A universal temperature controlled membrane interface for the analysis of volatile and semi-volatile organic compounds

A universal temperature controlled membrane interface (TCMI) has been constructed for hollow-fibre membranes. The membrane temperature is controllable in the range -70 to 250 degrees C using an electric heater and a flow of cooled nitrogen or helium gas. Volatile and semi-volatile organic compounds may be detected either by continuous diffusion across the membrane or by in-membrane pre-concentration followed by thermal desorption into the detector. The TCMI interface is demonstrated in combination with mass spectrometry and GC-MS, for the determination of VOCs and SVOCs in aqueous and air samples and for the on-line monitoring of a bioreactor.     

Kinetic investigation of the reactions of S-4-nitrophenyl 4-substituted thiobenzoates with secondary alicyclic amines in aqueous ethanol

The reactions of S-4-nitrophenyl 4-X-substituted thiobenzoates (X = H, Cl, and NO(2): 1, 2, and 3, respectively) with a series of secondary alicyclic amines (SAA) were subjected to a kinetic investigation in 44 wt % ethanol-water, at 25.0 degrees C and an ionic strength of 0.2 M (KCl). The reactions were followed spectrophotometrically by monitoring the release of 4-nitrobenzenethiolate anion at 420-425 nm. Under excess amine, pseudo-first-order rate constants (k(obsd)) are obtained for all reactions. The plots of k(obsd) vs [SAA] at constant pH are linear with the slope (k(N)) independent of pH. The statistically corrected Br?nsted-type plots (log k(N)/q vs pK(a) + log p/q) for the reactions of 1 and 2 are nonlinear with slopes at high pK(a), beta(1) = 0.27 and 0.10, respectively, and slopes at low pK(a), beta(2) = 0.86 and 0.84, respectively. The Br?nsted curvature is centered at pK(a) (pK(a)(0)) 10.0 and 10.4, respectively. The reactions of SAA with 3 exhibit a linear Br?nsted-type plot of slope 0.81. These results are consistent with a stepwise mechanism, through a zwitterionic tetrahedral intermediate (T(+/-)). For the reactions of 1 and 2, there is a change in rate-determining step with amine basicity, from T(+/-) breakdown to products at low pK(a), to T(+/-) formation at high pK(a). For the reactions of 3, breakdown to products of T(+/-) is rate limiting for all the SAA series (pK(a)(0) > 11). The increasing pK(a)(0) value as the substituent in the acyl group becomes more electron withdrawing is attributed to an increasing nucleofugality of SAA from T(+/-). The greater pK(a)(0) value for the reactions of SAA with 1, relative to that found in the pyridinolysis of 2,4-dinitrophenyl benzoate (pK(a)(0) = 9.5), is explained by the greater nucleofugality from T(+/-) of the former amines, compared to isobasic pyridines, and the greater leaving ability from T(+/-) of 2,4-dinitrophenoxide relative to 4-nitrobenzenethiolate.     

A systematic study of bovine serum albumin (BSA) and sodium dodecyl sulfate (SDS) interactions by surface tension and small angle X-ray scattering

Classical parameters obtained from surface tension technique coupled to small angle X-ray scattering (SAXS) measurements gave support to investigate conformational changes in the bovine serum albumin (BSA)-sodium dodecyl sulfate (SDS) complexes, as well as the size of the micelle-like clusters distributed along the polypeptide chain. The studied systems were composed of 1 wt% of BSA in the absence and presence of increasing SDS molar concentration up to 80 mM, under experimental conditions of low ionic strength and pH 5.40. At SDS concentrations below the critical aggregation concentration (cac) of 2.2 mM, SAXS results indicate that the detergent does not modify the native protein conformation. However, the beginning of protein unfolding, evidenced by SAXS through an increase in the values of radius of gyration Rg and protein maximum dimension Dmax, is coincident with the onset of SDS cooperative binding to BSA identified by the first breakpoint in the surface tension-SDS profile. Further SDS addition leads to the formation of micelle-like aggregates randomly distributed along the unfolded polypeptide chain, consistent to a necklace and bead model. The SAXS data also demonstrate that the SDS micelles grow in size up to 50 mM detergent. At 50 mM surfactant, the micelles stop growing. This concentration is near the BSA saturation binding by SDS measured by dialyzes and indicated by the second breakpoint in surface tension-SDS profile. The SAXS and surface tension data are also consistent with the formation of free micelles in equilibrium with BSA-SDS complexes for surfactant amount above the saturation.     

