Electrochemistry of uranium in ionic organic media: Ethylammonium nitrate and acetamide-KSCN eutectic

The electrochemical reduction of hexavalent and tetravalent uranium is investigated in ethylammonium nitrate at 298 K and in the acetamide-KSCN eutectic at 400 K. The transient techniques describe a two-step reduction of UO ₂ ²⁺ in acetamide-KSCN while only one step is observed in ethylammonium nitrate. The reduction of tetravalent uranium proceeds in one step giving trivalent uranium in the two media. In any cases, additional kinetic phenomena are the source of difficulties for the understanding of the reactions. In controlled potential electrolysis, side-reactions between the reduced species and the solvent impede completely the mechanism foreseen by transient methods.     

Diffusion-diffusion correlation and exchange as a signature for local order and dynamics

We demonstrate the use of new two-dimensional nuclear magnetic resonance experiments in the examination of local diffusional anisotropy under conditions of global isotropy. The methods, known as diffusion-diffusion correlation spectroscopy and diffusion exchange spectroscopy, employ successive pairs of magnetic field gradient pulses, with signal analysis using two-dimensional inverse Laplace transformation. Diffusional anisotropy is measured for water molecules in a polydomain lamellar phase lyotropic liquid crystal, 40 wt % nonionic surfactant C10E3 (C10H21O(CH2CH2O)6H) in H2O.     

Cr(III) and Cr(VI) on-line preconcentration and determination with high performance flow flame emission spectrometry in natural samples

Methods for the on-line chromatographic preconcentration of Cr(III) and Cr(VI) have been developed. Cr(VI) has been preconcentrated on an RP C18 silica based column with tetrabutylammonium-bromide (TBABr) as ion-pairing agent. Specially for Cr(III) a new and effective preconcentration technique based on the sorption of Cr(III)-ions in a C18 column in presence of KH-phthalate has been developed. The efficiency of sample introduction into the atomic emission spectrometer could be improved by hydraulic high pressure nebulization. For the detection of chromium the acetylene/N(2)O flame has been used as a powerful emission spectrometric source. Applying these steps the detection limit (3sigma) could be improved to 25 pg/mL for Cr(III) and to 20 pg/mL for Cr(VI). The method has been applied for the chromium speciation in natural water samples.     

Effects of different alkali metal ions on the cationization of poly(ethylene glycol)s in matrix-assisted laser desorption/ionization mass spectrometry: a new selectivity parameter

The cationization of poly(ethylene glycol)s, PEG 4000 and PEG 6000, under matrix-assisted laser desorption/ionization conditions was studied by using different concentration ratios of the sodium ion, as the reference ion, and another alkali metal ion (Li(+), K(+), Rb(+), Cs(+)). A linear correlation was found between the intensity ratio of the sodiated PEGs and PEGs cationized with alkali metal ions versus the initial concentration ratio of sodium and alkali metal ions. The slopes of these straight lines are proposed as a novel selectivity ratio for the ionization process. The intensity distribution of the cationized PEGs was also investigated. It was found that the cationized oligomers follow Poisson statistics. The M(n) and M(w) values were also evaluated. An explanation for the observed effects is given.     

Phosphinerhodium complexes as homogeneous catalysts : VIII. Enantioselective hydrogenation of ketones: evidence for several mechanisms with catalysts containing diop

Optical yields obtained in the hydrogenation of acetophenone with cationic and in situ rhodium complex catalysts depend on the P/Rh ratio and on the ionic or non-ionic character of the active species. The enantioselectivity of the in situ catalyst containing (+)-DIOP is reversed by addition of achiral tri-n-alkyl-phosphines. On the basis of these observations and the amount of H₂ consumed in preforming the catalysts, several different mechanisms are suggested: for example: cycles involving cationic rhodium complexes containing two (or three) phosphorus ligands and cycles involving non-ionic rhodium complexes with two phosphorus ligands in cis or trans positions. In the in situ catalyst with a Rh/(+)-DIOP/P-n-Bu₃  1/1/1 ratio (+)-DIOP functions as a monodentate ligand.     

Copper(II) interaction with unstructured prion domain outside the octarepeat region: speciation, stability, and binding details of copper(II) complexes with PrP106-126 peptides

Copper(II) complexes of the neurotoxic peptide fragments of human and chicken prion proteins were studied by potentiometric, UV-vis, CD, and EPR spectroscopic and ESI-MS methods. The peptides included the terminally blocked native and scrambled sequences of HuPrP106-126 (HuPrPAc106-126NH2 and ScrHuPrPAc106-126NH2) and also the nona- and tetrapeptide fragments of both the human and chicken prion proteins (HuPrPAc106-114NH2, ChPrPAc119-127NH2, HuPrPAc109-112NH2, and ChPrPAc122-125NH2). The histidyl imidazole-N donor atoms were found to be the major copper(II) binding sites of all peptides; 3N and 4N complexes containing additional 2 and 3 deprotonated amide-N donors, respectively, are the major species in the physiological pH range. The complex formation processes for nona- and tetrapeptides are very similar, supporting the fact that successive deprotonation and metal ion coordination of amide functions go toward the N-termini in the form of joined six- and five-membered chelates. As a consequence, the peptide sequences investigated here, related to the neurotoxic region of the human PrP106-126 sequence, show a higher metal-binding affinity than the octarepeat fragments. In the case of the HuPrP peptide sequences, a weak pH-dependent binding of the Met109 residue was also detected in the 3N-coordinated complexes.     

