Low-temperature bath/coupled-capillary/sweeping-micellar electrokinetic capillary chromatography for the separation of naphthalene-2,3-dicarboxaldehyde-derivatized dopamine and norepinephrine

The use of a low-temperature (0 degrees C) bath-assisted coupled capillary for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized dopamine and norepinephrine using the sweeping-micellar electrokinetic capillary chromatography (MEKC) mode is described. In this technique, a capillary consisting of two portions with different inside diameters is used. Therefore, the field strength inside the capillary is different. Hence, the electrophoretic migration velocities of the analytes and the electro-osmotic flow (EOF) also are different. Furthermore, when a portion of the capillary (wide portion, used for sweeping) is immersed in a low-temperature bath, the viscosity of the buffer and the retention factor of the analytes inside are increased. Thus, not only are the interactions between the SDS micelles and the analytes increased, but the SDS-analytes also move more slowly. As a result, a more complete separation can be achieved, even when the sample injection volume is large, up to approximately 2 microL. In general, when the volume of an injected sample is larger, the effects of sweeping and separation would become insufficient, especially when the retention values (k) of the analytes are quite different. However, this limitation can be improved when the low-temperature bath/coupled capillary/sweeping-MEKC mode is used.     

Comparison of cartesian and lobe function Gaussian basis sets

The lobe function and cartesian (spherical harmonic) gaussian are compared with reference to calculations for second-row atoms. Single and grouped gaussian basis sets which have been reported for cartesian functions are taken over directly to construct corresponding lobe function bases with identical sets of exponents and with lobe separations chosen by a scaling procedure. Total and orbital energies and SCF coefficients resulting from calculations on the second-row atoms using the two types of functions for both primitive and grouped gaussian basis sets are seen to be in excellent agreement, thereby emphasizing the essential equivalence of lobe functions and cartesian gaussians, at the very least with respect to calculation of energy surfaces.

---

Zusammenfassung Die Lobe-Funktionen und kartesischen (Kugelfunktions-) Gaußfunktionen werden in Berechnungen von Atomen der zweiten Reihe des periodischen Systems verglichen. Schon bekannte einfache und gruppierte Gaußfunktionsbasissätze für kartesische Funktionen werden direkt übernommen, um entsprechende Lobe-Funktionsbasen mit identischen Exponenten zu konstruieren, wobei die zugehörigen Lobe-Abstände nach einer Koordinatenstreckungs-(scaling) Methode berechnet werden. Gesamt- und Orbitalenergien sowie SCF-Koeffizienten für die Atome der zweiten Reihe stimmen bei Benutzung der beiden verschiedenen Funktionstypen, sowohl bei einfacher als auch bei gruppierter Gaußfunktionsbasis, außerordentlich gut überein, wodurch die wesentliche Gleichwertigkeit von Lobe-Funktionen und kartesischen Gaußfunktionen betont wird, zum allermindesten hinsichtlich der Berechnung von Energieflächen.

---

Résumé La fonction de lobe et la gaussienne cartésienne (harmonique sphérique) sont comparées sur des calculs d'atomes de la seconde ligne. Des bases de gaussiennes simples et groupées utilisées pour les fonctions cartésiennes sont directement employées pour construire les bases correspondantes de fonctions à lobes avec des ensembles d'exposants identiques et des séparations de lobes choisis par calibrage. L'emploi de ces deux types de fonctions donne des résultats concordants pour l'énergie totale, les énergies orbitales et les coefficients SCF, mettant l'accent sur l'équivalence essentielle des fonctions à lobe et des gaussiennes cartésiennes, tout au moins pour le calcul des surfaces d'énergie.

     

Low-energy electron diffraction and auger electron spectroscopy study of the oxidation of Ti {0001} at room temperature

The reaction of a clean Ti (0001) surface with oxygen gas at low pressure and room temperature has been studied with low-energy electron diffraction (LEED) and Auger electron spectroscopy (AES). At low exposures (about 1 Langmuir) ap(2×2) superstructure is observed which gradually converts to 1×1 at high exposures (about 100 Langmuirs). The LEED spectra confirm that the final 1×1 structure is different from that of clean Ti (0001), while the AES spectra indicate that the final oxide is probably TiO, not TiO₂. The plausibility of this indication is discussed.     

6β-Acetoxy-7 α-Hydroxyroyleanone,A New Compound from Taiwania Cryptomerioides Hayata

Two crystalline compounds from the bark of Taiwania cryptomerioides Hayata were isolated. One of them was identified as 6,7-dehydroroyleanone and the other was shown to be a new derivative of royleanone having a structure of 6β-acetoxy-7α-hydroxyroyleanone.     