Kinetics and mechanism of the aminolysis of O-aryl S-methyl thiocarbonates

[reaction: see text] The reactions of secondary alicyclic (SA) amines and quinuclidines (QUI) with 4-nitrophenyl and 2,4-dinitrophenyl S-methyl thiocarbonates (1 and 2, respectively) and those of SA amines with 2,3,4,5,6-pentafluorophenyl S-methyl thiocarbonate (3) are subjected to a kinetic study in aqueous solution, at 25.0 degrees C, and an ionic strength of 0.2 M (KCl). The reactions of thiocarbonates 1, 2, and 3 were followed spectrophotometrically at 400, 360, and 220 nm, respectively. Under amine excess, pseudo-first-order rate coefficients (k(obsd)) are found. Plots of k(obsd) vs amine concentration at constant pH are linear, with the slope (kN) independent of pH. The Br?nsted-type plots (log kN vs pKa of aminium ions) are linear for all the reactions, with slopes beta = 0.9 for those of 1 with SA amines and QUI, beta = 0.36 and 0.57 for the reactions of 2 with SA amines and QUI, respectively, and beta = 0.39 for the reactions of SA amines with 3. The magnitude of the slopes indicates that both aminolyses of 1 are governed by stepwise mechanisms, through a zwitterionic tetrahedral intermediate (T+/-), where expulsion of the nucleofuge from T+/- is the rate-determining step. The values of the Br?nsted slopes found for the aminolyses of thiocarbonates 2 and 3 suggest that these reactions are concerted. By comparison of the reactions under investigation between them and with similar aminolyses, the following conclusions arise: (i) Thiocarbonate 2 is more reactive than 1 toward the two amine series. (ii) The change of the nonleaving group from MeO in 4-nitrophenyl methyl carbonate to MeS in thiocarbonate 1 results in lower kN values. (iii) The greater reactivity of this carbonate than thiocarbonate 1 is attributed to steric hindrance of the MeS group, compared to MeO toward amine attack. (iv) The change of a pyridine to an isobasic SA amine or QUI destabilizes the T+/- intermediate formed in the aminolyses of 2. (v) The change of 4-nitrophenoxy to 2,3,4,5,6-pentafluorphenoxy or 2,4-dinitrophenoxy as the leaving group destabilizes the tetrahedral intermediate formed in the reactions with SA amines, changing the mechanism from a stepwise process to a concerted reaction.     

Selective extraction of benzoic acid from landfill leachate by solid-phase extraction and ion-exchange chromatography

In this work a simple method was described for selective extraction of benzoic acid from landfill leachate samples. The samples were submitted to solid-phase extraction (SPE) with XAD-4 resin as the stationary phase and ion-exchange chromatography (IEC) using the ion-exchange resin Amberlyst A-27. The instrumental analysis was performed by gas chromatography with mass spectrometric detection (GC-MSD). Benzoic acid was isolated, identified and quantified. The extraction process is rapid, simple and of low cost. It was also environmental friendly, that is, it was used a minimum amounts of hazardous organic solvents and produced also minimum quantities of residues.     

Kinetics and mechanism of the reactions of S-2,4-dinitrophenyl 4-substituted thiobenzoates with secondary alicyclic amines

[reaction: see text] The title reactions, in 44 wt % ethanol-water at 25.0 degrees C, exhibit slightly curved Br?nsted-type plots (log kN versus pKa of amines) with slopes beta1 = 0.1-0.44 (at high pKa) and beta2 ca. 0.7 (at low pKa). The magnitude of some of these slopes, together with the fact that the curvature center (pKa(0) = 9.5-10.8) does not change with the electronic effects of the benzoyl substituent, suggests that these reactions are not stepwise, but concerted.     

