Synthesis and spectroscopic properties of highly water-soluble perylene derivatives

Most known perylene diimides are lipophilic, with few exceptions of hydrophilic derivatives. Even in the latter case, the compounds have limited water solubility and show a strong tendency to self-aggregation. In this paper we present the synthesis of four new perylene derivatives with three and four basic side chains, obtained by functionalizing the bay-area of perylene. These molecules show great solubility in aqueous media as hydrochlorides and their tendency to self-aggregate is remarkably reduced with respect to the previously synthesized two-chained perylene diimides. Their different spectroscopic properties in various solvents and conditions are reported and discussed.     

Incorporating the effect of ionic strength in free energy calculations using explicit ions

The incorporation of explicit ions to mimic the effect of ionic strength or to neutralize the overall charge on a system in free energy calculations using molecular dynamics simulations is investigated. The difference in the free energy of hydration between two triosephosphate isomerase inhibitors calculated at five different ion concentrations is used as an example. We show that the free energy difference can be highly sensitive to the presence of explicit ions even in cases where the mutation itself does not involve a change in the overall charge. The effect is most significant if the molecule carries a net charge close to the site mutated. Furthermore, it is shown that the introduction of a small number of ions can lead to very severe sampling problems suggesting that in practical calculations convergence can best be achieved by incorporating either no counterions or by simulating at high ionic strength to ensure sufficient sampling of the ion distribution.     

A Formal Total Synthesis of (+)-Methyl Trachyloban-18-oate and (+)-Methyl 16-Oxo-17-norkauran-18-oate: Regio- and Diastereoselective Preparation of Methyl (13S)-13-Hydroxyisoatisiren-18-oate from (−)-Abietic Acid

A novel preparation of methyl (13S)-13-hydroxyisoatisiren-18-oate ( 4 ), a key-intermediate in a synthesis of (+)-methyl trachyloban-18-oate ((+)- 1 ), from (?)-abietic acid, is described. Since (?)- 1 has been previously converted into (?)-methyl 16-oxo-17-norkauran-18-oate ((?)- 16 ), our preparation of 4 constitutes also a formal total synthesis, from (?)-abietic acid, of (+)- 16 . Key steps in this approach were the allene photoaddition to podocarp-8(14)-en-13-one ( 5 ) and the conversion of the endo-toluene-4-sulfonate 11 into the exo-benzoate 12b .     

High-performance liquid chromatography with post-column derivatisation and fluorescence detection for sensitive determination of aflatoxin M1 in milk and cheese

A new HPLC method with fluorescence detection using pyridinium hydrobromide perbromide as a post-column derivatising agent has been developed to determine aflatoxin M1 in milk and cheese. The detection limits were 1 ng/kg for milk and 5 ng/kg for cheese. The calibration curve was linear from 0.001 to 0.1 ng injected. The method includes a preliminary C18-SPE clean-up and the average recoveries of Aflatoxin M1 from milk and cheese, spiked at levels of 25-75 ng/kg and 100-300 ng/kg, respectively, were 90 and 76%; the precision (RSDr) ranged from 1.7 to 2.6% for milk and from 3.5 to 6.5% for cheese. The method is rapid, easily automatable and therefore useful for accurate and precise screening of aflatoxin M1 in milk and cheese.     

Understanding binding affinity: a combined isothermal titration calorimetry/molecular dynamics study of the binding of a series of hydrophobically modified benzamidinium chloride inhibitors to trypsin

The binding of a series of p-alkylbenzamidinium chloride inhibitors to the serine proteinase trypsin over a range of temperatures has been studied using isothermal titration (micro)calorimetry and molecular dynamics simulation techniques. The inhibitors have small structural variations at the para position of the benzamidinium ion. They show small differences in relative binding affinity but large compensating differences in enthalpy and entropy. Binding affinity decreases with increased branching at the first carbon but increases with increasing the length of a linear alkyl substituent, suggesting that steric hindrance and hydrophobic interactions play dominant roles in binding. Structural analysis showed that the backbone of the enzyme was unaffected by the change of the para substituent. In addition, binding does not correlate strongly with octanol/water partition data. To further characterize this system, the change in the heat capacity on binding, the change in solvent-accessible surface area on binding, the effect of inhibitor binding on the hydration of the active site, the pK(a) of His57, and interactions within the catalytic triad have been investigated. Although the changes in inhibitor structure are small, it is demonstrated that simple concepts such as steric hindrance, hydrophobicity, and buried surface area are insufficient to explain the binding data. Other factors, such as access to the binding site and the cost of dehydration of the active site, are of equal or greater importance.     