Analytical characterization of diterpenoid resins present in pictorial varnishes using pyrolysis-gas chromatography-mass spectrometry with on line trimethylsilylation

A procedure based on the technique of the pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) has been applied, in this work, in order to determine the composition of diterpenoid resin employed in art works. The method is based on the on line derivatization of these resins using hexamethyldisilazane (HMDS). Results obtained were compared with those previously reported in literature from Venice turpentine, Strasbourg turpentine, colophony, sandarac and Manila copal using this same method and with those others from in situ thermally assisted hydrolysis and methylation with tetramethylammonium hydroxide (TMAH). Canada balsam, copper resinate and Copaiba balsam have been also analyzed extending the scope of this method in the field of the analysis of artwork materials. Several non-reported trimethylsilylated derivatives of compounds present in the diterpenoid resins have been identified. An improvement in sensitivity has been obtained by using HMDS as derivatizing reagent, together with a better resolution of the most representative peaks. Additionally, this method reduces the number of pyrolytic fragmentation, recombination, dehydration and isomerization products formed during the pyrolysis process and, in consequence, more simplified chromatograms are obtained. Finally, the reported procedure has been successfully used for characterizing two diterpenoid resin-based varnishes present in the canvas painting "The Betrothal of the Virgin" (Anonymous, 17th century) which is included in the pictorial collection of Saint Joseph Church in Taormina (Italy) and the Magdalena Tryptich (Master of Alzira, 16th century, Valencia, Spain).     

Selective determination of trimethylamine in air by liquid chromatography using solid phase extraction cartridges for sampling

The selective determination of trimethylamine (TMA) in air by liquid chromatography is reported. Sampling is effected by flushing air through C18-packed solid-phase extraction (SPE) cartridges at a flow rate of 15 mL/min for 15 min. Next, TMA is desorbed from the cartridges and injected into the chromatographic system. The analyte is then selectively retained on a precolumn (20 mm x 2.1 mm i.d., packed with 30 microm, Hypersil C18 phase), and derivatized on-line by injecting 9-fluorenylmethyl chloroformate (FMOC). Finally, the TMA-FMOC derivative is transferred to the analytical column (125 mm x 4 mm i.d., LiChrospher 100 RP18, 5 microm), and monitored at 262 nm. The method was applied to the measurement of TMA in air in the 0.25-2.5 microg interval (equivalent to concentrations of TMA of 1.1-11 mg/m3), providing good linearity, reproducibility and accuracy. The mean recovery of TMA was (96 +/- 7%) (n = 12), and the limit of detection was 0.05 microg. The proposed procedure allows the selective determination of TMA in the presence of other primary and secondary short-chain aliphatic amines.     

Stability study and determination of benzene- and naphthalenesulfonates following an on-line solid-phase extraction method using the new programmable field extraction system

Seven benzene- and naphthalenesulfonates (3-nitrobenzenesulfonate, 4-methylbenzenesulfonate, 1-hydroxy-4-naphthalenesulfonate, 1-amino-7-naphthalenesulfonate, 4-chlorobenzenesulfonate, 1-naphthalenesulfonate and 2-naphthalenesulfonate) were studied. A rapid method for quantifying aromatic sulfonated compounds from waste water samples was developed. This method consists in on-line in-field sampling and monitoring based on ion-pair solid-phase extraction with PLRP-S sorbent, using the new programmable field extraction system and ion-pair liquid chromatography with UV diode-array and electrospray mass spectrometry. Limits of detection for the studied compounds, using the SIM acquisition mode, ranged from 0.01 to 0.33 ng ml(-1). The influence of the aqueous matrix on the on-line SPE was checked by spiking ground and waste waters. Recoveries varied from 70 to 99% when 10 ml of water sample were enriched. The method was applied to the analysis of some environmental sewage samples. This study confirmed that high concentration levels of aromatic sulfonated compounds can be found in sewage samples. In addition, the stability of the seven studied sulfonated benzene and naphthalene compounds was investigated using on-line polymeric SPE pre-columns, based on the styrene-divinylbenzene polymer PLRP-S. Different storage conditions were tested to carry out the stability survey, which included storage at room temperature, at 4 degrees C and at -20 degrees C, during a period of up to 2 weeks. This study showed that the stability of aromatic sulfonic acids on disposable on-line SPE polymeric pre-columns is related to temperature and that the target compounds are more stable at lower temperatures.