Photophysical and (photo)electrochemical properties of a coumarin dye

A new coumarin dye, cyano-{5,5-dimethyl-3-[2-(1,1,6,6-tetramethyl-10-oxo-2,3,5,6-tetrahydro-1H,4H,10H-11-oxa-3a-aza-benzo[de]anthracen-9-yl)vinyl]cyclohex-2-enylidene}-acetic acid (NKX-2753), was prepared and characterized with respect to photophysical and electrochemical properties. It was employed as a dye sensitizer in dye-sensitized solar cells and showed efficient photon-to-electron conversion properties. The photocurrent action spectrum exhibited a broad feature with a maximum incident photon-to-electron conversion efficiency (IPCE) of 84% at 540 nm, which is comparable to that for the famous red dye RuL2(NCS)2 (known as N3), where L stands for 2,2'-bipyridyl-4,4'-dicarboxylic acid. The sandwich-type solar cell with NKX-2753, under illumination of full sun (AM1.5, 100 mW cm(-2)), produced 16.1 mA cm(-2) of short-circuit photocurrent, 0.60 V of open-circuit photovoltage, and 0.69 of fill factor, corresponding to 6.7% of overall energy conversion efficiency using 0.1 M LiI, 0.05 M I2, 0.1 M guanidinium thiocyanate, and 0.6 M 1,2-dimethyl-3-n-propyl-imidazolium iodide in dry acetonitrile as redox electrolyte. In comparison with its analogue NKX-2586 (Langmuir 2004, 20, 4205), NKX-2753 with an extra side ring on the alkene chain produced much higher IPCE values at the same conditions. The side ring acted as a spacer to efficiently prevent dye aggregation when adsorbed on the TiO2 surface, resulting in significant improvements of short-circuit photocurrent, open-circuit photovoltage, and fill factor compared with NKX-2586 that aggregated on the TiO2 surface.     

Adsorption and reactions of NO on clean and CO-precovered Ir(111)

Adsorption and reactions of NO on clean and CO-precovered Ir(111) were investigated by means of X-ray photoelectron spectroscopy (XPS), high-resolution electron energy loss spectroscopy (HR-EELS), infrared reflection absorption spectroscopy (IRAS), and temperature-programmed desorption (TPD). Two NO adsorption states, indicative of fcc-hollow sites and atop sites, were present on the Ir(111) surface at saturation coverage. NO adsorbed on hollow sites dissociated to Na and Oa at temperatures above 283 K. The dissociated Na desorbed to form N2 by recombination of Na at 574 K and by a disproportionation reaction between atop-NO and Na at 471 K. Preadsorbed CO inhibited the adsorption of NO on atop sites, whereas adsorption on hollow sites was not affected by the coexistence of CO. The adsorbed CO reacted with dissociated Oa and desorbed as CO2 at 574 K.     

On-line preconcentration using dual mini-columns for the speciation of chromium(III) and chromium(VI) and its application to water samples as studied by inductively coupled plasma-atomic emission spectrometry

On-line preconcentration system for the selective, sensitive and simultaneous determination of chromium species was investigated. Dual mini-columns containing chelating resin were utilized for the speciation and preconcentration of Cr(III) and Cr(VI) in water samples. In this system, Cr(III) was collected on first column packed with iminodiacetate resin. Cr(VI) in the effluent from the first column was reduced to Cr(III), which was collected on the second column packed with iminodiacetate resin. Hydroxyammonium chloride was examined as a potential reducing agent for Cr(VI) to Cr(III).The effects of pH, sample flow rate, column length, and interfering ions on the recoveries of Cr(III) were carefully studied. Five millilitres of a sample solution was introduced into the system. The collected species were then sequentially washed by 1 M ammonium acetate, eluted by 2 M nitric acid and measured by ICP-AES. The detection limit for Cr(III) and Cr(VI) was 0.08 and 0.15 μg l⁻¹, respectively. The total analysis time was about 9.4 min.The developed method was successfully applied to the speciation of chromium in river, tap water and wastewater samples with satisfied results.     

Carbamoylimidazolium and thiocarbamoylimidazolium salts: novel reagents for the synthesis of ureas, thioureas, carbamates, thiocarbamates and amides

Carbamoylimidazolium salts act as efficient N,N-disubstituted carbamoylating reagents. These salts are readily prepared by the sequential treatment of secondary amines with N,N′-carbonyldiimidazole (CDI) and iodomethane. The carbamoylimidazolium salts are more efficient carbamoyl transfer reagents than the intermediate carbamoylimidazoles, as a result of the ‘imidazolium’ effect. Kinetic studies on the base promoted hydrolysis of both carbamoylimidazoles and carbamoylimidazolium salts reveal over a hundred-fold rate acceleration. The salts react with amines, thiols, phenols/alcohols, and carboxylic acids in high yields, without the need for subsequent chromatographic purification of the products, producing ureas, thiocarbamates, carbamates, and amides, respectively. Analogous thiocarbamoylimidazolium salts were also synthesized from secondary amines and N,N′-thiocarbonyldiimidazole (TCDI), followed by methylation with iodomethane.     

Analysis of scintigrams using fuzzy theory

Textural features for phantom images were extracted. Texture parameters which represent RI distribution--skew, energy, entropy and angular second moment were used. But, it was difficult to analyse the images using discriminant analysis for textural features, because textural features had statistical noise. Therefore fuzzy reasoning was adapted to analyse the images. Textural features for six kinds of images were showed using membership function. The possibility to the image was evaluated using the value of membership function on each images. Fuzzy reasoning could be done easily using max-min composition formula. The reasoning was found more suitable to analyse the images than discriminant analysis and will be considered useful for analysis of clinical scintigrams.     

