Zig‐Zag Diphosphene Oligomers Linked by Silver(I) Cation

The coordination of silver cation to diphosphene Mes*P=PMes* ( 1 , Mes* = ^tBu₃C₆H₂) was investigated in detail. The reaction of 1 with Ag[Al(OR_F)₄] (OR_F = OC(CF₃)₃) in the ratios of 2 : 1, 3 : 2 and 1 : 2 led to the formation of the first cationic silver linked diphosphene complexes 2 — 4 . Complexes 2 and 3 contain two and three diphosphene molecules linked by the linear Ag(I) cation, respectively, and they feature unusual zig‐zag topologies. Complex 4 is a dinuclear silver complex, and each Ag(I) center features a tetrahedral geometry, coordinated by one phosphorus atom of diphosphene 1 and three chloro atoms of two CH₂Cl₂ molecules.     

Voltammetric studies of microcrystalline C60 adhered to a carbon electrode surface and placed in contact with aqueous electrolyte containing potassium ions

The reduction of microcrystalline C₆₀ fullerene, adhered at a carbon electrode and immersed in aqueous electrolyte, has been studied under various voltammetric conditions. This work reports mainly the voltammetric studies carried out principally in electrolyte containing potassium ions. Comparison of adherence techniques, such as solvent casting and mechanical transfer methods, are made to assess if the type of adhered techniques has any significant influence on the observed electrochemistry. The solvent casting method is found to produce three peaks in the potential for C₆₀^0/n- redox couple as compared to a single and large peak produced when a mechanical transfer technique is employed. When the reduction potential of microcrystalline C₆₀ in the presence of K⁺ is compared with other cations, such as Li, Na, Rb and Cs, it is observed that the shift of reduction potential follows the change in the hydration energy in the order Cs>Rb>K>Na>Li. In a mixed electrolyte study of CsCl/KCl, the reduction potential and peak shape of C₆₀^0/n- redox couple during cyclic voltammetry is observed to change with concentration of the cations and the observed electrochemistry can be attributed to a cation-exchange mechanism. The reduction of C₆₀ is irreversible in aqueous electrolyte containing alkaline cations as the re-oxidation process does not produce any observed electro-activity. Evidence of the formation of a passive coating of K _n C₆₀ fulleride, which does not appear to undergo dissolution is obtained under cyclic voltametric conditions. This coating remains electrochemically active in the presence of tetrabutylammonium ions in acetonitrile. Scan rate, chronocoulometric, and scanning electron microscopic studies provide evidence of the presence of a surface process involving solid–solid transformation.     

水-乙醇二元体系共沸混合物的热力学研究

用全自动低温绝热量热计测定了水、乙醇以及水和乙醇组成的共沸混合物在不同温区的摩尔热容Cp,m. 建立了共沸混合物Cp,m与温度T的函数关系.结果表明,水和乙醇组成的共沸混合物在98.496 K发生玻璃态转化,在158.939 K 和270.95 K发生固-液相变.获得了其相应的相变焓和相变熵.计算了以298.15 K为基准的该共沸混合物的热力学函数和超额热力学函数.     

络合型催化剂丙烯聚合动力学研究

本工作对络合型(Solvay型)TiCl_3催化剂—(C_2H_5)_2AlCl体系丙烯聚合进行了活性中心浓度C_p、链增长速率常数k_p和链增长活化能E_p等的测定,并与常规TiCl_3·0.33AlCl_3进行了比较,C_p以动力学方法求取,数均分子量以粘度法测定经分子量分布校正,结果表明,络合型催化剂活性比常规催化剂高,不仅是由于C_p增高,在更大程度上是由于k_p提高。     

Aromatization of methane over different Mo-supported catalysts in the absence of oxygen

Both acidity and structure of the support are important factors in converting methane to aromatics. Lower SiO₂/Al₂O₃ ratio seems to favor the aromatization of methane over the Mo/HZSM-5 catalyst. When Pt is added as a modifier the activity of Mo/HZSM-5 catalyst will decrease slightly, but coke formation will enhanced.     

