Capillary electrophoresis coupled to time of flight-mass spectrometry of therapeutic peptide hormones

We have established a method for separation and characterization of a series of peptide hormones of pharmaceutical interest and wide therapeutical use by capillary electrophoresis-electrospray-mass spectrometry (CE-ES-MS) using a sheath flow interface. Several parameters were systematically investigated, such as concentration of the electrolyte, organic solvent and sheath liquid composition, gas flow rates and capillary position. Moreover, limits of detection, linearity, repeatability and day-to-day reproducibility of the proposed method were studied in order to obtain the main quality parameters.     

Copper determination in biological materials by ETAAS using W-Rh permanent modifier

A tungsten-rhodium treatment on the integrated platform of a transversely heated graphite atomiser was used as a permanent chemical modifier for the determination of copper in biological materials by using digested samples as well as slurry sampling in electrothermal atomic absorption spectrometry. The W-Rh permanent modifier was as efficient as Pd+Mg(NO(3))(2) conventional modifier for obtaining good Cu thermal stabilisation in the digested and slurry samples. The permanent W-Rh modifier remained stable by approximately 300 and 250 firings when 20 mul of digested sample and 20 mul of slurry were delivered into the atomiser, respectively. In addition, the permanent modifier increased the tube lifetime up to 1370 and 744 analytical measurements in the digested and slurry samples, respectively. Also, when the W-Rh permanent modifier was employed, there was less variation of the slope of the analytical curves during the total atomiser lifetime, resulting in a decreased need of re-calibration during routine analysis, increasing the sample throughput, and consequently diminishing the variable analytical costs. Detection limits obtained with W-Rh permanent modifier were 0.64 and 0.33 mug g(-1) Cu for digested (dilution factor 100 ml g(-1)) and 1.0% m/v slurries of biological materials, respectively. Results for the determination of copper in the samples were in agreement with those obtained with decomposed sample solutions by using Pd+Mg(NO(3)), since no statistical differences were found after applying the paired t-test at the 95% level.     

Lupane Pentacyclic Triterpenes Isolated from Stems and Branches of Maytenus imbricata (Celastraceae)

Four lupane pentacyclic triterpenes were isolated from the hexane extract of stems and branches of Maytenus imbricata Mart. ex Reissek : 3‐oxolup‐20(30)‐en‐29‐al ( 1 ), 30‐hydroxylup‐20(29)‐en‐3‐one ( 2 ), (11α)‐11‐hydroxylup‐20(29)‐en‐3‐one ( 3 ), and (3β)‐lup‐20(30)‐ene‐3,29‐diol ( 4 ). The structural identification of 1 – 4 was achieved by ¹H‐ and ¹³C‐NMR techniques, including 2D experiments (HSQC, HMBC, and NOESY).     

Determination of pKa values of some hydroxylated benzoic acids in methanol-water binary mixtures by LC methodology and potentiometry

An accurate estimation of pK_a values in methanol-water binary mixtures is very important for several separation techniques such as liquid chromatography and capillary electrophoresis that use these solvent mixtures. In this study, the pK_a values of 11 polyphenolic acids have been determined in methanol-water binary mixtures (10%, 20% and 30% (v/v)) by potentiometry, liquid chromatography (LC) and LC-DAD methodology.The results show a similar trend for the pK_a values of all the studied compounds, as they increase with increasing concentration of organic modifier, which allows a linear relationship between pK_a values and mole fraction of methanol to be obtained. The pK_a values obtained in aqueous medium have been compared with those given in the literature, and also with the values predicted by the SPARC on-line pK_a calculator. The data obtained have been used to test the feasibility of an estimation of dissociation constants in a methanol-water medium from the relationship between pK_a values and the organic cosolvent fraction in the mixtures.     

Liquid chromatography-electrospray mass spectrometry of multicomponent peptide mixtures. Characterization of a mixture from the synthesis of the hormone goserelin

In order to separate and characterize the target peptide and the side-product peptide compounds of a synthesis mixture of the peptide hormone goserelin, liquid chromatography coupled to high-flow electrospray ionization mass spectrometry (LC-ES-MS) has been used. Goserelin is an important drug with recognized therapeutical application for palliative treatment of prostatic and breast carcinomas. Stepwise solid-phase peptide synthesis commonly results in unwanted side-products associated with incomplete peptide chains. Consequently, this procedure requires extensive purification and characterization of the final synthesis mixture. The method of linear solvation energy relationships has been applied to optimize the proportion of organic modifier of the mobile phase used in the established LC method. On the other hand, ES-MS has allowed rapid and reliable identification of the target peptide and the other impurities present in the goserelin synthesis products.     

