Benzene-assisted atmospheric-pressure chemical ionization: a new liquid chromatography/mass spectrometry approach to the analysis of selected hydrophobic compounds

Charge-exchange reactions involving benzene have been successfully exploited to increase the sensitivity of atmospheric-pressure chemical ionization mass spectrometry (APCI-MS) towards hydrophobic compounds of significant environmental relevance which are not detectable with the ordinary APCI techniques. Among them, good sensitivity have been found for (a) highly chlorinated biphenyl derivatives such as dichlorodiphenyltrichloroethane (DDT), dichlorodiphenyldichloroethane (DDD) and dichlorodiphenyldichloroethene (DDE); (b) cyclopentadienes such as Aldrin and its epoxy derivatives Dieldrin and Endrin; and (c) dibenzofurans and dibenzo-para-dioxins such as 2,3,7,8-tetrachlorodibenzofuran (2,3,7,8-TCDF) and 2,3,7,8-tetrachloro-dibenzo-para-dioxin (2,3,7,8-TCDD). The reactant benzene molecules were introduced into the source either through the nebulizer gas or by direct post-column addition of neat liquid, whereas the targeted compounds were analyzed using a high-performance liquid chromatography (HPLC) RP-18 column using methanol/water solutions as mobile phase. By using benzene as post-column reagent, positive ion mode detection was proven to be significantly enhanced as compared with APCI measurements carried out without benzene assistance.     

Harmonic oscillator tensors in contact transformation theory

The application of contact transformation theory to the perturbed harmonic oscillator is reexamined in the light of the harmonic oscillator tensors previously presented. It is found that the recasting of the formalism of this problem in terms of harmonic oscillator tensors results in great simplifications, most of which stem from the introduction of the additional algebraic quantum numbers (l, m). The order of magnitude of each fragment of the Hamiltonian is easily recognizable, and the diagonal and nondiagonal parts contained therein are readily identifiable. The determination of the contact transformation operator is reduced to a simple formula. First, an analysis is made for a single mode of vibration, and it is subsequently extended to a multimode case. The perturbed diatomic vibrator is presented as an example.     

XAS investigation of tantalum and niobium in nanostructured TiO2 anatase

Sol-gel routes were used to prepare Ta 10 at% and Nb 5 at% and 10 at% doped titania nanosized powders. When fired between 410°C and 850°C the doped titania powders are in the anatase phase; further heating up to 1050°C is required to obtain the rutile phase. The presence of dopant atoms delays the rate of transformation as compared with pure titania powders. Doping also affects the rate of grain growth and increases the conductance response to gas. To better understand the role played by dopant atoms in inhibiting both phase transformation to rutile and grain growth, X-ray Absorption Spectroscopy measurements were performed at the L_III-L_I absorption edges of Ta and Nb K absorption edge. Analysis was restricted to the anatase phase because the transformation to rutile phase, obtained by firing at 1050°C, is accompanied by the formation of undesired Ta and Nb oxides (Ta₂O₅ and Nb₂TiO₇, respectively). Extended X-ray Absorption Fine Structure and X-ray Absorption Near-Edge Spectroscopy analysis results indicate that in nanostructured anatase both tantalum and niobium atoms substitute Ti cations with +5 valence state.     

Identification and mass spectrometric characterization of glycosylated flavonoids in Triticum durum plants by high-performance liquid chromatography with tandem mass spectrometry

A mass spectrometric method for extensive detection and semi-quantitative determination of flavonoid glycosides in stem and leaves of young Triticum durum plants is presented. About 100 g of sample were lyophilized and ground, and the compounds of interest were then extracted, cleaned-up, and fractionated using high-performance liquid chromatography (HPLC). Tandem mass spectrometry analyses were performed using a quadrupole-linear ion trap instrument with an information-dependent data acquisition (IDA) protocol that looped two experiments, enhanced MS scan and enhanced product ion scan. Various glycoconjugates, which are all derivatives of only four flavones, apigenin, luteolin, chrysoeriol and tricin, were identified and belong to the following categories: 7 monoglycosides, 31 diglycosides, 15 triglycosides and 1 tetraglycoside. Among these some acylated glycosides were found. Tricin derivatives are present exclusively as O-glycosides, while apigenin and luteolin are present always as C-glycosides. Semi-quantitative estimation was performed by using the monoglycoside and diglycoside of quercetin as internal standards.     

Studies on nitroenamines. Part III. Synthesis and spectral properties of 4-Acyl-1-arylimidazoles

The catalytic (C/Pd) hydrogenation of 3-arylamino-2-nitro-2-enones ( 1 ) in the presence of carboxylic ortho esters ( 2 ) affords 4-acyl-1-arylimidazoles ( 3 ) in yields (20–70%) which depend on the degree of substitution of the imidazole ring. The spectral properties of compounds 3 , and particularly the ¹³C-nmr spectra, reflect both the electronic and steric effects of the substituents on the π-electron delocalization and planarity of the bicyclic system.     

