Rapid determination of orotic acid in urine by a fast liquid chromatography/tandem mass spectrometric method

Quantification of orotic acid (uracil-6-carboxylic acid) in urine is an important tool to diagnose some inherited diseases, such as urea cycle disorder (OTCD) and hereditary orotic aciduria. New rapid analytical methods are necessary to provide high-throughput orotic acid analyses. A new analytical method has been developed for the rapid analysis of orotic acid in urine by liquid chromatography coupled with ion spray tandem mass spectrometry (LC/MS/MS). After a sample dilution 1:20, the analysis was performed in the selected reaction monitoring mode in which orotic acid was detected through the transition m/z 155 to 111. The retention time was 3.9 min in a 4.5-min analysis. Daily calibration between 0.5-5.0 micromol/L of orotic acid, corresponding to 10-100 micromol/L in urine before the 1:20 dilution, offered consistent linearity and reproducibility. Interassay coefficient of variance (c.v.) was 4.97% at a mean concentration of 10.99 micromol/L. The sensitivity and specificity of tandem mass spectrometry permitted a high volume of analyses of orotic acid. The sample preparation is simple, inexpensive and not time demanding.     

High-density lipoproteins contribute to the alpha-1-globulin zone in capillary electrophoresis of human serum proteins

Alpha-1-antitrypsin (AAT) and alpha-1-acid glycoprotein (AAG) are reported to be the main proteins contributing to the alpha-1-globulin capillary zone electrophoresis (CZE) zone, but the sum (AAT + AAG) showed lower than the alpha-1-globulin. We investigated the role of high-density lipoprotein (HDL), an additional protein migrating in the alpha-1-globulin zone, as a possible cause for such a gap. In a set of 98 sera we measured the alpha-1-globulin with a dedicated clinical capillary electrophoresis system, and AAT, AAG and apolipoprotein A-1 (ApoA) by immunonephelometry. The alpha-1-globulin were consistently higher than the sum (AAT + AAG), by (mean value +/- standard deviation) 1.70 +/- 0.88 g/L in 49 sera with low ApoA, and by 3.59 +/- 0.75 g/L in 49 sera with high ApoA. Corresponding figures in the comparison alpha-1-globulin/(AAT + AAG + ApoA) were reduced to 1.08 +/- 0.77 g/L and 1.67 +/- 0.70 g/L. It is concluded that HDL significantly contribute to the CZE alpha-1-globulin zone, but do not completely explain the differences between the electrophoretic and the immunochemical measurements. However, CZE alpha-1-globulin measurements give information about increases of the two major acute phase proteins comparable to specific protein measurements.     

Analogues of Sialic Acids as Potential Sialidase Inhibitors Synthesis of 2-C-Hydroxymethyl Derivatives of N-Acetyl-6-amino-2,6-dideoxy-neuraminic Acid

The intramolecular cycloaddition of the previously described azidoalkene 16 , the related diacetates 7 and 13 , and the monoacetate 8 led diastereoselectivity to the (2R)- and (2S)-configurated hydropyridotriazoles 17 , 9 and 11 , 14 and 15 , and 10 and 12 , respectively (Scheme 1). Thermolysis of 16 gave also the aziridine 18 , its proportion increasing with reaction time. The diastereoselectivity of the cycloaddition- is rationalized on the basis of steric interactions and of H? bonds in the transition state. Photolysis in benzene partially transformed 9 into the aziridine 19 . Treatment of 9 with aqueous AcOH gave 19 and the tetrahydrofuran 20 , with AcOH in benzene 20 and the triacetate 23 , and with aqueous H₂SO₄ in THF, the primary alcohol 22 (room temperature) or 19 and 22 (0°). Deacetylation of 9 followed by reaction with pyridinium hydrochloride led to the tetrahydrofuran 21 and the chloride 24 (Scheme 2). The diacetate 22 and the triacetate 23 gave the tripl 25 which was deprotected to 26 . Reduction of the keto-aziridine 18 (NaBH₄) gave the alcohols 27 and 29 which were acetylated to give 28 and 19 , respectively (Scheme 3). Treatment of the aziridine 28 with AcOH in benzene followed by deacetylation gave 30 and hence 31 . AcOH in benzene transformed the triazoline 15 first into the aziridine 32 and hence into 33 , which was deprotected to give the triol 34 and hence 35 . The 2-(hydroxymethyl)piperidines 26 , 31 , and 35 inhibited Vibrio cholerae sialidase with K₁ = 3.8 · 10^?2 M, 3.4 · 10^?3 M, and 1.5 · 10^?4 M, respectively. The conformation of the glycerol side chain of these compounds and of the unbranched piperidines 2–4 deviates from the one of Neu5Ac (and Neu2en5Ac). This finding is rationalized by an H-bond between OH? C(8) and NH? C(6). The conformations and the K₁ values of 26 , 31 , and 35 correlate with each other.     