Solid-phase extraction system for Pb (II) ions enrichment based on multiwall carbon nanotubes coupled on-line to flame atomic absorption spectrometry

The present paper proposes the application of multiwall carbon nanotubes (MWCNTs) as a solid sorbent for lead preconcentration using a flow system coupled to flame atomic absorption spectrometry. The method comprises the preconcentration of Pb (II) ions at a buffered solution (pH 4.7) onto 30 mg of MWCNTs previously oxidized with concentrated HNO₃. The elution step is carried out with 1.0 mol L⁻¹ HNO₃. The effect of the experimental parameters, including sample pH, sampling flow rate, buffer and eluent concentrations were investigated by means of a 2⁴ full factorial design, while for the final optimization a Doehlert design was employed. Under the best experimental conditions the preconcentration system provided detection and quantification limits of 2.6 and 8.6 μg L⁻¹, respectively. A wide linear range varying from 8.6 up to 775 μg L⁻¹ (r > 0.999) and the respective precision (relative standard deviation) of 7.7 and 1.4% for the 15 and 200 μg L⁻¹ levels were obtained. The characteristics obtained for the performance of the flow preconcentration system were a preconcentration factor of 44.2, preconcentration efficiency of 11 min⁻¹, consumptive index of 0.45 mL and sampling frequency estimated as 14 h⁻¹. Preconcentration studies of Pb (II) ions in the presence of the majority foreign ions tested did not show interference, attesting the good performance of MWCNTs. The accuracy of the method was assessed from analysis of water samples (tap, mineral, physiological serum and synthetic seawater) and common medicinal herbs submitted to the acid decomposition (garlic and Ginkgo Biloba). The satisfactory recovery values obtained without using analyte addition method confirms the feasibility of this method for Pb (II) ions determination in different type of samples.     

Use of cetyltrimethylammonium bromide as surfactant for the determination of copper and chromium in gasoline emulsions by electrothermal atomic absorption spectrometry

In this work, the use of cetyltrimethylammonium bromide as surfactant for the preparation of oil-in-water emulsions for the determination of Cu and Cr in gasoline by electrothermal atomic absorption spectrometry (ET AAS) was evaluated. The surfactant amount was tested in the range of 25 to 300 mg, added to 2 ml of gasoline, and completed to 10 mL with 0.1% (v/v) nitric acid solution. 150 mg of surfactant was found optimum, and a sonication time of 10 min sufficient to form an oil-in-water emulsion that was stable for several hours. The ET AAS temperature program was established based on pyrolysis and atomization curves. The pyrolysis temperatures were set at 700 and 1300 °C for Cu and Cr, respectively and the selected atomization temperatures were 2400 and 2500 °C. The time and temperature of the drying stage and the atomization time were experimentally tested to provide optimum conditions. The limits of detection were found to be 5 μg L^− 1 and 1.5 μg L^− 1 for Cu and Cr, respectively in the original gasoline samples. The relative standard deviation (RSD) ranged from 4 to 9% in oil-in-water emulsions spiked with 5 μg L^− 1 and 15 μg L^− 1 of each metal, respectively. Recoveries varied from 90 to 98%. The accuracy of the proposed method was tested by an alternate procedure using complete evaporation of the gasoline sample. The method was adequate for the determination of Cu and Cr in gasoline samples collected from different gas stations in Salvador, BA, Brazil.     

Influence of heat treatment temperature of carbon fiber felt substrate on polyaniline electrosynthesis and its properties

Journal of Solid State Electrochemistry - Polyaniline was electrosynthesized using three voltammetric cycles on carbon fiber felts annealed at 1400, 1600, 2000, and 2300 K. Felts and...     

Non-conventional oils for biodiesel production: a study of thermal and oxidative stability

Vegetable oils with variable proportions of oleic, linoleic, and linolenic acids are more susceptible to oxidative processes. In this subject, this study evaluates the physical chemical properties and oxidative stability of non-conventional oils such as andiroba, babassu, sesame, oiticica, jatropha, and grape through accelerated oxidation techniques (pressurized differential scanning calorimetry, Rancimat and PetroOxy). It was verified that babassu and andiroba oil do not showed detectable induction period presenting high oxidative stability; moreover, it was observed that the enthalpic events occurred in 1.19, >10, 0.53, 0.49, 0.49, and 0.60 h for the andiroba oil, babassu oil, sesame seeds, jatropha, oiticica oils, and grapes, respectively, stimulating the conclusion of greater stability for the babassu oil.