Studies on the photooxidation mechanism of polymers. I. Photolysis and photooxidation of polystyrene

A new mechanism has been proposed for the photooxidation of polystyrene as film and in benzene. The initial stage of the photooxidative degradation may involve reactions of singlet oxygen with polystyrene molecules. Singlet oxygen may be formed in the reaction between excited benzene ring in polystyrene molecule and molecular oxygen. The addition of singlet oxygen quenchers such as 1,3-cyclohexadiene or β-carotene reduces the rate of polymer degradation in benzene solution. The mechanisms of the photolysis of polystyrene as film and in benzene solution, in vacuo and in the presence of oxygen, are discussed and interpretations proposed. The pronounced yellowing of polystyrene during the photooxidation process is interpreted as a reaction involving benzene ring-opening photooxidation in polystyrene molecule. These results were obtained by comparing ultraviolet and infrared spectra in experiments of photooxidation of pure liquid benzene and polystyrene film.     

Photoinitiated carbonylation with [(11)C]carbon monoxide using amines and alkyl iodides

Photoinitiated radical carbonylation with [(11)C]carbon monoxide at low concentration was employed in syntheses of carbonyl-(11)C-labeled amides using alkyl iodides and amines as precursors. Eleven (11)C-amides were synthesized in up to 74% decay-corrected radiochemical yields with reaction times of 400 s and with up to 95% conversion of carbon monoxide. Starting with 26.3 GBq of [(11)C]carbon monoxide, 10.6 GBq of 1-cyclohexane [(11)C]carbonyl-4-phenyl-piperazine (15) was obtained within 35 min from the end of bombardment (33 microA) and with a specific radioactivity of 192 GBq/micromol at the same time point. The influence of solvents was investigated. The described procedure extends the range of accessible labeling methods. The method may also be useful for preparation of (13)C- and (14)C-substituted compounds.     

Molecular information on the dissolution of polydisperse polymers: Mixtures of long and short poly(ethylene oxide)

A systematic study of the dissolution of dry, polydisperse poly(ethylene oxide) (PEO) samples, obtained from mixtures of low-molecular-weight and high-molecular-weight PEO, was made. During the dissolution process, the individual release of the low- and high-molecular-weight fractions was monitored. The high-molecular-weight/low-molecular-weight ratio controls the release rate, and the fraction of high-molecular-weight polymers dominates the effect on the overall release rate in mixed PEO tablets. Both fractions are released at the same rate during the main part of the dissolution process; however, during the initial dissolution period a fractionation occurs. The release rate is not a unique function of the average molecular weight of the polymer, but also depends on the polydispersity. By contrast, the average dimension of a polymer coil, as given by the intrinsic viscosity, gives a good prediction of the release rate irrespective of the polydispersity or details of the molecular weight distribution.     

Studies on the photooxidation mechanism of polymers. IV. Effect of ultraviolet light (2537 Å) on solid PVC particles suspended in different liquids

The photolysis of virgin PVC powder suspended in water, methanol, n-hexane, aqueous NH₄OH (30 wt-%), and 0.1 wt-% iodine in methanol and also as dry powder was studied. The mechanism of photolysis of PVC powder has been investigated by using ESR spectroscopy, conductivity titration, gel-permeation chromatography (GPC), and absorption spectroscopy. Photolysis of PVC has been found to occur by a free-radical mechanism. ESR spectroscopy permits a partial identification of several different types of free radicals in PVC such as alkyl, polyenyl, and peroxy radicals. An interpretation is proposed of the mechanism of formation of conjugated polyene structures, and also a new explanation of the crosslinking mechanism, in which transfer of unpaired electrons to double bonds occurs, is suggested. It has also been found that conjugated double bonds can photosensitize free-radical formation as a result of increased ultraviolet absorption due to polyene structures.     

Spatial dependence of meson correlation functions at high temperature

The spatial dependence of meson correlation functions at high temperature is studied in perturbative QCD, keeping only the lowest order term. We obtain analytic results for the static correlation function in this approximation. Problems connected with the regularization of the divergent expressions are discussed in detail. The meson screening mass is determined from the form of the correlation function at large distances. We obtain , which agrees with the results of Eletskii and Ioffe, for massless quarks (M=0). Finally, the correlation function in the temporal direction is briefly discussed. For massless quarks, we find the corresponding screening massm _scr=2T.Research supported in part by the Polish State Committee for Scientific Research under Grant No. 2.0204.91.01     

Molecular mass distribution analysis of ethyl(hydroxyethyl)cellulose by size-exclusion chromatography with dual light-scattering and refractometric detection