High-pressure dissociation of crystalline para-diiodobenzene: optical experiments and Car-Parrinello calculations

We have investigated the high-pressure properties of the molecular crystal para-diiodobenzene, by combining optical absorption, reflectance, and Raman experiments with Car-Parrinello simulations. The optical absorption edge exhibits a large red shift from 4 eV at ambient conditions to about 2 eV near 30 GPa. Reflectance measurements up to 80 GPa indicate a redistribution of oscillator strength toward the near-infrared. The calculations, which describe correctly the two known molecular crystal phases at ambient pressure, predict a nonmolecular metallic phase, stable at high pressure. This high-density phase is characterized by an extended three-dimensional network, in which chemically bound iodine atoms form layers connected by hydrocarbon bridges. Experimentally, Raman spectra of samples recovered after compression show vibrational modes of elemental solid iodine. This result points to a pressure-induced molecular dissociation process which leads to the formation of domains of iodine and disordered carbon.     

Optically active polymers containing side-chain photochromic moieties: Synthesis and chiroptical properties of copolymers of trans-4-(phenylazo)-1-naphthyl acrylate and trans-4-(1-naphthylazo)-phenyl acrylate with (?)-menthyl acrylate

The synthesis of photochromic optically active copolymers from trans-4-(phenylazo)-1-naphthyl acrylate (PANA), or trans-4-(1-naphthylazo)-phenyl acrylate (NAPA), and (?)-menthyl acrylate (MtA) is described. The copolymers prepared, having different contents of trans-phenylazonaphthalene moieties, have been characterized by IR, ¹H-NMR, UV, and GPC techniques. The chiroptical properties have been investigated by circular dichroism (CD) and the induced optical activity on the side-chain trans-phenylazonaphthalene chromophores discussed in terms of different conformational situations of the macromolecules in both the copolymer series. © 1994 John Wiley & Sons, Inc.     

Wavy graphene sheets from electrochemical sewing of corannulene

The presence of non-hexagonal rings in the honeycomb carbon arrangement of graphene produces rippled graphene layers with valuable chemical and physical properties. In principle, a bottom-up approach to introducing distortion from planarity of a graphene sheet can be achieved by careful insertion of curved polyaromatic hydrocarbons during the growth of the lattice. Corannulene, the archetype of such non-planar polyaromatic hydrocarbons, can act as an ideal wrinkling motif in 2D carbon nanostructures. Herein we report an electrochemical bottom-up method to obtain egg-box shaped nanographene structures through a polycondensation of corannulene that produces a new conducting layered material. Characterization of this new polymeric material by electrochemistry, spectroscopy, electron microscopy (SEM and TEM), scanning probe microscopy, and laser desorption-ionization time of flight mass spectrometry provides strong evidence that the anodic polymerization of corannulene, combined with electrochemically induced oxidative cyclodehydrogenations (Scholl reactions), leads to polycorannulene with a wavy graphene-like structure.

