A comparative study of distortion-product-otoacoustic-emission fine structure in human newborns and adults with normal hearing

Distortion product otoacoustic emissions (DPOAE) measured in human newborns are not adult-like. More than a decade of work from various investigators has created a well-developed body of evidence describing these differences but the putative anatomy or physiology has only been partially explained. Recently, Abdala and Keefe [J. Acoust. Soc. Am. 120, 3832-3842 (2006)] have identified outer and middle ear immaturities that at least partially describe the differences observed between newborn and adult input-output functions and suppression tuning curves. DPOAE fine structure characteristics and their maturation have not been examined to any extent in the literature. Fine structure characteristics in two groups of ten newborns and young adults with normal hearing sensitivity are compared here. Consistent with previous reports, the newborns show higher DPOAE levels; greater fine structure depth and wider fine structure spacing is also observed in the newborns. Differences in fine structure morphology are also observed between the two age groups. While some of these findings are attributable to an immature outer and middle ear system in the newborns, it is argued that some observed differences in fine structure characteristics might be due to remnant immaturities in passive motion of the basilar membrane in the newborn cochlea.     

Distortion product otoacoustic emission suppression tuning and acoustic admittance in human infants: birth through 6 months

Previous work has reported non-adultlike distortion product otoacoustic emission (DPOAE) suppression in human newborns at f2=6000 Hz, indicating an immaturity in peripheral auditory function. In this study, DPOAE suppression tuning curves (STCs) were recorded as a measure of cochlear function and acoustic admittance/reflectance (YR) in the ear canal recorded as a measure of middle-ear function, in the same 20 infants at birth and through 6 months of age. DPOAE STCs changed little from birth through 6 months, showing excessively narrow and sharp tuning throughout the test period. In contrast, several middle-ear indices at corresponding frequencies shifted systematically with increasing age, although they also remained non-adultlike at 6 months. Linear correlations were conducted between YR and DPOAE suppression features. Only two correlations out of 76 were significant, and all but three YR variables accounted for <10% of the variance in DPOAE suppression tuning. The strongest correlation was noted between admittance phase at 5700 Hz and STC tip-to-tail (R=0.49). The association between middle-ear variables and DPOAE suppression may be stronger during other developmental time periods. Study of older infants and children is needed to fully define postnatal immaturity of human peripheral auditory function.     

Unraveling the Degradation Mechanism of Purine Nucleotides Photosensitized by Pterins: The Role of Charge‐Transfer Steps

Photosensitized reactions contribute to the development of skin cancer and are used in many applications. Photosensitizers can act through different mechanisms. It is currently accepted that if the photosensitizer generates singlet molecular oxygen (¹O₂) upon irradiation, the target molecule can undergo oxidation by this reactive oxygen species and the reaction needs dissolved O₂ to proceed, therefore the reaction is classified as ¹O₂‐mediated oxidation (type II mechanism). However, this assumption is not always correct, and as an example, a study on the degradation of 2′‐deoxyguanosine 5′‐monophosphate photosensitized by pterin is presented. A general mechanism is proposed to explain how the degradation of biological targets, such as nucleotides, photosensitized by pterins, naturally occurring ¹O₂ photosensitizers, takes place through an electron‐transfer‐initiated process (type I mechanism), whereas the contribution of the ¹O₂‐mediated oxidation is almost negligible.     

Influence of the Solvent on the “Casting” Methodology for MWCNT‐Modified Glassy Carbon and Platinum Electrodes

The choice of electrode material and surface preparation method are usually dictated by the suitability of the electrode to observe an electrochemical parameter, such as heterogeneous electron transfer rate, surface coverage, or redox potential. Thus, the glassy carbon (GC) and platinum (Pt) electrodes were modified with multiwalled carbon nanotubes (MWCNT) by direct “casting” modification using nine different aliquots of solvents. After drying at room temperature, the modified electrode showed distinct redox peaks corresponding to ferrocyanide oxidation/reduction. Using chemometrics, the cyclic voltammograms with higher current intensity were obtained for those in which ethanol, water and acetone as dispersing agents were used for GCE and dimethylformamide, water and acetone for Pt electrode modification.     

Surface composition of PdCuAu ternary alloys: a combined LEIS and XPS study

PdCuAu ternary alloy samples with different composition were synthesized on top of ZrO₂‐modified porous stainless steel disks by the sequential electroless deposition technique. The structure, morphology and bulk composition of the samples were characterized by X‐ray diffraction (XRD), scanning electron microscopy and energy dispersive X‐ray spectroscopy (EDX). Complete alloy formation with a pure fcc phase for the Pd₇₁Cu₂₆Au₃, Pd₇₀Cu₂₅Au₅ and Pd₆₇Cu₂₄Au₉ samples and a bcc structure for the Pd₆₂Cu₃₆Au₂ and Pd₆₀Cu₃₇Au₃ samples were obtained upon annealing at 500 °C for 120 h as revealed by XRD. A combination of low‐energy ion scattering (LEIS) and X‐ray photoelectron spectroscopy (XPS) was used to investigate the surface properties of the PdCuAu alloys. XPS results confirmed alloy formation under the annealing conditions. XPS analysis also revealed that the near‐surface regions of the alloys became enriched in Pd with respect to the bulk composition determined by EDX. In contrast, LEIS and angle‐resolved XPS analyses showed that the top‐most surface layers in all samples were copper‐rich compared with the bulk composition. This high Cu surface concentration could impart resistance to bulk sulfide formation to the PdCuAu alloy membranes. Copyright © 2015 John Wiley & Sons, Ltd.     