Miscibility and transesterification in ternary blends of poly(ethylene naphthalate)/poly(trimethylene terephthalate)/poly(ether imide)

Miscibility and morphology of poly(ethylene 2,6-naphthalate)/poly(trimethylene terephthalate)/poly(ether imide) (PEN/PTT/PEI) blends were investigated by using a differential scanning calorimeter (DSC), optical microscopy (OM), wide-angle X-ray diffraction (WAXD), and proton nuclear magnetic resonance (¹H-NMR). In the ternary blends, OM and DSC results indicated immiscible properties for polyester-rich compositions of PEN/PTT/PEI blends, but all compositions of the ternary blends were phase homogeneous after heat treatment at 300 °C for more than 30 min. An amorphous blend with a single T _g was obtained in the final state, when samples were annealed at 300 °C. Experimental results from ¹H-NMR identified the production of PEN/PTT copolymers by so-called “transesterification”. The influence of transesterification on the behaviors of glass transition and crystallization was discussed in detail. Study results identified that a random copolymer promoted the miscibility of the ternary blends. The critical block lengths for both PEN and PTT hindered the formation of crystals in the ternary blends. Finally, the transesterification product of PEN/PTT blends, ENTT, was blended with PEI. The results for DSC and OM demonstrated the miscibility of the ENTT/PEI blends.     

Difference in Conversions Between Dimethyl Sulfide and Methanethiol in a Cold Plasma Environment

This study compared the conversion of two malodorous substances, dimethyl sulfide (CH₃SCH₃, DMS) and methanethiol (CH₃SH) in a cold plasma reactor. The DMS and CH₃SH were successfully destroyed at room temperature. DMS decomposed less than CH₃SH at the same conditions. In oxygen-free condition, CS₂ and hydrocarbons were the major products, while SO₂ and CO_x were main compounds in oxygen-rich environments. The DMS/Ar plasma yielded more hydrocarbons and less CS₂ than that of CH₃SH/Ar plasma. In the CH₃SH/O₂/Ar plasma, rapid formation of SO and CO resulted in the yields much more amounts of SO₂ and CO₂ than those in the DMS/O₂/Ar plasma; and remained only a trace of total hydrocarbons, CH₂O, CH₃OH, CS₂, and OCS. The major differences between the reaction mechanisms of DMS and CH₃SH were also proposed and discussed.     

Cyclocondensation of 3-amino-2-iminonaphtho[1,2-d]-thiazole with α-ketocarboxylic acid derivatives: Synthesis of 2-substituted 3-Oxo-3H-naphtho[1′,2′:4,5]thiazolo-[3,2-b][1,2,4]triazines as potential anti-HIV agents

The cyclocondensation of 3-amino-2-iminonaphtho[1,2-d]thiazole ( 1 ) with a series of α-keto mono- and dicarboxylic acid derivatives 5a-i under different conditions was investigated. When the experiments were performed by refluxing in glacial acetic acid, the corresponding cyclized products, 2-substituted 3-oxo-3H-naphtho[1′,2′:4,5]thiazolo[3,2-b][1,2,4]triazines 4 were obtained in fair to good yields. On the other hand, when the reaction was conducted in boiling ethanol, it gave only the open chain condensates 6 , or in rare cases, together with minor amount of 4 . Since the intermediates 6 exist as mixture of both E- and Z-isomers, cyclization through heating was found insufficient. In any event representative compounds 4b,g,i have been evaluated for anti-HIV activity, but none of them were active.     

Determination of aniline in silica gel sorbent by one-step in situ microwave-assisted desorption coupled to headspace solid-phase microextraction and GC-FID

Microwave-assisted desorption (MAD) coupled to in situ headspace solid-phase microextraction (HS-SPME) was first proposed as a possible alternative pretreatment of samples in absorbent collected from workplace monitoring. Aniline collected on silica gel was investigated. Under microwave irradiation, the aniline was desorbed from silica gel and directly absorbed onto the SPME fiber in the headspace. Having been sampled on the SPME fiber, and desorbed in the GC injection port, aniline was analyzed using a GC-FID system. Parameters that affect the proposed extraction efficiency, including the extraction media and its pH, the microwave irradiation power and the irradiation time as well as desorption parameters of the GC injector, were investigated. Experimental results revealed that the extraction of a 150-mg silica gel sample using a 0.8-ml aqueous solution (pH 12) and a PDMS/DVB fiber under medium-high-powered irradiation (345 W) for 3 min maximized the efficiency of extraction. Desorption of aniline from the SPME fiber was optimal at 230 °C held for 3 min. The detection limit was 0.09 ng. The proposed method provided a simple, fast, and organic solvent-free procedure to analyze aniline from a silica gel matrix.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.     

The oxidative addition of hydrogen sulfide to the electron-rich triple bond: The isolation and characterization of compounds that contain the Re2(μ-H)(μ-SH) cluster unit

The reactions of Re₂X₄(-dppm)₂ (X=Cl or Br; dppm=Ph₂PCH₂PPh₂) with H₂S in THF afford the dirhenium (III) complexes Re₂(-H)(-SH)X₄(-dppm)₂, the first examples of the oxidative addition of an S-H unit across an electron-rich metal-metal triple bond. The bromide complex Re₂(-H)(-SH)Br₄(-dppm)₂ (C₂H₅)₂O crystallizes in the space group P2₁/n witha=16.631(2) Å,b=15.967(3) Å,c=19.904(2) Å, =92.698(7)°,V=5279(2) ų, andZ=4. The structure which was refined toR=0.053 (R _w=0.070) for 4903 data withI>3.0(I), shows the presence of an edge-shared bioctahedral geometry with a very short Re-Re distance of 2.4566(7) Å. While the hydrogen atoms of the -H and -SH ligands were not located in the X-ray structure determination, their presence is confirmed by IR and¹H NMR spectroscopy.