Evaluation of the efficiency of extraction of PAHs from diesel particulate matter with pressurized solvents

Pressurized Fluid Extraction (PFE) was evaluated for the extraction of polycyclic aromatic hydrocarbons (PAHs) and nitro-derivatives from diesel particulate matter. Extraction conditions were set up by performing several tests in which temperature, solvent strength, pressure, and static time were gradually increased. The results obtained on a laboratory test material made of a "lean" (low content of soluble fraction) Diesel particulate matter indicate that very severe conditions were needed in order to obtain better recoveries of the higher molecular weight molecules. Moreover, extraction efficiency seems to be influenced by the amount of soluble matter in the particulate, so that a "lean" particulate appears more difficult to extract. Recoveries of the deuterated standards of certain PAHs (i.e. indeno[1,2,3- cd]pyrene) were incomplete even with the toughest conditions tested. Experiments carried out on a certified material (SRM 1650 from NIST) also indicate that PFE can perform a better extraction of some of the PAHs than the method used for certification, but still incomplete. Comparison of results obtained on the SRM with different extraction techniques suggests that the composition of the extract varies considerably with the extraction technique and conditions. It is relevant to notice that recent Diesel engines produce leaner particulate: for future materials more drastic extraction conditions will be required.     

Sampling and convergence in free energy calculations of protein-ligand interactions: The binding of triphenoxypyridine derivatives to factor Xa and trypsin

The binding of a set of 10 triphenoxypyridine derivatives to two serine proteases, factor Xa and trypsin, has been used to analyze factors related to sampling and convergence in free energy calculations based on molecular dynamics simulation techniques. The inhibitors investigated were initially proposed as part of the Critical Assessment of Techniques for Free Energy Evaluation (CATFEE) project for which no experimental results nor any assessment of the predictions submitted by various groups have ever been published. The inhibitors studied represent a severe challenge for explicit free energy calculations. The mutations from one compound to another involve up to 19 atoms, the creation and annihilation of net charge and several alternate binding modes. Nevertheless, we demonstrate that it is possible to obtain highly converged results (+/- 5-10 kJ/mol) even for such complex multi-atom mutations by simulating on a nanosecond time scale. This is achieved by using soft-core potentials to facilitate the creation and deletion of atoms and by a careful choice of mutation pathway. The results show that given modest computational resources, explicit free energy calculations can be successfully applied to realistic problems in drug design.     

Spot overlapping in two-dimensional polyacrylamide gel electrophoresis separations: a statistical study of complex protein maps

A statistical approach able to extract the information contained in a two-dimenisional polyacrylamide gel electrophoresis (2-D PAGE) separation is here reported. The method is based on the quantitative theory of peak overlapping, a procedure previously developed by the authors and here extended to 2-D separations. The whole map is divided into many strips in order to obtain 1-D separations on which the statistic procedure is applied: the developed algorithms, on the basis of spot experimental data (intensity and spatial coordinates) permit to estimate the intrinsic number of components and to single out the specific order present in spot positions. The procedure was validated on computer-simulated maps. Its applicability to real samples was tested on maps obtained from literature sources. The following important information on protein mixtures can be extracted: (i) the number of proteins can be accurately estimated, on the basis of the spatial coordinates and intensities of spots detected in the 2-D PAGE map; (ii) the model describing distribution of interdistance between adjacent spots can be identified in both the separation dimensions; (iii) the presence of repeated interdistances in spot positions in the maps can be easily singled out: these regularities suggest specific protein modifications.     

Calculation of the free energy of solvation for neutral analogs of amino acid side chains

The ability of the GROMOS96 force field to reproduce partition constants between water and two less polar solvents (cyclohexane and chloroform) for analogs of 18 of the 20 naturally occurring amino acids has been investigated. The estimations of the solvation free energies in water, in cyclohexane solution, and chloroform solution are based on thermodynamic integration free energy calculations using molecular dynamics simulations. The calculations show that while the force field reproduces the experimental solvation free energies of nonpolar analogs with reasonable accuracy the solvation free energies of polar analogs in water are systematically overestimated (too positive). The dependence of the calculated free energies on the atomic partial charges was also studied.     

High-performance liquid chromatographic determination of acetone in blood and urine in the clinical diagnostic laboratory.

A method for the determination of acetone in plasma or urine by high-performance liquid chromatography (HPLC) was developed. Plasma specimens are deproteinized with acetonitrile (1:1, v/v) 2,4-dinitrophenylhydrazine (DNPH) is added to the supernatant or to filtered urine samples, similarly treated with acetonitrile (2:1, v/v) to prevent crystallization of the synthesized phenylhydrazone. An aliquot (20 microliters) of the reaction mixture was subjected to HPLC at ambient temperature using a reversed-phase Pecosphere 3 x 3 C18 column with acetonitrile-water (45:55, v/v) as eluent at a flow-rate of 1 ml/min and detection at 365 nm. Hydroxyacetone and acetoacetate phenylhydrazone derivatives do not interfere. The identification of acetone by its retention time was confirmed by comparison with a laboratory-synthesized acetone DNPH derivative. The concentration of acetone, eluted within 3 min, was determined by the peak-height method. The detection limit was 0.034 mmol/l; the relative standard deviations were less than 5% within run (n = 20) and less than 10% between run (n = 20).