Intramolecular interactions between chalcogen atoms: organoseleniums derived from 1-bromo-4-tert-butyl-2,6-di(formyl)benzene

[structure: see text] The synthesis and characterization of a series of low-valent organoselenium compounds derived from 1-bromo-4-tert-butyl-2,6-di(formyl)benzene (22) is described. The synthesis of diselenide 25 was achieved by the lithiation route whereas bis(4-tert-butyl-2,6-di(formyl)phenyl) diselenide (26) was synthesized by treating 22 with disodium diselenide. A series of monoselenides (27, 28, and 29) was obtained by facile nucleophilic substitution of bromine in 22, using the corresponding selenolates as nucleophiles. The halogenation reactions of bis(4-tert-butyl-2,6-di(formyl)phenyl) diselenide (26) did not afford the corresponding selenenyl halides but resulted in the isolation of an unexpected cyclic selenenate ester 34 as a product. The selenide 32 was synthesized by the treatment of dimethoxymethyl diselenide with trilithiated 2-bromo-5-tert-butyl-N,N'-di(phenyl)isophthalamide. The existence of potential Se...O intramolecular nonbonding interactions was examined by IR, (1)H, and (77)Se NMR spectroscopy, X-ray crystallography, and computational studies. The X-ray crystal structures of 26 and 27, having two ortho formyl groups, reveal the absence of any Se...O interactions. However, the Se...O interactions were observed in the selenenate ester 34 where one of the formyl groups has been utilized for the selenenate ring formation. The crystal structures of 26 and 27 exhibited intermolecular short-range C-H...Se interactions (hydrogen bonding). Although there are four heteroatoms in carbamoyl moieties ortho to selenium capable of forming a five-membered ring on intramolecular coordination, no such intramolecular Se...X (X = N, O) interaction was observed in the crystal structure of 32. The density functional theory calculations at the B3LYP/6-31G* level predicted that for all the diformyl systems (47a-c, 48a-c), the anti,anti conformer (when both formyl oxygen atoms point away from the selenium) is more stable. This preference was found to be reversed in the monoformyl-substituted systems (50a,b, 51a,b), where the syn conformer (when formyl oxygen is near the selenium) is energetically more favorable than the anti conformer.     

Kinetics and mechanism of exchange of cyanide in hexacyanoferrate(II) by N-methylpyrazinium ion in the presence of mercury(II) as a catalyst

The kinetics of the mercury(II) catalysed ligand exchange of the hexacyanoferrate(II) complex with the N-methylpyrazinium ion (Mpz⁺) in a potassium hydrogen phthalate buffer medium has been investigated at 25.0 ± 0.1 °C, pH = 5.0 ± 0.02 and ionic strength, I = 0.1 M (KNO₃). The reaction was followed spectrophotometrically in the aqueous medium by measuring the increase in absorbance of the intense blue complex [Fe(CN)₅Mpz]^2– at its _max 655 nm. The effect of pH, and the concentrations of [Fe(CN)₆ ^4–] and Mpz⁺ on the reaction rate have been studied and analysed. The varying catalytic activity of mercury(II) as a function of concentration has also been explained. The kinetic data suggest that substitution follows an interchange dissociative (I _d) mechanism and occurs via formation of a solvent-bound intermediate. The effects of the dielectric constant of the medium on the reaction rates have been used to visualize the formation of a polar activated complex and an interchange dissociative mechanism for the reaction. A mechanism has been proposed in order to interpret the kinetic data. Kinetic evidence is reported for the displacement of CN^– by Mpz⁺ in [Fe(CN)₆ ^4–]. Activation parameters for the catalysed and uncatalysed reaction have been evaluated, and lend further support to the proposed mechanism.     

Substitution reactions under NH3 chemical ionization conditions in cis-/trans-1,2-dihydroxybenzosuberans

The nucleophilic substitution reaction under NH₃ chemical ionization (CI) conditions in cis- and trans-1,2-dihydroxybenzosuberans (1–4) has been studied with the help of ND₃ CI and metastable data. The results indicate that in the parent diols 1 (cis) and 2 (trans), the substitution ion [M_sH]⁺, is produced mainly by the loss of H₂O from the [MNH₄]⁺ ion (S_Ni reaction) while in their 7-methoxy derivatives 3 and 4, the ion-molecule reaction between [M? OH]⁺ and NH₃ seems to be the major pathway for the formation of [M_sH]⁺. The substitution ion from 1 and 2 and the [MH]⁺ ion from trans-1-amino-2-hydroxybenzosuberan give similar collision-induced dissociation mass-analysed ion kinetic energy spectra. Interestingly, their diacetates do not undergo the substitution reaction.     

