Spectrophotometric determination of chlorhexidine with bromocresol green by flow-injection and manual methods

A spectrophotometric study of the chlorhexidine/bromocresol green/Triton X-100 system is reported; at pH 5.3, both 2:1 and 1:1 bromocresol green/chlorhexidine complexes are formed. In the manual spectrophotometric method, Beer's law is obeyed for chlorhexidine concentrations of 2.9–32.2 μg ml^?1 (r.s.d. 0.4–1.3%); the molar absorptivity is 12 500 l mol^?1 cm^?1. In the flow-injection method, the calibration graph is linear for the chlorhexidine range 23.0–83.9 μg ml^?1 (r.s.d. 0.8%); the injection is ca. 60 h^?1. Benzocaine, acetylsalicylic acid, ascorbic acid and sucrose are tolerated at 10^?2?10^?3 M levels. Hibitane 5% was analyzed successfully.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Determination of promethazine hydrochloride with bromophenol blue by a turbidimetric method and flow injection analysis

A flow injection analysis procedure for the turbidimetric determination of promethazine is proposed. The sample solution is injected directly into the carrier reagent stream, which is composed of 1.16 × 10⁻³M bromophenol blue at pH 1.20. The calibration graph is linear over the range 25–197 ppm of promethazine. The influence of some foreign substances was also investigated. The method is applied to promethazine determination in a pharmaceutical formulation.     

Improving the approximation of the probability density function of random nonautonomous logistic‐type differential equations

In this paper, we address the problem of approximating the probability density function of the following random logistic differential equation: P^′(t,ω)=A(t,ω)(1?P(t,ω))P(t,ω), t∈[t₀,T], P(t₀,ω)=P₀(ω), where ω is any outcome in the sample space Ω. In the recent contribution [Cortés, JC, et al. Commun Nonlinear Sci Numer Simulat 2019; 72: 121–138], the authors imposed conditions on the diffusion coefficient A(t) and on the initial condition P₀ to approximate the density function f₁(p,t) of P(t): A(t) is expressed as a Karhunen–Loève expansion with absolutely continuous random coefficients that have certain growth and are independent of the absolutely continuous random variable P₀, and the density of P₀, , is Lipschitz on (0,1). In this article, we tackle the problem in a different manner, by using probability tools that allow the hypotheses to be less restrictive. We only suppose that A(t) is expanded on L²([t₀,T]×Ω), so that we include other expansions such as random power series. We only require absolute continuity for P₀, so that A(t) may be discrete or singular, due to a modified version of the random variable transformation technique. For , only almost everywhere continuity and boundedness on (0,1) are needed. We construct an approximating sequence of density functions in terms of expectations that tends to f₁(p,t) pointwise. Numerical examples illustrate our theoretical results.     

Photo-induced Fluorescence of Fluometuron in a Continuous-flow Multicommutation Assembly

This paper deals with the photo-induced fluorimetric determination of the herbicide Fluometuron with the aid of a continuous-flow assembly of the emergent and new methodology known as Multicommutation which was provided with an on-line photoreactor. Maximum fluorescence intensity was observed at basic pH solutions, 1×10⁻⁴ mol l⁻¹ NaOH, after 1.4 min of irradiation and being the maximum at λ_exc 247.0 nm and λ_em 325.0 nm. The influence of different experimental parameters either chemical (pH, surfactants presence, solvent polarity and temperature) or hydrodynamic (time of photo-degradation, size and number of different segments and flow-rate) was tested. The linear dynamic range was from 0.01 to 4.0 mg l⁻¹ of Fluometuron; the inter-day reproducibility (as R.S.D.) of the slope was 0.001% and 1.7% from the peaks intra-day reproducibility. A large series of potential interferents was studied and finally the method was applied to human urine, soil, formulation and water samples.     

Supershell structure in alkali metal nanowires

Nanowires are formed by indenting and subsequently retracting two pieces of sodium metal. Their cross section gradually reduces upon retraction and the diameters can be obtained from the conductance. In previous work we have demonstrated that when one constructs a histogram of diameters from large numbers of indentation-retraction cycles such histograms show a periodic pattern of stable nanowire diameters due to shell structure in the conductance modes. Here, we report the observation of a modulation of this periodic pattern, in agreement with predictions of a supershell structure.     

Determination of diphenhydramine hydrochloride by flow injection with bromophenol blue and turbidimetric measurement

The study of a number of diphenhydramine-dye systems was carried out in order to determine the most suitable precipitate for the turbidimetric determination of diphenhydramine using flow injection (FI). The reagent selected was Bromophenol Blue. The chemical and FI variables were optimised. The calibration graph was linear over the concentration range 50-230 p.p.m. of diphenhydramine hydrochloride. A number of interfering substances were also investigated.     

Quantitative colorimetric-imaging analysis of nickel in iron meteorites

A quantitative analytical imaging approach for determining the nickel content of metallic meteorites is proposed. The approach uses a digital image of a series of standard solutions of the nickel-dimethylglyoxime coloured chelate and a meteorite sample solution subjected to the same treatment as the nickel standards for quantitation. The image is processed with suitable software to assign a colour-dependent numerical value (analytical signal) to each standard. Such a value is directly proportional to the analyte concentration, which facilitates construction of a calibration graph where the value for the unknown sample can be interpolated to calculate the nickel content of the meteorite. The results thus obtained were validated by comparison with the official, ISO-endorsed spectrophotometric method for nickel.The proposed method is fairly simple and inexpensive; in fact, it uses a commercially available digital camera as measuring instrument and the images it provides are processed with highly user-friendly public domain software (specifically, ImageJ, developed by the National Institutes of Health and freely available for download on the Internet).In a scenario dominated by increasingly sophisticated and expensive equipment, the proposed method provides a cost-effective alternative based on simple, robust hardware that is affordable and can be readily accessed worldwide. This can be especially advantageous for countries were available resources for analytical equipment investments are scant. The proposed method is essentially an adaptation of classical chemical analysis to current, straightforward, robust, cost-effective instrumentation.     

Quantum mechanics: cleaning up metaphysical baggage

The dynamic electronic structure of atoms and molecules can be directly observed by means of the (e, 2e) reaction, which measures the distribution of energies and momenta of two electrons in coincidence after a knockout reaction initiated by an electron beam of known momentum incident on a molecular gas target. The molecular state for each event is identified by the electron separation energy. The recoil momentum for each event is known from the difference of measured initial and final momenta. It has been verified that values of this momentum are equal under suitable conditions to the momentum of the electron in the target immediately before knockout. Thus the spherically-averaged electron momentum distribution for each molecular orbital is measured. This is directly related to molecular orbitals calculated by the methods of quantum chemistry. Properties obtained by this method for different types of molecules are discussed.