Comparison of the performance of graphitized carbon black and poly(styrene-divinylbenzene) cartridges for the determination of pesticides and industrial phosphates in environmental waters

The determination of polar and nonpolar organophosphorus compounds, triazines and their metabolites, molinate and chlorothalonil in 1 l water samples was investigated using off-line solid-phase extraction followed by gas chromatography with nitrogen-phosphorus and flame photometric detection. The ethylvinylbenzene-divinylbenzene copolymer (LiChrolut EN) and the commercial graphitized carbon black (GCB) of Envi-Carb were tested as solid-phase sorbents. The matrix effect was studied by extracting the compounds spiked in water samples of different types (Milli-Q, tap, salted tap water, river and sea water). The polymeric sorbent LiChrolut EN allowed the determination at low ng/l of all 40 compounds tested, except the very polar atrazine-desethyl-deisopropyl (DDA). Recoveries of compounds from the Envi-Carb sorbent are comparable to those obtained for LiChrolut EN with the exception of chlorothalonil and the more hydrophobic organophosphorus compounds (coumaphos, leptophos), which were strongly sorbed in the Envi-Carb cartridges. Envi-Carb, however, enabled the determination of DDA with a limit of detection of 14 ng/l.     

Molecular weight effect on the photoinduced birefringence and surface relief gratings formation of a methacrylate azopolymer

Samples of a methacrylic side-chain azopolymer were synthesized by a radical copolymerization of methyl-methacrylate with the methacrylic derivative of the commercial dye Disperse Red-13 (DR13). Copolymers with different molecular weight were obtained by varying the reaction time and the concentration of initiator. Samples with molecular weight averages (M_w) from 3 to 8 × 10⁴ g/mol and 1.4-1.7 polydispersity were obtained. The glass transition temperature of the samples increased linearly from the lower to the highest molecular weight. Optical quality cast films were prepared for all samples and photoinduced birefringence was successfully carried out in all samples as well as surface relief gratings could be inscribed in the cast films.     

Conversion electron and X-ray Mössbauer studies of boronized low-carbon steel under corrosion and oxidation conditions

Iron-boride layers on low-carbon steel were produced by thermochemical diffusion process. The surface interaction products: Fe₂B, FeB, FeB_x (x>1) and a solid solution of iron in boron were identified by surface Mössbauer spectroscopy (CEMS and XMS). Samples of original and boronized steel were subjected to corrosion process by immersion in HCl (0.1 N) solution for 150 h. While the steel sample was strongly corroded, none corrosion product was found on the boronized sample surface. However, significant changes in relative percentages of the various iron boride phases were detected. Also, samples of original and boronized steel were subjected to oxidation process by heat-treatment in air at 300°C for 8 h and 500°C for 4 h. At 300°C, while bulk Fe₃O₄ and -Fe₂O₃ were formed on the steel surface, none iron oxide was detected on the boronized surface. At 500° C, while only pure bulk -Fe₂O₃ was detected on the steel surface, a particle size distribution of-Fe₂O₃, with particle size of about 100 Å, was probably formed on the boronized surface, as evidenced by CEMS.     

Principal component analysis of the effects of wavefunction modification on the electrostatic potential of indole

The molecular electrostatic potential (MEP) of the indole molecule was calculated in a three‐dimensional grid in which the molecule was centered at the origin. To evaluate the dependence of MEP on the type of calculation, semiempirical, ab initio, and density functional theory methods with different basis sets were employed. The data matrix generated by these calculations was analyzed by principal component analysis (PCA). The appearance of outliers and the effect of wavefunction modifications such as the introduction of electron correlations and diffuse functions were highlighted by the use of PCA. The spatial localization of such effects around the molecule was possible from the loadings values associated with the graphical analysis of the grid points. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Direct determination of gallium on polyurethane foam by X-ray fluorescence

Gallium chloride is easily extracted from 6M HCl by comminuted polyether-type polyurethane foam. After the extraction step, the gallium absorbed by the PU foam can be quantitatively determined by X-ray fluorescence. A procedure for the direct determination of gallium absorbed by PU foam by XRFS is thus described. Gallium is determined at levels as low as 60 ng/ml (C(L)), with a calibration sensitivity of 424 cps ml/mug, within a linear range 0.1-2.30 mug/ml. The procedure investigated was successfully applied to determination of gallium in aluminum alloys, bauxite and industrial residue samples.     