Molecular-level control of the photoluminescence from PPV nanostructured films

The fabrication of varied molecular architectures in layer-by-layer (LbL) films is exploited to control the photoluminescence (PL) of poly(p-phenylene vinylene) (PPV) in an unprecedented way. This was achieved by controlling the F?rster energy transfer between PPV layers (donors) and layers of a commercial azodye, Brilliant Yellow (BY) (acceptors). Energy transfer was controlled by inserting spacer layers of inert polymers between PPV and BY layers and by photoaligning the BY molecules via trans-cis-trans isomerization. The PPV/BY LbL films displayed polarized PL whose intensity could be varied almost continuously by changing the time of photoalignment, which was carried out by impinging a linearly polarized laser light simultaneously to the PL experiments. For PPV/BY films with no spacer layers, PL was completely quenched, but its intensity increased with the number of spacing layers. Further increase in PL was obtained by photoaligning the BY molecules perpendicularly to the PPV molecules. This minimizes energy transfer, since F?rster processes are directional, dipole-dependent resonant transfers. Energy transfer is also controlled by imparting a preferential orientation of the PPV chains on PPV/BY LbL films deposited onto flexible Teflon substrates that may be stretched.     

Bond dissociation energies for radical dimers derived from highly stabilized carbon-centered radicals

[reaction: see text] The temperature dependence of the dissociation of dimers formed from highly stabilized carbon-centered radicals has been examined. Analysis of the data yields the bond dissociation energy (BDE) for the central head-to-head C-C bond in these compounds. For example, for the dimer derived from 3-phenyl-2-coumaranone, BDE is 23.6 kcal/mol and the C-C bond length 1.596 A, a rather long value for a sigma bond.     

Molybdenum determination in iron matrices by ICP-AES after separation and preconcentration using polyurethane foam

A procedure is proposed for the separation and determination of molybdenum in iron matrices by a batch process. It is based on the solid-phase extraction of the molybdenum(V) ion as thiocyanate complex on polyurethane (PU) foam. The extraction parameters were optimized. Using 0.20 mol L-1 hydrochloric acid, a thiocyanate concentration of 0.10 mol L-1, 100 mg of polyurethane foam and shaking time of 10 min, molybdenum (5-400 micrograms) can be separated and preconcentrated from large amounts of iron (10 mg). Desorption was carried out instantaneously by conc. nitric acid or acetone. Distribution coefficients, sorption capacity of the PU foam and coefficients of variation were also evaluated. The effect of some ions on the separation procedure was assessed. Iron(III) should be reduced to iron(II). The proposed procedure was used to determine molybdenum in standard iron matrices such as steel and pure iron. The achieved results did not show significant differences with certified values.     

Contrasting behavior in azide pyrolyses: an investigation of the thermal decompositions of methyl azidoformate, ethyl azidoformate and 2-azido-N, N-dimethylacetamide by ultraviolet photoelectron spectroscopy and matrix isolation infrared spectroscopy

The thermal decompositions of methyl azidoformate (N3COOMe), ethyl azidoformate (N3COOEt) and 2-azido-N,N-dimethylacetamide (N3CH2CONMe2) have been studied by matrix isolation infrared spectroscopy and real-time ultraviolet photoelectron spectroscopy. N2 appears as an initial pyrolysis product in all systems, and the principal interest lies in the fate of the accompanying organic fragment. For methyl azidoformate, four accompanying products were observed: HNCO, H2CO, CH2NH and CO2, and these are believed to arise as a result of two competing decomposition routes of a four-membered cyclic intermediate. Ethyl azidoformate pyrolysis yields four corresponding products: HNCO, MeCHO, MeCHNH and CO2, together with the five-membered-ring compound 2-oxazolidone. In contrast, the initial pyrolysis of 2-azido-N,N-dimethyl acetamide, yields the novel imine intermediate Me2NCOCH=NH, which subsequently decomposes into dimethyl formamide (HCONMe2), CO, Me2NH and HCN. This intermediate was detected by matrix isolation IR spectroscopy, and its identity confirmed both by a molecular orbital calculation of its IR spectrum, and by the temperature dependence and distribution of products in the PES and IR studies. Mechanisms are proposed for the formation and decomposition of all the products observed in these three systems, based on the experimental evidence and the results of supporting molecular orbital calculations.