A Systems Approach to a One-Pot Electrochemical Wittig Olefination Avoiding the Use of Chemical Reductant or Sacrificial Electrode

An unprecedented one-pot fully electrochemically driven Wittig olefination reaction system without employing a chemical reductant or sacrificial electrode material to regenerate triphenylphosphine (TPP) from triphenylphosphine oxide (TPPO) and base-free in situ formation of Wittig ylides, is reported. Starting from TPPO, the initial step of the phosphoryl P=O bond activation proceeds through alkylation with RX (R=Me, Et; X=OSO₂CF₃ (OTf)), affording the corresponding [Ph₃POR]⁺X⁻ salts which undergo efficient electroreduction to TPP in the presence of a substoichiometric amount of the Sc(OTf)₃ Lewis acid on a Ag-electrode. Subsequent alkylation of TPP affords Ph₃PR⁺ which enables a facile and efficient electrochemical in situ formation of the corresponding Wittig ylide under base-free condition and their direct use for the olefination of various carbonyl compounds. The mechanism and, in particular, the intriguing role of Sc³⁺ as mediator in the TPPO electroreduction been uncovered by density functional theory calculations.     

Gettering of implanted Au in MeV?C implanted Si

The gettering behavior of 1 MeV?C implantation induced defects for Au (1.5 MeV, 2.2×10¹⁵ cm^-2), implanted into FZ Si(111), has been investigated using Rutherford backscattering spectrometry and cross-sectional transmission electron microscopy. The gettering efficiency of the C implanted layer has been studied as a function of C dose, annealing temperature and time. For a C dose of 2×10¹⁶ cm^-2, a 2 h anneal at 950 °C has been found to result in a gettering efficiency going beyond ?90%. Thermal stability of the gettered Au in the C implanted layer has subsequently been investigated over a temperature range of 950–1150 °C using isochronal annealing. The gettered amount has been found to be stable up to 1050 °C beyond which there is a release. We have observed nanovoids in the C implanted layer surrounded by ?-SiC precipitates along with patches of a-SiC. Up to about 1050 °C, these nanovoids act as efficient gettering centers beyond which they seem to release the trapped Au. Four distinct regimes in annealing temperature with different mechanisms for Au gettering have been observed.     

Simulating GTP:Mg and GDP:Mg with a simple force field: A structural and thermodynamic analysis

Di‐ and tri‐phosphate nucleotides are essential cofactors for many proteins, usually in an Mg²⁺‐bound form. Proteins like GTPases often detect the difference between NDP and NTP and respond by changing conformations. To study such complexes, simple, fixed charge force fields have been used, which allow long simulations and precise free energy calculations. The preference for NTP or NDP binding depends on many factors, including ligand structure and Mg²⁺ coordination and the changes they undergo upon binding. Here, we use a simple force field to examine two Mg²⁺ coordination modes for the unbound GDP and GTP: direct, or “Inner Sphere” (IS) coordination by one or more phosphate oxygens and indirect, “Outer Sphere” (OS) coordination involving one or more bridging waters. We compare GTP: and GDP:Mg binding with OS and IS coordination; combining the results with experimental data then indicates that GTP prefers the latter. We also examine different kinds of IS coordination and their sensitivity to a key force field parameter: the optimal Mg:oxygen van der Waals distance R_min. Increasing R_min improves the Mg:oxygen distances, the GTP: and GDP:Mg binding affinities, and the fraction of GTP:Mg with β + γ phosphate coordination, but does not improve or change the GTP/GDP affinity difference, which remains much larger than experiment. It has no effect on the free energy of GDP binding to a GTPase. © 2012 Wiley Periodicals, Inc.     