Dual low-angle light scattering and refractometric detection coupled to size-exclusion chromatography provided proof for the presence of a low amount of stable aggregates/particles in ethyl(hydroxyethyl)cellulose. Unlike the correct size-exclusion chromatographic behavior of the parent polysaccharide itself, the aggregates exhibit variable size-dependent weak retention as a function of flow-rate and of ionic strength of the aqueous mobile phase. Therefore, determination of the molecular mass of non-aggregated polymer is possible in aqueous mobile phase containing 0.1 M NaCl under conditions at which aggregates are completely adsorbed on the column packing irrespective of the flow-rate used. Flow-rate and ionic strength-dependent variations of aggregate behavior as well as model size-exclusion experiments with latex particles indicate that they partly carry a minute charge and have a compact structure. Their weak retention under the separation conditions used suggests a difference in their surface chemistry when compared with the dissolved polymer coils which exhibit a correct size-exclusion behavior.     

Molar mass characterization of cationic methyl methacrylate-ethyl acrylate copolymers using size-exclusion chromatography with online multi-angle light scattering and refractometric detection

Size-exclusion chromatography (SEC) combined with online multi-angle light scattering (MALS) and refractometric (RI) detection has been employed for the molar mass characterisation of water-insoluble cationic methyl methacrylate-ethyl acrylate copolymers (Eudragit RS and RL). Due to their positive charge, cationic polymers are particularly difficult to separate on a SEC column, in worst cases being completely adsorbed on the oppositely charged packing material. This work has examined how a careful addition of salt (LiCl) to the copolymer solution in ethanol decreases the electrostatic interactions, clearly seen as a decrease in elution volume from the SEC column as well as an improved recovery. At a certain level of ionic strength, typically about 50 mM, the copolymer recovery from the SEC column reached 100% and molar mass distributions corresponding to the complete sample could be obtained. The combined MALS/RI detection gives the opportunity to measure the absolute molar mass independent of recovery and retention. Thus, in this study, it turned out to be a favourable tool for tracing the changes in elution behaviour of the charged copolymer as the ionic strength was increased.     

Design and optimization of modified simplex methods

Four test functions are used to evaluate different modifications of the modified simplex method and to optimize the contraction, reflection and expansion parameters. The evaluation shows that some of the modifications and the optimization of the parameters result in a simplex method that has gained in convergence ability, with some improvement in speed.     

Synthesis of 11C-amides using [11C]carbon monoxide and in situ activated amines by palladium-mediated carboxaminations

[11C]Carbon monoxide at low concentrations, aryl halides and amines were used in the palladium-mediated synthesis of twenty 11C-amides. In the study several approaches to improve the radiochemical yield were explored. Eight of the selected amides were prepared by in situ activation of the amines using lithium bis(trimethylsilyl)amide and the radiochemical yields of these reactions were improved compared to utilising a previous reported method. In the synthesis of 1-[carbonyl-11C]benzoyl-3-methyl-1H-indole (11) from 3-methyl-1H-indole (25), the corresponding organotin-amine was prepared prior to the acylation reaction. In a typical experiment, N-(4-hydroxyphenyl)[carbonyl-11C]acetamide (5) was prepared in 15% radiochemical yield using 4-aminophenol (20) but the yield increased to 63% when the amine was activated by lithium bis(trimethylsilyl)amide.     

Computational studies of carbon nanotube-hydrocarbon bond strengths at nanotube ends: effect of link heteroatom and hydrocarbon structure

Semiempirical and density functional electronic structure theory methods were used to study SWNT-X--R bond strengths, where the single-walled carbon nanotube (SWNT) had an armchair or zigzag structure, the link heteroatom X was O, N(H), or S and the hydrocarbon chain R was CH(2)CH(3), CH(OH)CH(3), CHCH(2), or CH(CF(3))CH(3). In all systems the hydrocarbon was bonded to the end of the nanotube. The SWNT-X--R bond (that is, the bond joining the link atom to the hydrocarbon) is more than 0.4 eV stronger for armchair than for zigzag nanotubes with the same diameters, irrespective of whether O, N, or S are used as link atoms or whether OH, C==C, or CF(3) groups are present in the hydrocarbon chain. This raises the possibility for selective manipulation of armchair/zigzag nanotubes using a variety of link atoms and hydrocarbon structures. The SWNT-O--CH(CF(3))CH(3) bond is weaker than the SWNT-O--CH(2)CH(3) bond (for both armchair and zigzag nanotubes), while inclusion of a double bond in the ethyl chain increases the bond strengths. Also, SWNT-S--CH(2)CH(3) and SWNT-N(H)--CH(2)CH(3) bonds are stronger than SWNT-O--CH(2)CH(3) bonds.