Adsorption-penetration studies of glucose oxidase into phospholipid monolayers at the 1,2-dichloroethane/water interface.

The interaction between glucose oxidase (GOx) and phospholipid monolayers is studied at the 1,2-dichloroethane/water interface by electrochemical impedance spectroscopy. Electrochemical experiments show that the presence of GOx induces changes in the capacitance curves at both negative and positive potentials, which are successfully explained by a theoretical model based on the solution of the Poisson-Boltzmann equation. These changes are ascribed to a reduced partition coefficient of GOx and an increase of the permittivity of the lipid hydrocarbon domain. Our results show that the presence of lipid molecules enhances the adsorption of GOx molecules at the liquid/liquid interface. At low lipid concentrations, the adsorption of GOx is probably the first step preceding its penetration into the lipid monolayer. The experimental results indicate that GOx penetrates better and forms more stable monolayers for lipids with longer hydrophobic tails. At high GOx concentrations, the formation of multilayers is observed. The phenomenon described here is strongly dependent on 1) the GOx and lipid concentrations, 2) the nature of the lipid, and 3) the potential drop across the interface.     

New aspects of the electroadsorption of ethyl xanthate on copper electrodes

The interaction of the ethyl xanthate (EX) anion with a copper electrode in a borate buffer solution, pH 9.2, has been investigated by cyclic voltammetry (CV), electrochemical quartz crystal microbalance (EQCM), electrochemical impedance spectroscopy (EIS), and measurements of contact angle (CA) under controlled potential. The results obtained allow establishing that, in the potential range from -0.80 and -0.60 V, two parallel reactions were characterized. These reactions were the ethyl xanthate electroadsorption and the hydrogen evolution reaction (HER). This last reaction has not been described by previous authors. Besides, the EIS measurements show that the mechanism of the HER on copper electrodes is not affected by the presence of a ethyl xanthate species. The EQCM study shows that in the electrodesorption process the departure of each ethyl xanthate species from the copper electrode is accompanied with the simultaneous entry of four to five water molecules. This fact is in accordance with the number of copper atoms involved in the adsorption of one ethyl xanthate species.     

Comparison of 17beta-estradiol structures from x-ray diffraction and solution NMR

The NMR-derived structure of estrogen (17beta-estradiol, E2), the drug of choice for postmenopausal women, was compared with a recent literature crystal x-ray structure of Fab-bound E2. 1H and 13C NMR spectra of E2 were acquired in DMSO-d6. Assignments were obtained from an analysis of DQF-COSY, TOCSY, HETCOR, HMQC and HMBC 2D NMR spectra. The 1H and 13C NMR assignments are the first reported for E2 in DMSO-d6. Two solution structures, S1 and S2, were obtained with molecular modeling using NOE constraints. S1 overlaps with the crystal structure for all rings. S2 shows prominent differences in the C-ring (C9--C11--C12--C13) segment, which deviates from a chair conformation, and excellent overlap in the A-, B- and D-rings of E2. The C-ring in S2 adopts a boat conformation as opposed to a chair conformation in the x-ray and S1 structures. The S2 structure is about 6 degrees more twisted than the bound x-ray and S1 models. The S1, S2 and x-ray structures had ring bowing values of 10.1 +/- 0.3, 11 +/- 1 and 10.37 degrees , respectively. Of the 100 solution conformers generated, 83 had S1 conformation and 17 had S2 conformation, with average internal energies of 112 +/- 2 and 141 +/- 2 kcal mol(-1), respectively. The 100 S1- and S2- derived conformers showed a r.m.s.d. of 0.72 A for all atoms. The x-ray, S1 and S2 C18--O17 distances were 2.93, 2.92 +/- 0.01 and 2.93 +/- 0.01 A, respectively, and the O3--O17 distances were 11.06, 11.18 +/- 0.12, and 10.89 +/- 0.05 A, respectively.     

A mew method of synthesis of 1,2,3,4-telrahydro-5H-5-oxo-1,4-benzodiazepines

A new one-step facile method for the synthesis of 1,12,3,4-tetrahydro5H-5-oxo-1,4-benzo-diuzepines is described. The method involves the addition of methyl anlhranilates to elhyl-enimine followed by intramolecular cyclizalion of the resulting intermediate compounds. Another attempted method starting from β-anilinoethylisocyanales is also described.     

Reversible colorimetric probes for mercury sensing

The selectivity and sensitivity of two colorimetric sensors based on the ruthenium complexes N719 [bis(2,2'-bipyridyl-4,4'-dicarboxylate)ruthenium(II) bis(tetrabutylammonium) bis(thiocyanate)] and N749 [(2,2':6',2' '-terpyridine-4,4',4' '-tricarboxylate)ruthenium(II) tris(tetrabutylammonium) tris(isothiocyanate)] are described. It was found that mercury ions coordinate reversibly to the sulfur atom of the dyes' NCS groups. This interaction induces a color change in the dyes at submicromolar concentrations of mercury. Furthermore, the color change of these dyes is selective for mercury(II) when compared with other ions such as lead(II), cadmium(II), zinc(II), or iron(II). The detection limit for mercury(II) ions--using UV-vis spectroscopy--in homogeneous aqueous solutions is estimated to be approximately 20 ppb for N719 and approximately 150 ppb for N749. Moreover, the sensor molecules can be adsorbed onto high-surface-area mesoporous metal oxide films, allowing reversible heterogeneous sensing of mercury ions in aqueous solution. The results shown herein have important implications in the development of new reversible colorimetric sensors for the fast, easy, and selective detection and monitoring of mercuric ions in aqueous solutions.     