Photophysical properties of coumarin-7 dye: role of twisted intramolecular charge transfer state in high polarity protic solvents

Photophysical studies on coumarin-7 (C7) dye in different protic solvents reveal interesting changes in the properties of the dye on increasing the solvent polarity (Deltaf; Lippert-Mataga solvent polarity parameter) beyond a critical value. Up to Deltaf approximately 0.31, the photophysical properties of the dye follow good linear correlations with Deltaf. For Deltaf > approximately 0.31, however, the photophysical properties, especially the fluorescence quantum yields (Phi(f)), fluorescence lifetimes (tau(f)) and nonradiative rate constants (k(nr)), undergo large deviations from the above linearity, suggesting an unusual enhancement in the nonradiative decay rate for the excited dye in these high polarity protic solvents. The effect of temperature on the tau(f) values of the dye has also been investigated to reveal the mechanistic details of the deexcitation mechanism for the excited dye. Studies have also been carried out in deuterated solvents to understand the role of solute-solvent hydrogen bonding interactions on the photophysical properties of the dye. Observed results suggest that the fluorescence of the dye originates from the planar intramolecular charge transfer (ICT) state in all the solvents studied and the deviations in the properties in high polarity solvents (Deltaf > approximately 0.31) arise due to the participation of a new deexcitation channel associated with the formation of a nonfluorescent twisted intramolecular charge transfer (TICT) state of the dye. Comparing present results with those of a homologous dye coumarin 30 (C30; Photochem. Photobiol., 2004, 80, 104), it is indicated that unlike in C30, the TICT state of the C7 dye does not experience any extra stability in protic solvents compared to that in aprotic solvents. This has been attributed to the presence of intramolecular hydrogen bonding between the NH group (in the 3-benzimidazole substituent) of the C7 dye and its carbonyl group, which renders an extra stability to the planar ICT state, making the TICT state formation relatively difficult. Qualitative potential energy diagrams have been proposed to rationalize the differences observed in the results with C7 and C30 dyes in high polarity protic solvents.     

Influence of Confined Water on the Photophysics of Dissolved Solutes in Reverse Micelles

The photophysical parameters of two probes with largely different hydrophobic character, namely, coumarin 1 and coumarin 343, are investigated in sodium bis‐(2‐ethylhexyl)sulfosuccinate (AOT)/hexane/water reverse micelles at various water/AOT molar ratio w₀. Correlation of photophysical parameters such as fluorescence quantum yield, fluorescence lifetime, and emission maxima with w₀ indicate distinctly different trends below and above w₀≈7 for both probes. The variation of the average rotational correlation times obtained from fluorescence anisotropy decays for both probes in reverse micelles further corroborate the above observation. Similar studies were also performed in nonaqueous reverse micelles with acetonitrile as polar solvent. Similar to aqueous reverse micelles, breaks in the photophysical parameters with increasing acetonitrile/AOT molar ratios w′₀ were also observed in these cases, although at a much lower w′₀ value of 3. The present results indicate that around w₀≈7 for aqueous reverse micelles (and around w′₀≈3 for nonaqueous reverse micelles) a distinct change occurs in the probe microenvironment, which is rationalized on the basis of the relative populations of interfacial and core water. We propose that until the ionic head groups and counterions are fully solvated by polar solvents, that is, up to w₀≈7 (or w′₀≈3), the interfacial water population dominates. Above these molar ratios coalescence of excess water molecules with each other to form truncated H‐bonded water clusters leads to a sizable population of core water. This is further substantiated by changes in the IR absorption spectra for the O? D stretching mode of diluted D₂O in reverse micelles with varying w₀. Critical comparison of the present results with relevant literature reports provide clear support for the proposals made on water structure in reverse micelles. The role of relative size of the probe and the reverse micelles for differences in polar solvent to AOT ratios (w₀=7 and w′₀=3) in the observed breaks in the two types of reverse micelles is also discussed.     

Biohydrogen Production from Mushroom Cultivation Waste by Anaerobic Solid‐state Fermentation