Catalytic Oxidation of Dimethyl Ether to Dimethoxymethane over Cs Modified HaPW12O40/SiO2 Catalysts

The attractive utilization route for one-step catalytic oxidation of dimethyl ether to dimethoxymethane was successfully carried out over the H3PW12O40（40%）/SiO2 catalyst, modified by Cs, K, Ni, and V. The Cs modification of H3PW12O40（40%）/SiO2 gave the most promising result of 20% dimethyl ether conversion and 34.8% dimethoxymethane selectivity. Dimethoxymethane could be synthe- sized via methoxy groups decomposed from dimethyl ether through the synergistic effect between the acid sites and the redox sites of Cs modified H3PW12O40（40%）/SiO2.     

非晶SiO2纳米灯笼的制备和表征

在1000 ℃用活性炭把二氧化锡粉末还原成单质锡, 锡作为催化剂, 硅片作为硅源同时作为收集衬底, 在硅片上制备出了非晶SiO2纳米灯笼. 灯笼的一端连在硅片上, 另一端为一个锡球, 中间是一些圆弧状的SiO2纳米线把两端相连. 纳米灯笼具有良好的对称性. 利用扫描电子显微镜(SEM)、高分辨透射电子显微镜(HRTEM)、选区电子衍射(SAED) 和HRTEM自带的能谱分析仪(EDS)对样品的表面形貌、微观结构和成分进行了分析研究. 结果表明, 灯笼中SiO2纳米线为非晶态, 结点是晶态锡, 结点表面覆盖一层非晶态的硅的氧化物. 结合实验条件对纳米灯笼的生长机理进行了讨论, 提出了纳米灯笼生长的一个模型.     

High-resolution electron microscopy of montmorillonite and montmorillonite/epoxy nanocomposites

With the use of high-resolution transmission electron microscopy the structure and morphology of montmorillonite (MMT), a material of current interest for use in polymer nanocomposites, was characterized. Using both imaging theory and experiment, the procedures needed to generate lattice images from MMT were established. These procedures involve careful control of the microscope's objective lens defocus to maximize contrast from features of a certain size, as well as limiting the total dose of electrons received by the sample. Direct images of the MMT lattice were obtained from neat Na+ MMT, organically modified MMT, and organically modified MMT/epoxy nanocomposites. The degree of crystallinity and turbostratic disorder were characterized using electron diffraction and high-resolution electron microscopy (HREM). Also, the extent of the MMT sheets to bend when processed into an epoxy matrix was directly visualized. A minimum radius of curvature tolerable for a single MMT sheet during bending deformation was estimated to be 15 nm, and from this value a critical failure strain of 0.033 was calculated. HREM can be used to improve the understanding of the structure of polymer nanocomposites at the nanometer-length scale.     

Syntheses and configurations of some heterocyclic amidoximes. X-Ray crystal structure of 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime

O-Methyl-α-ketophenylacetohydroximoyl chloride ( 1 ) was prepared by the reaction of O-methyl-α-methoxyphenylacetohydroximoyl chloride ( 5 ) with N-bromosuccinimide and concentrated hydrobromic acid. Reaction of 1 with ethylenediamine gave 3-phenyl-5,6-dihydro-2(1H)-pyrazinone-O-methyloxime ( 6 ). 3-Phenyl-5,6-cyclohexano-5,6-dihydro-2(1H)-pyrazininone-O-methyloxime ( 7 ) was prepared by reaction of 1 with trans-1,2-diaminocyclohexane. The X-ray structure of 6 has been determined. The crystals are orthorhombic, space group Pbca with a = 10.264(3), b = 18.262(4), c = 23.530(4)Å, V = 4411(2)ų, and Z = 16. The structure, which was refined to R = 0.038 using 1652 observed reflections, shows the amidoxime moiety to be the Z configuration. Reaction of benzohydroximoyl chloride with aziridine gave (Z)-aziridinylbenzaldoxime ( 16a ). Ultraviolet irradiation of a benzene solution of 16a gave a mixture of the Z and E isomers 16a and 16b . The E isomer 16b underwent thermal isomerization to 16a at 100°. Reaction of 16a with dimethyl sulfate in sodium hydroxide solution gave (Z)-O-methylaziridinylbenzaldoxime ( 17a ). Photoisomerization of a hexane solution of 17a gave a mixture of the Z and E isomers 17a and 17b which were separated by preparative glc. The isomers 17a and 17b are resistant to thermal Z = E isomerization. The mechanisms of thermal isomerization of benzamidoximes are discussed.