Relaxation of the optical Kerr effect of anisotropic molecules in mixed liquids

The relaxation time of the Kerr effect of nitrobenzene and m-nitrotoluene in various mixtures with carbon tetrachloride and various alcohols was determined by measuring the kinetics of the Kerr effect using picosecond laser techniques. These measurements yield information on the rotational motion of molecules in liquids. The relaxation time data are interpreted in terms of an effective local viscosity effect, pair correlation, and coupling of rotational motion with shear modes.     

Sulfonated poly(ether ether ketone)/poly(amide imide) polymer blends for proton conducting membrane

Poly(amide imide) (PAI) was synthesized using 1,2,4-benzenetricarboxylic anhydride (BTBA) and 4,4′-methylenebis(phenyl isocyanate) (MBPI). SPEEK/PAI blend membranes were prepared and investigated by NMR, GPC, FT-IR and AFM. The chemical structures of PAI and SPEEK were characterized by using NMR and FT-IR. The adsorption of the SPEEK/PAI blend membrane of water or methanol solution was also characterized. The significant swelling of the blend membrane in concentrated methanol solution was explained by the solubility parameter. The water diffusion coefficient (D_H2O) was related to the lambda value of the membrane. The SPEEK/PAI blend membrane had a lower proton conductivity and methanol permeability than Nafion. However, the relative selectivity (proton conductivity divided by methanol permeability) of the SPEEK/PAI 70/30 (w/w) blend membrane was 3.46 × 10⁴ S s cm⁻³, which is closed to that of Nafion (3.30 S s cm⁻³).     

Indium-mediated one-pot reductive conversion of nitroarenes to N-arylacetamides

N-Arylacetamides were prepared in excellent yields from nitroarenes in the presence of acetic anhydride, acetic acid and indium by a one-pot procedure.     

Simplistic modeling approach to heterogeneous dilute-acid hydrolysis of cellulose microcrystallites

The classic kinetic model for cellulose hydrolysis is often referred to as pseudo-homogeneous, a term revealing the insight that the process is actually heterogeneous. During the past 10–15 yr, the shortcomings of this model have been demonstrated in various studies and the interest in the heterogeneous aspects has increased. The present work presents a simplistic model in which the intrinsic, heterogeneous hydrolysis and transport rates are coupled by the assumption of a constant glucosidic surface concentration. The mechanisms affecting these two rates are largely unknown, but the model serves as a guideline for further exploration of the process.     

Determination of vanadium, molybdenum and tungsten in complex matrix samples by chelation ion chromatography and on-line detection with inductively coupled plasma mass spectrometry

In this work, two kinds of chelating resin, bis(2-aminoethylthio)methylated resin (BAETM) and γ-aminobutyrohydroxamate resin (γ-ABHX) were synthesized. Of these, the former has a hydrophobic skeleton, and the latter a hydrophilic skeleton. The functionalities of each were 0.91 and 2.21 mmol g⁻¹, respectively. The chelating behavior of these resins towards vanadium, molybdenum and tungsten as a function of pH was studied. To perform trace metals analysis in complex matrices, a hyphenated method-chelation ion chromatography (CIC) coupled on-line detection with inductively coupled plasma mass spectrometry (ICP-MS) was developed. With a BAETM resin column (5×0.4 cm i.d.) as the separator, a sample volume of 20 μl, nitric acid (pH 1.5) as the eluent and a flow rate of 1 ml min⁻¹, the detection limits for the determination of vanadium, molybdenum and tungsten were lower than 0.05 ng ml⁻¹and the linear ranges were up to 100 ng ml⁻¹ for each element. By increasing the injected sample volume to 250 μl, the resin concentrator improved the detection limit to 0.01 ng ml⁻¹. For the determination of these elements (5 ng ml⁻¹ for each) spiked in artificial sea water samples, γ-ABHX resin column (3×0.6 cm i.d.) demonstrated well resolved peak separation between the analytes and the matrix elements—calcium and magnesium, by using sodium nitrate (10 ml, 10⁻⁴ M) as the eliminator.     

Quaternized wood as sorbent for hexavalent chromium

The potential of quaternized wood (QW) chips in removing hexavalent chromium from synthetic solution and chrome waste under both batch and continuous-flow conditions was investigated. Sorption was found to be dependent on pH, metal concentration, and temperature. QW chips provide higher sorption capacity and wider pH range compared with untreated wood chips. The equilibrium data could be fitted into the Langmuir isotherm model, and maximum sorption capacities were calculated to be 27.03 and 25.77 mg/g in synthetic chromate solution and chrome waste, respectively. The presence of sulfate in high concentration appeared to suppress the uptake of chromium by QW chips. Column studies showed that bed depth influenced the breakthrough time greatly whereas flow rate of influent had little effect on its sorption on the column.     