Trace and major elements in serum of patients with chronic myelogenous leukemia

Summary Major and trace elements were determined in serum of patients with chronic myelogenous leukemia (CML) using total reflection X-ray fluorescence induced by synchrotron radiation (SRTXRF). CML affects 1 to 2 people per 100,000 and accounts for 7-20% cases of leukemia. It was possible to determine the concentrations of the following elements: P, S, Cl, K, Ca, Cr, Mn, Fe, Ni, Cu, Zn, Br and Rb. Using analysis of variance (ANOVA) it was observed that the contents of the P, S, Ca, Cr, Mn, Fe, Cu and Rb elements differed significantly at a = 0.05 between groups of healthy subjects and CML patients and also genders (males and females).     

Nickel determination in osteoblast-like cell culture medium by adsorptive cathodic stripping voltammetry with a mercury microelectrode

The purpose of this study is to investigate the influence of nickel, which is an alloying element in commonly used metallic biomaterials, on the biomaterials mineralization process. An electrochemical method was developed to quantify this metal ion in osteoblast-like cell culture medium (OST) by performing adsorptive cathodic stripping voltammetry (CSV) with dimethylglyoxime (DMG) at a mercury film microelectrode (MFM). The optimized analytical conditions and the square-wave CSV parameters for the analysis are: DMG concentration: 5.00 × 10⁻⁴ mol L⁻¹; ammonium chloride buffer: 0.10 mol L⁻¹ (pH 9.2); frequency: 50 Hz, amplitude 20 mV; step: 2 mV; adsorption time: 10 s, deposition potential: −0.70 V and reduction potential: −1.20 V. The limit of detection was 7.70 × 10⁻⁹ mol L⁻¹ for an adsorption time of 10 s. The results achieved by CSV using the MFM were compared to those obtained by atomic absorption spectrometry (AAS) to ensure the reliability of the electrochemical method. The mineralization process was evaluated by biochemical and histochemical assays.     

IAEA analytical quality assurance programmes to meet the present and future needs of developing countries

For many years the International Atomic Energy Agency (IAEA) has been promoting analytical quality assurance and quality control in its Member States with emphasis on measurands that are amenable to analysis by nuclear and related techniques, i.e. radionuclides, trace elements, and stable isotopes. This paper reviews briefly the rationale for some of these activities, particularly in relation to the needs of participants in developing countries arising out of co-ordinated research programmes, technical co-operation projects and global and regional networks. Emphasis is given to biological and environmental reference materials with a matrix of natural origin. Also described are some activities arising out of the requirements of ISO-25 and other relevant international quality standards.     

Immobilization of protein on ferromagnetic Dacron

Ferromagnetic Dacron (polyethyleneterephthalate) is proposed as a matrix to immobilize proteins covalently. Dacron in powder was magnetized by reacting ferrous (Fe+2) and ferric (Fe+3) ions with its hydrazide form at pH 8.3. Ferromagnetic hydrazide Dacron was converted to ferromagnetic azide Dacron and amyloglucosidase (E.C. 3.2.1.3) was covalently bound through the latter group. The catalytic property of the enzyme was preserved (8% of the specific activity estimated for the soluble enzyme) and all the magnetic amyloglucosidase Dacron derivative was recovered by using a magnetic field. No activity was detected in the supernatant.     

Alpha emitters from uranium mining in the environment

Uranium mining and milling activities usually generate an enhancement of radionuclide concentrations in the environment that may cause increased radiological exposure to mankind. For risk assessment and radiological protection of man and environment in these areas, usually, it is needed to implement radiological surveillance of water, soils, agricultural products, aerosols, and mining waste discharges as well. Radionuclides to be monitored in priority are alpha-emitting nuclides of the uranium natural series. Radioactivity analysis of materials from uranium mining areas of Portugal shows departure from secular radioactive equilibrium amongst uranium series radionuclides, thus rendering invalid the assumption of equilibrium and requiring the actual determination of each radionuclide. Radionuclide measurements performed with high resolution alphaspectrometry, as reported herein, produce accurate results on specific radionuclides that are essential in computing radiation doses to critical groups of the population.