2-(2-Hydroxyaryl)cinnamic amides: a new class of axially chiral molecules

The syntheses of several differently substituted amides formally derived from a chiral amine, either E-2-(2-hydroxyphenyl)cinnamic acid or both E- and Z-2-(2-hydroxynaphthyl)cinnamic acid, are reported. These molecules display a restricted rotation about the C₂-C_aryl bond. The barriers to rotation about the C₂-C_aryl bond were measured by the dynamic ¹H NMR and were found to vary between 11.8 and 24.5 kcal mol⁻¹, depending on the substitution. In particular, E-2-(2-hydroxynapthyl)cinnamic amides, displayed a high barrier to rotation (ΔG_c^‡=24.4 kcal mol⁻¹) and could be isolated in both diastereomerically pure forms at room temperature. The X-ray structure of one E-2-(2-hydroxynapthyl)cinnamic amide, was resolved, enabling for the determination of the absolute configuration of the chiral axis (aR).     

Synthesis of 4H-3,1-benzoxazines, quinazolin-2-ones, and quinoline-4-ones by palladium-catalyzed oxidative carbonylation of 2-ethynylaniline derivatives

An effective and straightforward approach to the synthesis of 4H-3,1-benzoxazines 3 and 4, quinazolin-2-ones 5, and quinoline-4-one derivatives 6 and 7 is provided by palladium-catalyzed cyclization-alkoxycarbonylation of variously substituted 2-(trimethylsilanyl)ethynylaniline amide or urea derivatives 2. Reactions are carried out in 7:1 MeCN/MeOH at 65 or 75 degrees C in the presence of catalytic amounts of 10% Pd/C in conjunction with Bu(4)NI and KF and under 2.4 MPa of a 3:1 mixture of CO and air. Anti and syn 6-exo-dig cyclization modes account for the formation of the two stereoisomers. Isomerization of the vinylpalladium intermediate may occur as well. Formation of a double carbonylation product 7r and of a gem-dimethoxycarbonylation product 6s, whose structures have been determined by X-ray diffraction analysis, is justified through an unusual type of rearrangement.     

Olive mill wastewater treatment by a pilot-scale subsurface horizontal flow (SSF-h) constructed wetland

Performances of a pilot-scale reed bed for the olive mill wastewater (OMW) treatment were investigated, by monitoring influent and effluent pH, total suspended solids (TSS), chemical oxygen demand (COD), total Kjeldahl nitrogen (TKN), total phosphorus and polyphenols. In order to reduce the suspended matter concentration and to avoid clogging, OMW was pre-treated by adding lime putty, calcium hydroxide and hydraulic lime. The best results were obtained with 2 g/L of hydraulic lime. Pre-treated OMW was dosed in the reed bed at dilution ratios of 1/3 and 1/10 (v/v), pointing up that the latter only did not give rise to reed suffering and allowed to obtain good and durable removal efficiencies, above all for COD (74.1+/-17.6%) and polyphenols (83.4+/-17.8%). Recycling of the effluent was quite effective for the improvement of the wastewater quality, allowing a further removal of 26-70%, depending on the parameter taken into account. A post-dosage study, carried out by feeding the reed bed with the effluent of an activated sludge plant, pointed up a rapid decreasing of the outlet concentrations of the investigated parameters to values compatible with Italian regulations concerning wastewater discharge in surface water. Polyphenols were the exception, being their outlet concentration at the end of post-dosage study around 2 mg/L.     

Variational transition state theory without the minimum-energy path

In this paper we propose a method for carrying out variational transition state theory calculations without first obtaining a converged minimum-energy path (MEP). We illustrate the method in two ways, first of all by employing an unconverged MEP and secondly by using a dynamically optimized distinguished reaction path. Preliminary tests of the algorithm for the reactions OH+H₂→H₂O+H and C₂H₅→C₂H₄+H are very encouraging. Received: 22 January 1997 / Accepted: 11 March 1997     

Detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate by gas liquid chromatography of triacylglycerols

The development and in-house testing of a method for the detection and quantification of cocoa butter equivalents in cocoa butter and plain chocolate is described. A database consisting of the triacylglycerol profile of 74 genuine cocoa butter and 75 cocoa butter equivalent samples obtained by high-resolution capillary gas liquid chromatography was created, using a certified cocoa butter reference material (IRMM-801) for calibration purposes. Based on these data, a large number of cocoa butter/cocoa butter equivalent mixtures were arithmetically simulated. By subjecting the data set to various statistical tools, reliable models for both detection (univariate regression model) and quantification (multivariate model) were elaborated. Validation data sets consisting of a large number of samples (n = 4050 for detection, n = 1050 for quantification) were used to test the models. Excluding pure illipé fat samples from the data set, the detection limit was determined between 1 and 3% foreign fat in cocoa butter. Recalculated for a chocolate with a fat content of 30%, these figures are equal to 0.3-0.9% cocoa butter equivalent. For quantification, the average error for prediction was estimated to be 1.1% cocoa butter equivalent in cocoa butter, without prior knowledge of the materials used in the blend corresponding to 0.3% in chocolate (fat content 30%). The advantage of the approach is that by using IRMM-801 for calibration, the established mathematical decision rules can be transferred to every testing laboratory.