The Effects of Methylene Blue and Oxygen Concentration on the Photoinactivation of Qβ Bacteriophage

Abstract— Concentration effects of methylene blue (MB) and oxygen on the photoinactivation rate of Qβ bacteriophage were examined. The effect of initial virus concentration was verified on the similar f2 phage. The inactivation rate, k , is an increasing function of MB and O₂ concentration and shows saturation with respect to MB concentration. Thus the results suggest that MB must adsorb to Qβ sites and oxygen must be present for photoinactivation to occur. The inactivation rate is independent of the initial number of phage particles present before inactivation, indicating that inactivation does not depend upon interaction among viral particles or on surface effects. The results indicate that at least two different viral phenotypes exist within the wild-type Qβ and f2 populations: one susceptible and the other resistant.     

Formation and Crystal Structure of Stable Five‐coordinate Diorgano Cobalt(III) Complexes

The mer‐octahedral complexes(2‐carbonyl)(4‐Me)(6‐tBu)phenolato[C,O]hydridotris(trimethylphosphine)cobalt(III) ( 1 ) or ‐(1‐carbonyl)(2‐oxo)(1,2‐diphenylethene)[C,O]hydridotris(trimethylphosphine)cobalt(III) ( 2 ) via formal insertion of propynoic acid ethyl ester into Co‐H functions afford pentacoordinate vinylcobalt(III) 3 and 4 , respectively, that are diamagnetic and attain a square pyramidal structure as exemplified by an X‐ray diffraction analysis of 3 .     

Investigation of the interaction between sodium dodecyl sulfate and cationic polymers

Aggregation properties of sodium dodecyl sulfate (SDS) on a cationic hydroxyethyl cellulose, Polyquaternium-10 (PQ-10), of low charge density were studied by potentiometric and pyrene fluorescence methods and compared with those of poly(diallyldimethylammomium chloride) (PDADMAC) of high charge density. The critical aggregation concentration (cac) was measured with the potentiometric method and further confirmed with the fluorescence method. The former was found to be more accurate. The value of the cac for the SDS/PQ-10 system was measured at 100, 200, and 400 ppm polymer and at 288.2,298.2, and 308.2 K. They showed almost the same cac value, 0.04 mmol dm-3. The I1/I3 value of the pyrene fluorescence spectrum in the SDS/PQ-10 system at higher SDS concentration was smaller than that in SDS/PDADMAC solution and much larger than that of water. From the binding isotherm by the potentiometric method, the free DS- concentration (Cf) and the bound DS- concentration (Cb) could be evaluated with ease over the SDS concentration range above the cac. The aggregation number of DS- aggregates for both the above polymers was evaluated from the fluorescence quenching method using the values of Cf and Cb from the potentiometric method. Because Cf in the SDS/PQ-10 system above the cac did not maintain a constant value contrary to that in the SDS/PDADMAC system but increased quite a lot, Cb should not be regarded as [SDS] - cac above the cac. The aggregation number in the SDS/PQ-10 system increased almost linearly with increasing total concentration of SDS, while that in the SDS/PDADMAC system reached a plateau. With increasing temperature, the aggregation number of the SDS/PDADMAC system decreased more rapidly than that of the SDS/PQ-10 system.     

Sphingosine mediates FTY720-induced apoptosis in LLC-PK1 cells

FTY720, a synthetic sphingoid base analog, was examined as a new sphingosine kinase inhibitor, which converts endogenous sphingosine into its phosphate form. With 20 microM of FTY720, sphingosine accumulated in the LLC-PK(1) cells in a time- and dose-dependent manner. The FTY720 treated cells showed a high concentration of fragmented DNA, a high caspase-3 like activity and TUNEL staining cells. It was also found that the sphingosine and sphinganine level increased in a time- and dose-dependent manner within 12 h after the FTY720 treatment. The sphingosine kinase activity was reduced by FTY720 as much as other sphingosine kinase inhibitors, N, N-dimethylsphingosine (DMS), dl-threo-dihydrosphingosine (DHS). The fragmented DNA content as a result of the 20 microM of FTY720 treatment and by 5 microM of the exogenously added BSA-sphingosine complex indicated typical apoptosis. Under similar conditions, the accumulated sphingosine concentration in all the cells was almost identical even though the sphingosine distribution inside the cells was somewhat different. These results indicate that the FTY720 induced apoptosis is associated with the inhibition of the sphingosine kinase activity and is strongly associated with the successive accumulation of sphingosine.