Anisotropic Elastic-Viscoplastic Properties at Finite Strains of Injection-Moulded Low-Density Polyethylene

Injection-moulding is one of the most common manufacturing processes used for polymers. In many applications, the mechanical properties of the product is of great importance. Injection-moulding of thin-walled polymer products tends to leave the polymer structure in a state where the mechanical properties are anisotropic, due to alignment of polymer chains along the melt flow direction. The anisotropic elastic-viscoplastic properties of low-density polyethylene, that has undergone an injection-moulding process, are therefore examined in the present work. Test specimens were punched out from injection-moulded plates and tested in uniaxial tension. Three in-plane material directions were investigated. Because of the small thickness of the plates, only the in-plane properties could be determined. Tensile tests with both monotonic and cyclic loading were performed, and the local strains on the surface of the test specimens were measured using image analysis. True stress vs. true strain diagrams were constructed, and the material response was evaluated using an elastic-viscoplasticity law. The components of the anisotropic compliance matrix were determined together with the direction-specific plastic hardening parameters.     

Long-wavelength Ultraviolet A1 and Visible Light Photoprotection: A Multimodality Assessment of Dose and Response

Human skin is exposed to visible light (VL; 400–700 nm) and long-wavelength ultraviolet A1 (UVA1) radiation (370–400 nm) after the application of organic broad-spectrum sunscreens. The biologic effects of these wavelengths have been demonstrated; however, a dose–response has not been investigated. Ten subjects with Fitzpatrick skin phototype IV-VI were enrolled. Subjects were irradiated with 2 light sources (80–480 J cm⁻²): one comprising VL with less than 0.5% UVA1 (VL+UVA1) and the other pure VL. Skin responses were evaluated for 2 weeks using clinical and spectroscopic assessments. 4-mm punch biopsies were obtained from nonirradiated skin and sites irradiated with 480 J cm⁻² of VL+UVA1 and pure VL 24 h after irradiation. Clinical and spectroscopic assessments demonstrated a robust response at VL+UVA1 sites compared with pure VL. Histology findings demonstrated a statistically significant increase in the marker of inflammation (P < 0.05) and proliferation (P < 0.05) at the irradiated sites compared with nonirradiated control. Threshold doses of VL+UVA1 resulting in biologic responses were calculated. Results indicate that approximately 2 h of sun exposure, which equates to VL+UVA1 dose (~400 J cm⁻²), is capable of inducing inflammation, immediate erythema and delayed tanning. These findings reinforce the need of photoprotection beyond the UV range.     

Photosensitive organic-inorganic hybrid structures based on porous silicon

Abstract

In this study, the photovoltaic organic-inorganic structures were created by deposition of poly(3,4-ethylenedioxythiophene) film doped by poly(styrenesulfonate) and reduced graphene oxide on the porous silicon/silicon substrate. Formation of the hybrid structure was confirmed by means of atomic-force microscopy and Fourier transform infrared spectroscopy. The current-voltage characteristics of the obtained structures were studied. It was found the increase of electrical conductivity and photo-induced signal in organic-inorganic structures. Temporal parameters and spectral characteristics of photoresponse in the 400–1100?nm wavelength range were investigated. The widening of spectral photosensitivity in a short-wavelength range due to light absorption in various layers of the multijunction structure in comparison with single crystal silicon was revealed.     

Statistical Model of the Explosive Fragmentation of a Ring

A model of the explosive fragmentation of a thin ring is developed which takes into account the statistical dispersion of the relative fracture deformation along the length of the ring. A formula is proposed for calculating the velocity of the boundary of the region near a plastic rupture in which the plastic flow of the ring material ceases. Methods for the numerical and analytical calculation of the average number of fragments of the ring are developed. The calculation results are compared with available experimental data.     

Modelling pH-Dependent and Microstructure-Dependent Streaming Potential Coefficient and Zeta Potential of Porous Sandstones

In this paper, we have significantly modified an existing model for calculating the zeta potential and streaming potential coefficient of porous media and tested it with a large, recently published, high-quality experimental dataset. The newly modified model does not require the imposition of a zeta potential offset but derives its high salinity zeta potential behaviour from Stern plane saturation considerations. The newly modified model has been implemented as a function of temperature, salinity, pH, and rock microstructure both for facies-specific aggregations of the new data and for individual samples. Since the experimental data include measurements on samples of both detrital and authigenic overgrowth sandstones, it was possible to model and test the effect of widely varying microstructural properties while keeping lithology constant. The results show that the theoretical model represents the experimental data very well when applied to model data for a particular lithofacies over the whole salinity, from 10^?5 to 6.3 mol/dm³, and extremely well when modelling individual samples and taking individual sample microstructure into account. The new model reproduces and explains the extreme sensitivity of zeta and streaming potential coefficient to pore fluid pH. The low salinity control of streaming potential coefficient by rock microstructure is described well by the modified model. The model also behaves at high salinities, showing that the constant zeta potential observed at high salinities arises from the development of a maximum charge density in the diffuse layer as it is compressed to the thickness of one hydrated metal ion.     

Study of the effect of properties of material on vacuum breakdown initiated by laser radiation

In this work, the effect of various properties of materials on vacuum breakdown initiated by laser radiation is considered. Estimating calculations are performed which show that the material of the target electrode distinctly affects the minimum energy of laser radiation needed for igniting a vacuum spark. The experimental studies carried out confirm the estimating calculations, and a number of materials are revealed which can be arranged in order of increase in the energy needed for the formation of breakdown in vacuum by the impact of a laser pulse.