Mushroom cultivation waste (MCW) is a polypropylene bag stuffed with wood flour and nutrients for growing mushroom, which is a feasible feedstock for anaerobic biohydrogen production owing to its abundant availability, high organic and nutrient content. This study optimized the seed inoculum from various waste sludges (sewage sludge, cow dung and pig slurry), nutrient addition and operation conditions (moisture content and MCW powder particle size) for maximal biohydrogen production by solid‐state fermentation (SSF). SSF batch test was operated at a MCW 3 g total volatile solid (TVS)/L, temperature 55 °C and rotation speed of 15 rpm with a vertical rotative shaker. The peak hydrogen production performance of hydrogen production rate (HPR) 9.50 mol H₂/kg‐d and hydrogen yield (HY) 0.29 mmol H₂/g TVS) are obtained using sewage sludge 2 seed inoculum, nutrients addition, moisture content 70 % and particle size of 1.190～0.590 mm. The results show that the MCW has the potential for hydrogen production by anaerobic mixed microflora using solid‐state fermentation. The bioenergy of 1842 kWh while using SSF to conver MCW to produce biohydrogen and it could reduce CO₂ emission of 114–178 kg per year comparing using fossil fuel such as coal, fuel oil and natural gas.     

Mimicking the Aromatic‐Ring‐Cleavage Activity of Gentisate‐1,2‐Dioxygenase by a Nonheme Iron Complex

Gentisate‐1,2‐dioxygenase (GDO), a nonheme iron enzyme in the cupin superfamily, catalyzes the cleavage of the aromatic‐ring of 2,5‐dihydroxybenzoic acid (gentisic acid) to form maleylpyruvic acid in the microbial aerobic degradation of aromatic compounds. To develop a functional model of GDO, we have isolated a nonheme iron(II) complex, [(Tp^Ph2)Fe^II(DHN‐H)] (Tp^Ph2=hydrotris(3,5‐diphenylpyrazole‐1‐yl)borate, DHN‐H=1,4‐dihydroxy‐2‐naphthoate). In the reaction with O₂, the biomimetic complex oxidatively cleaves the aromatic ring of the coordinated substrate with the incorporation of both the oxygen atoms from molecular oxygen into the cleavage product. The presence of para‐hydroxy group on the substrate plays a crucial role in directing the aromatic‐ring cleaving reaction.     

Condensed two- and three-dimensional aromatic systems: a theoretical study on the relative stabilities of isomers of CB19H16+, B20H15Cl, and B20H14Cl2 and comparison to B12H10Cl22-, C6H4Cl2, C10H7Cl, and C10H6Cl2

DFT studies (B3LYP/6-31G) on mono- and dichloro derivatives of benzene, naphthalene, B12H12(2-), four-atom-sharing condensed systems B20H16, and monocarborane isomers of B20H16 are used to compare the variation of relative stability and aromaticity between condensed aromatics. The trends in the variation of the relative energies and aromaticity in these two- and three-dimensional systems are similar. Aromaticity, estimated by NICS values, does not change considerably with condensation or substitution. The minor variation in the relative energies of the isomers of chloro derivatives is explained by the topological charge stabilization rule of Gimarc. The compatibility of the cap and ring orbitals decides the relative stability of CB19H16+.     

Synthesis and Characterization of Mn-Doped ZnO Nanocrystals

We report the synthesis and characterization of several sizes of Mn-doped ZnO nanocrystals, both in the free-standing and the capped particle forms. The sizes of these nanocrystals could be controlled by capping them with polyvinylpyrollidone under different synthesis conditions and were estimated by X-ray diffraction and transmission electron microscopy. The absorption properties of PVP-capped Mn-doped ZnO exhibit an interesting variation of the band gap with the concentration of Mn. Fluorescence emission, electron paramagnetic resonance, and X-ray absorption spectroscopy provide evidence for the presence of Mn in the interior as well as on the surface of the nanocrystals.     

Electrochemical methods in understanding the redox processes of drugs and biomolecules and their sensing

Progression of the biochemical information of drugs and its interaction with biological substances require efficient methodologies suitable for generating information without incurring any significant damage to the analytes. Electrochemical methods provide useful information and compatible to the biological environments, without any significant alterations in the analyte, the methods are capable in onsite applications. Present review discusses about the application of the electrochemical techniques in evaluating the mechanism of interaction of drugs with the biomaterials like proteins, lipids, and DNA. The redox process leads to the determination of the drugs and biomolecules through the development of modified electrodes. The modified ultra-microelectrodes (UMEs) or nano electrodes are useful in sensing at the extracellular level of single cells. The electrochemical collision using UMEs provides information about the single molecular level. Present article discusses a brief review of some of the drug and biomolecule interactions using macro and also UMEs.