Catalytic Active Site for NO Decomposition Elucidated by Surface Science and Real Catalyst

Comprehensive studies combining surface science and real catalyst were performed to get further insight into catalytic active site and reaction mechanism for NO decomposition over supported palladium and cobalt oxide-based catalysts. On palladium single-crystal model catalysts, adsorption, dissociation and desorption behavior of NO was found to be closely related to the surface structures, the stepped surface palladium being active for dissociation of NO. In accordance with this result, the activity of powder Pd/Al₂O₃ catalysts for NO decomposition was directly related to the number of step sites exposed on the surface, suggesting that the step sites act as the catalytic active site for NO decomposition on Pd/Al₂O₃. NO decomposition over cobalt oxide was found to be significantly promoted by addition of alkali metals. Surface science study and catalyst characterization led to the same conclusion that the interface between the alkali metal and Co₃O₄ serves as the catalytic active site. From the results of in situ Fourier transform infrared (FT-IR) spectroscopy and isotopic transient kinetic analysis, a reaction mechanism was proposed in which the reaction is initiated by NO adsorption onto alkali metals to form NO₂⁻ species and then NO₂⁻ species react with the adsorbed NO species to form N₂ over the interface between the alkali metal and Co₃O₄.     

Inter- and intramolecular activation of aromatic C-H bonds by diphosphine and hydrido-bridged dinuclear iridium complexes

Reactions of [(Cp*Ir)2(mu-dmpm)(mu-H)2]2+ (1) with NaOtBu in aromatic solvent at room temperature give [(Cp*Ir)(H)(mu-dmpm)(mu-H)(Cp*Ir)(Ar)]+ [Ar = Ph (3), p-Tol (4a), m-Tol (4b), 2-furanyl (5a), 3-furanyl (5b)] via intermolecular aromatic C-H activation. Treatment of [(Cp*Ir)2(mu-dppm)(mu-H)2]2+ (2) with base (Et2NH) results in intramolecular C-H activation of the phenyl group in the dppm ligand to give [(Cp*Ir)(H){mu-PPh(C6H4)CH2PPh2}(mu-H)(Cp*Ir)]+ (6). The structures of 3, 5a, and 6 have been determined by X-ray diffraction methods.     

Fluorescent Molecular Recognition and Sensing System of Bis-Dansyl Modified γ-Cyclodextrins

Flexible hosts, 6A,6B-; 6A,6C-; 6A,6D-; and 6A,6E-bis dansylglycine-modified -cyclodextrins (-1, -2, -3, and -4, respectively) have been synthesized as a sensing molecule for organic guests including terpenoids and bile acids. These host compounds show a pure monomer fluorescence whose intensity is decreased or enhanced upon addition of guest species. The value I/I₀, where I and I₀ are fluorescence intensities in the presence and absence of a guest and I is I₀- I, was used as a parameter of sensitivity. These hosts exhibit highly sensitive and selective molecular recognition ability, particularly, for lithochoic acid, chenodeoxycholic acid, and ursodeoxycholic acid. The behaviors of the appended moieties of these hosts when host–guest complexation occurs are studied by induced circular dichroism (ICD) spectra and fluorescence spectral change on accommodation of a guest. The ICD pattern of these hosts alone or on accommodation of a guest is very similar, indicating that the behavior of the appended moieties are very similar. The guest-induced variations in the fluorescence or ICD intensity suggest that the appended moieties act as a hydrophobic cap that enables the cyclodextrin to form 1 : 1 host–guest complexes.     

Combined analysis of microwave and infrared spectra of methyl iodide: rotational and l-type doubling constants of the v5, v3+v6 and v2 states

The rotational constant B and the l-type doubling constant q were determined for the v₅, v₃+v₆ and v₂, states of CH₂I from the microwave transition frequencies, in combination with the infrared data previously reported. Since these vibrational states were coupled through the Fermi resonance and the xy-type E-E and A₁-E Coriolis resonances, the analysis was made by setting up and solving the complete form of the secular determinants of the energy matrices. The rotational and l-type doubling constants were determined as B₅, = 0.250 173 cm^?1, B₃₆ = 0.247 600 cm^?1, B₂ = 0.249 369 cm^?1, q₅ = ?0.000 027 cm^?1 and q₃₆ = ?0.000 179 cm^?1, which are unperturbed by Fermi and Coriolis interactions. Other band constants for v₅ and v₃+v₆ were also refined in accordance with the new values of B₅ and B₃₆. The present study indicated that the combined analysis of microwave and infrared spectral data was useful for the precise determination of vibration-rotation, levels in the perturbed system.     

Small-angle x-ray scattering from solution of rodlike particles with length distribution

The scattering function of rods with a constant radius, 8 Å, and a length distribution of the Schulz–Zimm type was calculated on a computer as a model of helical synthetic polypeptide. The influence of length and length distribution on the scattered intensity of small-angle x-ray scattering was clarified. As length grows and length distribution broadens it is difficult to obtain reliable values of molecular weight and radius of gyration from a Zimm plot. The influence of length distribution on the mass per unit length, M_q, and the radius of gyration of the cross section, 〈S〉^1/2, from the Guinier plot of the cross-sectional factor decreases as the length increases, and reliable values of M_q and 〈S〉^1/2 can be obtained even for rods with wide distribution for rods more than 600 Å long. In particular, it is pointed out that the value of 〈S〉^1/2 is little influenced by length and length distribution.