ZnO-TiO2 hybrid nanocrystal-loaded,wash durable,multifunction cotton textiles

Life-threatening diseases, especially those caused by pathogens and harmful ultraviolet radiation (UV-R), have triggered increasing demands for comfortable, antimicrobial, and UV-R protective clothing with a long service life. However, developing such textiles with exceptional wash durability is still challenging. Herein, we demonstrate how to fabricate wash durable multifunctional cotton textiles by growing in situ ZnO-TiO₂ hybrid nanocrystals (NCs) on the surface of cellulosic fabrics. The ZnO-TiO₂ hybrid NCs presented high functional efficiency, owing to their high charge transfer/separation. Ultrafine fiber surface pores, utilized as nucleating sites, endowed the uniform growth of NCs and their physical locking. The resulting fabrics presented excellent UV protection factors up to 54, displayed bactericidal efficiency of 100% against Staphylococcus aureus and Escherichia coli, and optimum self-cleaning efficacy. Moreover, the functionalized textiles exhibited robust washing durability, maintaining antibacterial and anti-UV-R efficiency even after 30 extensive washing cycles.

Graphical abstract

     

Chelating resin-impregnated paper chromatography, applications to trace element collection of ferrous and ferric ions, and determination by differential pulse anodic stripping voltammetry

An ion-exchange approach to the preparation of chelating resin is demonstrated whereby a typical sulfonated chelating agent, 7-iodo-8-hydroxy quinoline-5-sulfonic acid, is immobilized as counterions on a piperazinium polyelectrolyte matrix. The resulting chelate forming resin has been used to effect the selective separation of ferrous as well as ferric ion from a known mixture containing other trace elements without any complication of the leaching of either chelating ligand or resin from the stationary support. The chelating resin-impregnated paper chromatographic technique followed with differential pulse anodic stripping analysis is described for the preconcentration, separation, and recovery of divalent and trivalent ions of iron from the various heavy metals in aqueous phases. The combination of chelation and paper chromatography involves a differential migration procedure which provides a technique for the separation of analyte ions quantitatively without any interference from the complex matrices.     

Polymerization of acrylonitrile. Kinetics of the reaction initiated by the Ce(IV)/thioacetamide redox system

Vinyl polymerization of acrylonitrile initiated by the Ce(IV)/thioacetamide redox system has been investigated in aqueous sulfuric acid in the temperature range of 10–20°C. The rate of polymerization (R_p) and the rate of Ce(IV) disappearance (?R_Ce) were measured. The effect of certain water-soluble organic solvents, added electrolytes, and aromatic and heterocyclic organic nitrogen compounds on the rate of polymerization has been investigated. Depending on the experimental results, we have suggested a suitable reaction scheme for the system which involves the production of initiating radicals from the oxidation of thioacetamide (TAm) by ceric ion and the termination of the polymer chain by metal ions.     

Mechanism and kinetics of thermal decomposition of precipitates of the zinc oxide-aluminium oxide system from non-isothermal tg curves

Kinetics of decomposition of the precipitates of the ZnO&2sbndAl₂O₃ system, prepared by coprecipitation and mechanical mixing of the individual precipitates, have been studied. The decomposition of zinc basic carbonate is a first order rate process with an activation energy of 34.5 kcal/mole (Coats and Redfern equation). The decomposition of aluminium hydroxide is also best described as a first order rate process with one break in the Coats and Redfern plot corresponding to activation energies of 29.4 and 8.3 kcal/mole respectively. The entire course of decomposition of coprecipitated as well as mechanically mixed samples cannot be described by any one of the many rate equations available. Consequently, the Coats and Redfern equation has been employed. The plots indicate one or two breaks and thus two to three values of activation energy are reported. From the results it is to be concluded that decomposition of these precipitates is a heterogeneous process. The first step is definitely the decomposition of zinc basic carbonate followed by decomposition of aluminium hydroxide and/or interaction of the two precipitates resulting in the formation of “precursor” to spinel. The results of our earlier investigation on the same system (especially the formation of precursors) are well supported by the results reported in this investigation. p]A new equation (a modified form of the Elovich equation) has been proposed for such heterogeneous decomposition processes. The proposed equation also appears to be the general form of the equations where diffusion is the rate controlling process.     

