yield for decolorization and Electrical Energy per Order (EE/O) under different initial pH value were calculated. A kinetic model is used to define the performance of corona discharge system under different value of pH. The model of pseudo ‐zero, pseudo‐first order, and pseudo‐second order reactions kinetic are utilized to investigate the decolorization of Acid Blue 25 dye. The rate of degradation of Acid Blue 25 dye follows the pseudo‐first order kinetics in the dye concentration. Energy consumption requirements for decolorization was considered. The outcomes will be useful for designing the plasma treatment systems suitable for industrial wastewaters. (© 2016 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Synthesis and Insecticidal Efficacy of Novel Bis Quinazolinone Derivatives

A novel bis benzoxazin‐4‐one derivative has been synthesized and utilized to construct a new series of bis quinazolin‐4(3H)‐one derivatives via the reactions with different nitrogen nucleophiles namely, primary amines (ammonia, ethanolamine, and 4‐aminoantipyrine), secondary amines (morpholine and piperidine), diamine (o‐phenylenediamine), hydrazine hydrate, and hydroxylamine. The insecticidal efficacy of newly synthesized compounds was also studied. The structural features of the synthesized compounds were assigned by spectral analysis.     

Sustainable Development of Chitosan/Calotropis procera-Based Hydrogels to Stimulate Formation of Granulation Tissue and Angiogenesis in Wound Healing Applications

The formation of new scaffolds to enhance healing magnitude is necessarily required in biomedical applications. Granulation tissue formation is a crucial stage of wound healing in which granulation tissue grows on the surface of a wound by the formation of connective tissue and blood vessels. In the present study, porous hydrogels were synthesized using chitosan incorporating latex of the Calotropis procera plant by using a freeze–thaw cycle to stimulate the formation of granulation tissue and angiogenesis in wound healing applications. Structural analysis through Fourier transform infrared (FTIR) spectroscopy confirmed the interaction between chitosan and Calotropis procera. Latex extract containing hydrogel showed slightly higher absorption than the control during water absorption analysis. Thermogravimetric analysis showed high thermal stability of the 60:40 combination of chitosan (CS) and Calotropis procera as compared to all other treatments and controls. A fabricated scaffold application on a chick chorioallantoic membrane (CAM) showed that all hydrogels containing latex extract resulted in a significant formation of blood vessels and regeneration of cells. Overall, the formation of connective tissues and blood capillaries and healing magnitude decreased in ascending order of concentration of extract.     

Chemical functionalization of polyethylene surfaces by plasma-assisted carbene insertion

Controlled surface modification of PE is achieved by an efficient and facile approach via plasma-assisted carbene insertion generated using diazo chemistry. The combination of plasma and carbene insertion shows a synergistic effect, which leads to an obvious enhancement of surface grafting, as shown qualitatively by a combination of IR and UV reflectance spectroscopy, and XPS analysis. The chemical modification may be observed spectroscopically, and the approach provides an opportunity for the convenient modification of low surface energy materials.     

Scope and mechanistic studies of electrophilic alkoxyetherification

A one-pot electrophilic alkoxyetherification using an olefin, a cyclic ether, a carboxylic acid, and N-bromosuccinimide has been developed. The oxygen nucleophiles, the olefinic substrates, and the cyclic ether partners can be varied to produce a wide range of alkoxyether derivatives.     

H2O + Fe(NO3)3 + Ni(NO3)2 ternary system isotherms at 0 °C and 30 °C

H₂O + Ni(NO₃)₂ binary system were investigated in the temperature range from −25 °C to 55 °C. The solid-liquid equilibria of the ternary system H₂O + Fe(NO₃)₃ + Ni(NO₃)₂ were studied using a synthetic method based on conductivity measurements. Tow isotherms were established at 0 °C and 30 °C, and the appearing stable solid phases are iron nitrate nonahydrate (Fe(NO₃)₃·9H₂O), iron nitrate hexahydrate (Fe(NO₃)₃·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O) and nickel nitrate tetrahydrate (Ni(NO₃)₂·4H₂O).     

Preparation,Characterization, Biological Activity and 3D Molecular Modeling of Mn(II), Co(II), Ni(II), Cu(II), Pd(II) and Ru(III) Complexes of Some Sulfadrug Schiff Bases

Mn(II), Co(II), Ni(II), Cu(II), Pd(II) and Ru(III) complexes of Schiff bases derived from the condensation of sulfaguanidine with 2,4‐dihydroxy benzaldehyde ( HL1 ), 2‐hydroxy‐1‐naphthaldehyde ( HL2 ) and salicylaldehyde ( HL3 ) have been synthesized. The structures of the prepared metal complexes were proposed based on elemental analysis, molar conductance, thermal analysis (TGA, DSC and DTG), magnetic susceptibility measurements and spectroscopic techniques (IR, UV‐Vis, and ESR). In all complexes, the ligand bonds to the metal ion through the azomethine nitrogen and α‐hydroxy oxygen atoms. The structures of Pd(II) complex 8 and Ru(III) complex 9 were found to be polynuclear. Two kinds of stereochemical geometries; distorted tetrahedral and distorted square pyramidal, have been realized for the Cu(II) complexes based on the results of UV‐Vis, magnetic susceptibility and ESR spectra whereas octahedral geometry was predicted for Co(II), Mn(II) and Ru(III) complexes. Ni(II) complexes were predicted to be square planar and tetrahedral and Pd(II) complexes were found to be square planar. The antimicrobial activity of the ligands and their metal complexes was also investigated against the gram‐positive bacteria Staphylococcus aures and Bacillus subtilis and gram‐negative bacteria, Escherichia coli and Pesudomonas aeruginosa, by using the agar dilution method. Chloramphenicol was used as standard compound. The obtained data revealed that the metal complexes are more or less, active than the parent ligand and standard. The X‐ray crystal structure of HL3 has been also reported.     

Quantum Monte Carlo study of the CO interaction with a dimer model surface for Cr(110)

The chemisorption of CO on a Cr (110) surface is investigated using the quantum Monte Carlo method in the diffusion Monte Carlo (DMC) variant and a model Cr₂CO cluster. The present results are consistent with the earlier ab initio HF study with this model that showed the tilted/near-parallel orientation as energetically favoured over the perpendicular arrangement. The DMC energy difference between the two orientations is larger (1.9 eV) than that computed in the previous study. The distribution and reorganization of electrons during CO adsorption on the model surface are analysed using the topological electron localization function method that yields electron populations, charge transfer and clear insight on the chemical bonding that occurs with CO adsorption and dissociation on the model surface.