Synthesis,spectral, thermal,and flammability studies of phenolphthalein polyphosphate esters

Polyphosphate esters were synthesized from phenolphthalein and aryl phosphorodichloridates by interfacial polycondensation using a phase transfer catalyst. The polymers were characterized by IR, ¹H-, ¹³C-, and ³¹P-NMR spectroscopy. The molecular weights were calculated by end group analysis using ³¹P-NMR spectral data. The thermal stability of the polymers was studied by thermogravimetry and the flammability was investigated by measuring limiting oxygen index values.     

High-temperature transformations of Cu-rich hydrotalcites

CuM(II)Al ternary hydrotalcites (M(II) = Ni, Co and Mg) with a (Cu+M(II))/Al atomic ratio of 3.0 and Cu/M(II) atomic ratio of 5.0 were synthesized by coprecipitation under low supersaturation. Powder X-ray diffraction of the as-synthesized samples showed a pattern characteristic of hydrotalcite-like (HT-like) structure (JCPDS: 41-1428). Thermal analyses of these samples showed four stages of weight loss/heat change when recorded in nitrogen. Analysis of the evolved gases characterized the nature of these transformations. The thermoanalytical effects differed significantly especially for the high-temperature transformations, when the treatment was performed in oxygen. In situ powder X-ray diffraction of the samples was carried out to elucidate the phase evolution of these compounds. Surprisingly formation of CuO was noted at temperatures around 200°C well below the destruction of the layered network. The nature of the resulting phases varied with both the nature of the co-bivalent metal ion and the heating atmosphere. FT-IR spectroscopy confirmed the retention of carbonate ions at higher temperatures (above 700°C), although the concentration of carbonate anion (most likely unidentate) varied with the calcination temperature. The crystallinity of CuO increased significantly above 600°C, probably through dissociation of copper oxycarbonate. Significant differences in the thermal transformation temperatures (for the third and the fourth transformations) of these samples containing different co-bivalent metal ions were not observed. This suggests that an association of the co-bivalent metal ions and/or trivalent metal ion in this phase is unlikely. A plausible thermal evolution scheme of these hydrotalcites is proposed.     

Synthesis of C60-diphenylaminofluorene dyad with large 2PA cross-sections and efficient intramolecular two-photon energy transfer

The first, highly two-photon active C60 derivative comprised of a A-sp3-D conjugate structure was synthesized showing effective two-photon absorption cross-sections (sigma 2' = 196 x 10(-48) cm4 sec-1 molecule-1) in the nanosecond regime among the best values for diphenylaminofluorene-based AFX chromophores.     

Dithiane additions to vinyl epoxides: steric control over the SN2 and SN2' manifolds

High chemoselectivity can be achieved in the addition of lithium dithiane anions to vinyl epoxides exploiting the steric nature of the dithiane substituent. Unencumbered dithiane anions afford SN2 adducts, whereas sterically encumbered anions lead primarily to SN2' adducts. Furthermore, the SN2' addition occurs syn to the vinyl epoxide.     

Simultaneous Determination of Olanzapine and Fluoxetine by HPLC

A rapid, specific reversed phase HPLC method has been developed for simultaneous determination of olanzapine and fluoxetine in their formulations. Chromatographic separation of these two pharmaceuticals was carried out on an Inertsil C₁₈ reversed phase column (150 mm × 4.6 mm, 5 μm) with a 40:30:30 (v/v/v) mixture of 9.5 mM sodium dihydrogen phosphate (pH adjusted to 6.8 ± 0.1 with triethylamine), acetonitrile and methanol as mobile phase. The flow rate 1.2 mL min⁻¹ and the analytes are monitored at 225 nm. Paroxetine was used as internal standard. The assay results were linear from 25 to 75 μg mL⁻¹ for olanzapine (r ² ≥ 0.995) and 100–300 μg mL⁻¹ for fluoxetine (r ² ≥ 0.995), showed intra- and inter-day precision less than 1.0%, and accuracy of 97.7–99.1% and 97.9–99.0%. LOQ was 0.005 and 0.001 μg mL⁻¹ for olanzapine and fluoxetine, respectively. Separation was complete in less than 10 min. Validation of the method showed it to be robust, precise, accurate and linear over the range of analysis.     

Regioselective nucleophilic addition to carbonyl ylide intermediates: a novel diastereoselective synthesis of cycloalkyl fused furan-3-ones

[structures: see text] A range of cis-fused hexahydro-1-benzofuran-3(2H)-one or tetrahydro-2H-cyclopenta[b]furan-3(3aH)-one ring systems was synthesized by the rhodium(II) acetate catalyzed reaction of alpha-diazo carbonyl compounds in the presence of various oxygen, nitrogen, and sulfur nucleophiles. A double-nucleophilic addition was possible by using an excess of alpha-diazo ketone. These reactions proceeded with complete diastereoselectivity, and the stereochemistry was confirmed by the single-crystal X-ray analysis. This process discloses the first example of tandem cyclization-nucleophilic addition reaction.     

Ab Initio Study and Its Comparison with X-ray Crystal Structure of 4-[1-(4-Chloro-phenylamino)-ethyl] 5-methyl-2-<Emphasis Type="Italic">p</Emphasis>-tolyl-2,4-dihydro-pyrazol-3-one

The ab initio calculation of the title compound was carried out at HF as well as DFT level of theory. The full geometry optimization of the ligand was carried out using 6-31G(d) basis set. The results obtained were correlated with the single crystal X-ray data, also reported in this paper, shows close resemblance between these two. The influence of electron correlation effects also was studied by carrying out geometry optimization at the MP2 level. The attempts were also made to ascertain the most stable tautomer of the said compound.     

Facile and Sensitive Spectrophotometric Determination of Propoxur in Formulations and Environmental Samples

A facile, rapid, and sensitive spectrophotometric method for the determination of propoxur in insecticidal formulations, fortified water, vegetables, agricultural wastewater, and agricultural soil samples has been elaborated. The proposed method is based on the hydrolysis of propoxur under basic conditions, followed by instantaneous azo coupling of the resulting 2‐isopropoxyphenol with the anilines 2a – c . This yielded the orange‐red chromophore 3a (λ_max=at 470 nm), the pale‐red coupling product 3b (490 nm), or the red derivative 3c (478 nm), which are stable for 46 h, 38 h, and 24 h, respectively, and could be readily analyzed spectrophotometrically.     

Dimeric tetrahedral complexes of manganese(II) and iron(II) with benzoyl hydrazones

Summary Dimeric manganese(II)and iron(II)complexes, (ML)₂, derived from benzoyl hydrazones ofo-hydroxyaryl aldehydes and ketones arc described and characterised by elemental analyses and by conductance, molecular weight, magnetic, electronic and i.r. spectral measurements. The dimeric nature of the complexes is revealed by i.r. spectra which show bands atca. 885 Mn²⁺ and 820 cm^–1 Fe²⁺, characteristic of ring vibrations. The i.r. spectra reveal the terdentate nature of the ligands. The electronic spectra in dimethylformamide are consistent with the tetrahedral nature of the complexes. The appreciable lowering in _eff is attributed to the presence of exchange interactions between two paramagnetic atomsvia oxygen bridges.Reprints of this article are not available.