Potential of prodendronic polyamines with modulated segmental charge density as novel coating for fast and efficient analysis of peptides and basic proteins by CE and CE‐MS

In this work, the suitability of a new polymer family has been investigated as capillary coatings for the analysis of peptides and basic proteins by CE. This polymer family has been designed to minimize or completely prevent protein–capillary wall interactions and to modify the EOF. These coating materials are linear polymeric chains bearing as side cationizable moiety a dentronic triamine derived from N,N,N’,N’‐tetraethyldiethylenetriamine (TEDETA), which is linked to the backbone through a spacer (unit labeled as TEDETAMA). Four different polymers have been prepared and evaluated: a homopolymer which comprised only of those cationizable repetitive units of TEDETAMA, and three copolymers that randomly incorporate TEDETAMA together with neutral hydrosoluble units of N‐(2‐hydroxypropyl) methacrylamide (HPMA) at different molar percentages (25:75, 50:50 and 75:25). It has been demonstrated that the composition of the copolymers influences the EOF and therefore the separation of the investigated biopolymers. Among the novel polymers studied, poly‐(TEDETAMA‐co‐HPMA) 50:50 copolymer was successfully applied as coating material of the inner capillary surface in CE‐UV and CE‐MS, providing EOF reversing together with fast and efficient baseline separation of peptides and basic proteins. Finally, the feasibility of the polymer‐coated capillary was shown through the analysis of lysozyme in a cheese sample.     

A Safety Strategy for Producing Poly(Acrylic Acid) of Low Molar Mass

The synthesis of poly(acrylic acid) (PAA) of low molar mass under safe conditions is difficult due to the high polymerization rate of acrylic acid (AA) and the fast heat generation. The aqueous‐solution “semibatch” polymerization of non‐ionized AA in almost starved conditions involves high initiator loads when low molar masses are required. This article proposes the simultaneous feeding of AA and nonconventional chain transfer agents (CTA) as a strategy aimed at controlling both the molar masses and the generated heat rate. Three CTAs are investigated: 2‐mercaptoethanol, thioglycolic acid, and isopropyl alcohol. Even when PAA of relatively low molar mass can be produced by adequately selecting the flow rates and concentrations of both AA and CTA, it is found that the nature of CTA can have a significant effect on the polymerizations kinetics. The mechanisms responsible for these effects are discussed with the help of a representative mathematical model.

     

Symmetry and the golden ratio in the analysis of a regular pentagon

The regular pentagon had a symbolic meaning in the Pythagorean and Platonic philosophies and a subsequent important role in Western thought, appearing also in arts and architecture. A property of regular pentagons, which was probably discovered by the Pythagoreans, is that the ratio between the diagonal and the side of these pentagons is equal to the golden ratio. Here, we will study some relations existing between a regular pentagon and this ratio. First, we will focus on the group of fivefold rotational symmetry, to find the position in the complex plane of the vertices of this geometric figure. Then, we will propose an analytic method to solve the same problem based on the Cartesian coordinates, a method where we find the golden ratio without any specific geometric consideration. This study shows a comparison of the use of complex numbers, symmetries and analytic methods, applied to a subject which can be interesting for general education in mathematics. In fact, the proposed approach can convey and link several concepts, requiring only a general pre-college education, showing at the same time the richness that mathematics can offer in solving geometric problems.     

Analysis of chiral amino acids in cerebrospinal fluid samples linked to different stages of Alzheimer disease

Chiral micellar electrokinetic chromatography with laser-induced fluorescence detection (chiral-MEKC-LIF) was used to investigate D- and L-amino acid contents in cerebrospinal fluid (CSF) samples related to different Alzheimer disease (AD) stages. CSF samples were taken from (i) control subjects (S1 pool), (ii) subjects showing a mild cognitive impairment who remained stable (S2 pool), (iii) subjects showing an mild cognitive impairment that progressed to AD (S3 pool) and (iv) subjects diagnosed with AD (S4 pool). The optimized procedure only needed 10 μL of CSF and it included sample cleaning, derivatization with FITC and chiral-MEKC-LIF separation. Eighteen standard amino acids were baseline separated with efficiencies up to 703,000 plates/m, high sensitivity (LODs in the nM range) and good resolution (values ranging from 2.6 to 9.5). Using this method, L-Arg, L-Leu, L-Gln, γ-aminobutyric acid, L-Ser, D-Ser, L-Ala, Gly, L-Lys, L-Glu and L-Asp were detected in all the CSF samples. S3 and S4 samples (i.e. AD subjects) showed significant lower amounts of L-Arg L-Lys, L-Glu and L-Asp compared to the non-AD S1 and S2 samples, showing in the S4 group the lowest amounts of L-Arg L-Lys, L-Glu and L-Asp. Moreover, γ-aminobutyric acid was significantly higher in AD subjects with the highest amount also found for S4. No significant differences were observed for the rest of amino acids including D-Ser. Based on the obtained chiral-MEKC-LIF data, it was possible to correctly classify all the samples into the four groups. These results demonstrate that the use of enantioselective procedures as the one developed in this work can provide some new light on the investigations of AD, including the discovery of new biomarkers related to different stages of AD.