(Vapor + liquid) equilibria of the binary mixtures of m-cresol with C1-C4 aliphatic alcohols at 95.5 kPa

Bubble point temperatures at 95.5 kPa, over the entire composition range, are measured for the binary mixtures formed by m-cresol with: methanol, ethanol, 1-propanol, 2-propanol, and n-, iso-, sec-, and tert-butanols - using a Swietoslawski-type ebulliometer. The liquid phase composition - bubble point temperature measurements are well represented by the Wilson model. (Vapor + liquid) equilibria predicted from the model are presented.     

Bis(phosphinimino)methanides as ligands in divalent lanthanide and alkaline earth chemistry - synthesis, structure, and catalysis

Divalent bis(phosphinimino)methanide lanthanide complexes of composition [{(Me₃SiNPPh₂)₂CH}EuI(THF)]₂ and [{(Me₃SiNPPh₂)₂CH}YbI(THF)₂] have been prepared by a salt metathesis reactions of K{CH(PPh₂NSiMe₃)₂} and LnI₂. Further reactions of these complexes with [K(THF)_nN(PPh₂)₂] led selectively to the heteroleptic amido complexes [{(Me₃SiNPPh₂)₂CH}Ln{(Ph₂P)₂N}(THF)] (Ln = Eu, Yb). The ytterbium complex can also be obtained by reduction of [{CH(PPh₂NSiMe₃)₂}Yb{(Ph₂P)₂N}Cl] with elemental potassium. The single crystals of [{(Me₃SiNPPh₂)₂CH}Ln{(Ph₂P)₂N}(THF)] contain enantiomerically pure complexes. As a result of the similar ionic radii of the divalent lanthanides and the heavier alkaline earth metals some similarities in coordination chemistry of the bis(phosphinimino)methanide ligand were anticipated. Therefore, MI₂ (M = Ca, Sr, Ba) was reacted with K{CH(PPh₂NSiMe₃)₂} to give [{(Me₃SiNPPh₂)₂CH}CaI(THF)₂], [{(Me₃SiNPPh₂)₂CH}SrI(THF)]₂, and [{(Me₃SiNPPh₂)₂CH}BaI(THF)₂]₂, respectively. As expected the Sr and Eu complexes and the Ca and Yb complexes are very similar, whereas for the Ba compound, as a result of the large ion radius, a different coordination sphere is observed. For all new complexes the solid-state structures were established by single crystal X-ray diffraction. In the solid-state the {CH(PPh₂NSiMe₃)₂}⁻ ligand acts as tridentate donor forming a long methanide carbon metal bond. Thus, all complexes presented can be considered as organometallic compounds. [{(Me₃SiNPPh₂)₂CH}YbI(THF)₂] was also used as precatalyst for the intramolecular hydroamination/cyclization reaction of different aminoalkynes and aminoolefines. Good yields but moderate activities were observed.     

Alkyl (C<Subscript>10</Subscript>, C<Subscript>12</Subscript>, C<Subscript>14</Subscript> and C<Subscript>16</Subscript>) triphenyl phosphonium bromide influenced cloud points of nonionic surfactants (Triton X 100, Brij 56 and Brij 97) and the polymer (Polyvinyl methyl ether)

The clouding points (CP) of the nonionic surfactants p-tert-octyl phenyl polyoxyethylene ether (Triton X 100), Brij-56 and Brij-97, and the water soluble polymer polyvinylmethylether (PVME) have been measured in the presence of the ionic surfactants alkyl (C₁₀, C₁₂, C₁₄ and C₁₆) triphenyl phosphonium bromides (ATPBs). The threshold additive concentrations required for efficient CP enhancement of the systems that were studied have been determined. Considering CP as the threshold state of phase separation, the energetics of the process at different additive concentrations has been evaluated. The spontaneity of free energy of the clouding process (G _c ⁰ ) at the transition concentrations followed the order PVME > TX 100  Bj 56 > Bj 97. The clouding process has been found to be energetically endothermic with fairly large enthalpy and entropy changes that nicely compensate each other. The compensation temperature has been evaluated and compared with different types of the clouding agents.This revised version was published online in January 2005 with corrections to the names of the authors.