添加剂PVP和MTS对合成Beta分子筛结构与性能的影响

分别以铝酸钠和硅溶胶为铝源和硅源,四乙基氢氧化铵为模板剂,在水热条件下,考察了添加剂(聚乙烯吡咯烷酮(PVP)和甲基三乙氧基硅烷(MTS))对合成Beta分子筛结构与性能的影响,并通过XRD、TEM、BET、ICP、~(29)Si-NMR和NH_3-TPD等方法对合成样品进行了结构表征和作用机理讨论,同时以催化裂化异丙苯为模型反应评价其催化性能。结果表明,与传统Beta分子筛相比,加入PVP后所得样品具有更高结晶度和较高的硅铝物质的量比(25.68)以及较大的比表面积(772 m~2/g);而加入MTS后尽管具有较大比表面积(657 m~2/g)和较高硅铝物质的量比(25.76),但是结晶度却相对降低,且粒径减小(160-320 nm)。两种添加剂作用下所得样品均具有更多酸量,在催化裂化异丙苯的反应中表现出较高的催化活性。     

Building and analyzing the US airport network based on en-route location information

From a complex network perspective, this study sets out two aims around the US airport network (USAN) which is built from en-route location information of domestic flights in the US. First, we analyze the structural properties of the USAN with respect to its binary and weighted graphs, and second we explore the airport patterns, which have wide-ranging implications. Results from the two graphs indicate the following. (1) The USAN exhibits scale-free, small-world and disassortative mixing properties, which are consistent with the mainstream perspectives. Besides, we find (2) a remarkable power relationship between the structural measurements in the binary graph and the traffic measurements in the weighted counterpart, namely degree versus capacity and attraction versus volume. On the other hand, investigation of the airport patterns suggests (3) that all the airports can be classified into four categories based on multiple network metrics, which shows a complete typology of the airports. And it further indicates (4) that there is a subtle relationship between the airport traffic and the geographical constraints as well as the regional socioeconomic indicators.     

2 W quasi-white-light based on idler-resonant optical parametric oscillation cascading sum-frequency generation with PPSLT

We present a high power red-green-blue (RGB) laser light source based on cascaded quasi-phasematched wavelength conversions in a single stoichiometric lithium tantalate. The superiority of the experimental setup is: the facula of the incident beam is elliptical to increase interaction volume, and the cavity was an idler resonant configuration for realizing more efficient red and blue light output. An average power of 2 W of quasi-white-light was obtained by proper combination of the RGB three colors. The conversion efficiency for the power of the quasi-white-light over pump power reached 36%. This efficiency and powerful RGB laser light source has potential applications in laser-based projection display et al.     

A new coding scheme of QC-LDPC codes for optical transmission systems

Based on Galois Field (GF(q)) multiplicative group, a new coding scheme for Quasi-Cyclic Low-Density Parity-Check (QC-LDPC) codes is proposed, and the new coding scheme has some advantages such as the simpler construction, the easier implementation encoding, the lower complexity of the encoding and decoding, the more flexible adjustment of the code length as well as the code rate and so forth. Under the condition of considering the characteristics of optical transmission systems, an irregular QC-LDPC (3843,3603) code to be suitable for optical transmission systems is constructed by applying the proposed new coding scheme. The simulation result shows that the net coding gain (NCG) of the irregular QC-LDPC (3843,3603) code is respectively improved 2.14 dB, 1.19 dB, 0.24 dB and 0.14 dB more than those of the classic RS (255,239) code in ITU-T G.975, the LDPC (32640,30592) code in ITU-T G.975.1, the regular SCG-LDPC (3969,3720) code constructed by the Systematically Constructed Gallager (SCG) coding scheme and the regular QC-LDPC (4221,3956) code at the bit error rate (BER) of 10-8. Furthermore, all the five codes have the same code rate of 93.7%. Therefore, the irregular QC-LDPC (3843,3603) code constructed by the proposed new coding scheme has the more excellent error-correction performance and can be better suitable for optical transmission systems.     

A 3D Luminescent Metal‐organic Framework Constructed from Cu4I4 Cubane Clusters and Triangular Imidazole Ligand

Abstract . The solvothermal reaction between cuprous iodide and the rigid triangular imidazole ligand in mixed N,N′‐dimethylacetamide (DMA)‐acetonitrile solvent leads to the isolation of the 3D metal‐organic framework [(Cu₄I₄)₃(TIPA)₄] · 7DMA ( 1 ) [TIPA = tri(4‐imidazolylphenyl) amine], which was characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, and single‐crystal X‐ray diffraction. Topologically, the structure of 1 is an unprecedented 3,3,4,4‐connected net with a point symbol of {4.8.10}₂{4.8²}₂{4².8².10²}₂{8⁴.12²}. Compound 1 exhibits orange‐red photoluminescence with an emission maximum at 622 nm at room temperature.