Optimization of solid-phase clean-up prior to liquid chromatographic analysis of ochratoxin A in roasted coffee

An extraction and clean-up method for ochratoxin A (OA) in roasted coffee has been developed and the HPLC method optimized. An interfering compound with a similar retention time as OA was adsorbed by the aminopropyl (NH2) material at < or = 5% NaHCO3. Residual OA on the column was recovered by washing with the extraction solution followed with methanol. Fractions were mixed together for further clean-up with Ochratest immunoaffinity columns (IACs). Analysis by HPLC resulted in a well resolved OA peak and reduction in matrix interferences. Recoveries ranged from 72 to 84% and the detection limit was 1 ng/g.     

Reaction products of W(CO)(6) with formamidines; electronic structure of a W(2)(mu-CO)(2) core with unsymmetric bridging carbonyls

Reactions of W(CO)(6) with formamidines contrast with those of Mo(CO)(6) and Cr(CO)(6) in that the former do not yield quadruply bonded dimetal species. From the reaction of W(CO)(6) with HDAniF (HDAniF = N,N'-di-p-anisylformamidine), several new ditungsten carbonyl compounds (W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(2) (1), W(2)(mu-CO)(2)(mu-DAniF)(2)(eta(2)-DAniF)(eta(2)-CH(2)DAniF) (2), and W(2)(mu-CO)(mu-CNC(6)H(4)OCH(3))(mu-DAniF)(2)(eta(2)-DAniF)(2) (3)) have been isolated and fully characterized. In 2, CH(2)DAniF represents a DAniF ligand in which a methylene group has been added to one of the nitrogen atoms. This ligand binds to the tungsten atom using a nitrogen and a carbon atom. Compound 1 has a tungsten-tungsten bond distance of 2.476(1) A and a planar W(2)(mu-CO)(2) core structure which has C(2)(h)() symmetry with short and long W-C bond distances (1.99(1) and 2.28(1) A, respectively). DFT calculations on a model of 1 indicate that (a) the C(2)(h)() instead of D(2)(h)() symmetry of the ditungsten core may be attributed to W --> CO pi back-bonding interactions and (b) the bond between the tungsten atoms may be formulated as a double bond. The new tetragonal paddlewheel compound W(2)(DAniF)(4) (4) and the edge-sharing bioctahedron W(2)(mu-O)(mu-NC(6)H(3)Cl(2))(mu-D(Cl)PhF)(2)(eta(2)-D(Cl)PhF)(2) (5) (D(Cl)PhF = N,N'-di-(3,5-dichlorophenyl)formamidinate) have also been prepared.     

Intramolecular fluorescence quenching in luminescent copolymers containing fluorenone and fluorene units: a direct measurement of intrachain exciton hopping rate

The quenching process of fluorescence emission in polyfluorene (PF) due to the presence of intramolecular 9-fluorenone (9 FL) moieties is studied in dilute toluene solution as a function of 9 FL content in eight copolymers containing both fluorene and fluorenone units (PF/FL(x)). The absorption spectrum of PF/FL(x) copolymers clearly shows a new absorption band, redshifted relatively to the PF and 9-fluorenone absorption, which increases in intensity when the fluorenone fraction increases and also decreases with solvent polarity. Fluorescence emission spectra of PF/FL(x) show that this redshifted and unstructured emission does not coincide with the 9-fluorenone emission and, with increasing solvent polarity, it further redshifts and decreases in intensity. An isoemissive point is clearly observed on the fluorescence emission spectra of PF/FL(x) as a function of fluorenone content, showing that the new emission band is formed at the expense of PF. We propose the formation of an intramolecular charge transfer complex (ICTC) between PF units and 9-fluorenone to explain the appearance of the new emission band. Global analysis of time resolved fluorescence decays collected at 415 nm (PF emission) and 580 nm (the ICTC emission) show that three exponentials are generally needed to achieve excellent fits. Two of the components (420 ps and 6.5 ns) are independent of 9-fluorenone fraction. A further fast component is strongly dependent on fluorenone fraction and ranges between 280 and 70 ps. This component appears as a decay time at 415 nm and as a rise time at 580 nm and is ascribed to the migration of exciton to quenching sites (formation of intramolecular CT complex or exciton ionization at CT complex). A kinetic mechanism involving three different kinetic species, quenched PF units kinetically coupled with the ICTC complex, and unquenched PF units is proposed to explain the experimental data and the quenching rate constant is obtained, k(1) congruent with 10(11) s(-1). This is an experimental measurement of the intrachain exciton hopping rate.     

Regio- and enantioselective iridium-catalyzed intermolecular allylic etherification of achiral allylic carbonates with phenoxides

An enantioselective and regioselective iridium-catalyzed allylic etherification is described. The reaction of sodium and lithium aryloxides with achiral (E)-cinnamyl and terminal aliphatic allylic electrophiles in the presence of 2 mol % of an iridium-phosphoramidite complex provides chiral allylic aryl ethers in high yields and excellent levels of regio- and enantioselectivity. Lithium aryloxides containing a single substituent at an ortho, meta, or para position as well as sterically hindered phenoxides were tolerated. Reactions in THF displayed the most suitable balance of rate, regio-, and enantioselectivity. High ee's were also observed for the products from the reaction of alkyl (E)-allylic carbonates.     

Calculation of Kinetic Parameters for Crystallization Processes

In this work, kinetic data of crystallization processes have been determined by measurement of the intensities of reflection of X-ray diffraction spectra and modeled using the Avrami-Eroféev and Jander expressions. We have created a simple Microsoft Excel spreadsheet that allows students to calculate the kinetic data. Students will be able to calculate the kinetic parameters of any crystallization process, for example, hydrothermal crystallization of catalytic materials like zeolites. The possibility of using the spreadsheet with different models or expressions and discriminating among them is also validated by comparing the model results with experimental data (differential thermal analyses, DTA) from papers available in the recent literature.