A bottom-up synthesis of wavy graphene structures obtained through an anodic polymerization process, combined with an electrochemically triggered oxidative cyclodehydrogenation, of the bowl-shaped polyaromatic hydrocarbon corannulene.     

Time-resolved electron paramagnetic resonance of photoinduced ion pairs in blends of polythiophene and fullerene derivatives

Substituted polythiophene and triethylenglycolpyrrolidino-C(60) blends are examined by time-resolved electron paramagnetic resonance (TR-EPR) at different temperatures. TR-EPR spectra recorded on the microsecond time scale after a short laser pulse are assigned to polythiophene and fullerene radical ion pairs, generated by electron transfer from the excited state of polythiophene to fullerene. At low temperatures, TR-EPR spectra show polarized lines with an antiphase emission/absorption pattern. The origin of the polarization pattern is described in the frame of spin correlated radical pair theory, in which two unpaired electron spins (on radical cation and anion, respectively) interact through isotropic spin exchange and anisotropic dipolar interactions. The polarization pattern is accounted for assuming a singlet excited state as the precursor of the charge-separated state. Spectral simulations yield dipolar and spin exchange coupling constants between unpaired electrons of the radical ion pair. Their values correspond to a mean distance between opposite charges of 22 A. When the temperature is increased, the spectra gradually loose their antiphase character and eventually consist of a signal totally in emission. This behavior is explained by a polarization mechanism involving a spin-selective charge recombination (ST(-1) mixing). The polarization pattern at different temperatures is examined in detail, and its generating mechanism is discussed.     

Synthesis of mesoporous carbons using ordered and disordered mesoporous silica templates and polyacrylonitrile as carbon precursor

Mesoporous carbons were synthesized from polyacrylonitrile (PAN) using ordered and disordered mesoporous silica templates and were characterized using transmission electron microscopy (TEM), powder X-ray diffraction, nitrogen adsorption, and thermogravimetry. The pores of the silica templates were infiltrated with carbon precursor (PAN) via polymerization of acrylonitrile from initiation sites chemically bonded to the silica surface. This polymerization method is expected to allow for a uniform filling of the template with PAN and to minimize the introduction of nontemplated PAN, thus mitigating the formation of nontemplated carbon. PAN was stabilized by heating to 573 K under air and carbonized under N2 at 1073 K. The resulting carbons exhibited high total pore volumes (1.5-1.8 cm3 g(-1)), with a primary contribution of the mesopore volume and with relatively low microporosity. The carbons synthesized using mesoporous templates with a 2-dimensional hexagonal structure (SBA-15 silica) and a face-centered cubic structure (FDU-1 silica) exhibited narrow pore size distributions (PSDs), whereas the carbon synthesized using disordered silica gel template had broader PSD. TEM showed that the SBA-15-templated carbon was composed of arrays of long, straight, or curved nanorods aligned in 2-D hexagonal arrays. The carbon replica of FDU-1 silica appeared to be composed of ordered arrays of spheres. XRD provided evidence of some degree of ordering of graphene sheets in the carbon frameworks. Elemental analysis showed that the carbons contain an appreciable amount of nitrogen. The use of our novel infiltration method and PAN as a carbon precursor allowed us to obtain ordered mesoporous carbons (OMCs) with (i) very high mesopore volume, (ii) low microporosity, (iii) low secondary mesoporosity, (iv) large pore diameter (8-12 nm), and (v) semi-graphitic framework, which represent a desirable combination of features that has not been realized before for OMCs.     

An exact algorithm for the maximum stable set problem

We describe a new branch-and-bound algorithm for the exact solution of the maximum cardinality stable set problem. The bounding phase is based on a variation of the standard greedy algorithm for finding a colouring of a graph. Two different node-fixing heuristics are also described. Computational tests on random and structured graphs and very large graphs corresponding to real-life problems show that the algorithm is competitive with the fastest algorithms known so far.This work has been supported by Agenzia Spaziale Italiana.