重氮树脂接枝罗丹明B聚合物对酸、碱的响应性

利用重氮树脂(DR)中N2+的光解特性,通过罗丹明(B(RhB))对重氮树脂的接枝反应,得到了染料功能化的接枝聚合物DR-g-RhB,并由傅里叶红外光谱、1H-NMR、紫外-可见吸收光谱和荧光光谱等分析方法确认了产物结构。结果表明DR-g-RhB具有良好的热稳定性,失重5%所对应的温度超过360°C。通过溶液涂敷法形成的薄膜在不同酸碱度溶液中的UV-Vis吸收光谱会随浸入时间产生规律性变化:在pH=7.0的水中,吸光值基本不随时间变化;而在pH=12.0的肼水溶液中,吸光值随时间先下降、再增加;但在酸中则持续增加,而且对盐酸(pH=2.0)的响应比对醋酸(pH=2.3)更灵敏。     

Synthesis of MnO2/MWNTs Nanocomposites Using a Sonochemical Method and Application for Hydrazine Detection

A sonochemical method has been successfully used to synthesize MnO₂/MWNTs nanocomposites. The structure and nature of the resulting MnO₂/MWNTs composite were characterized by scanning electron microscopy (SEM), energy‐dispersive X‐ray diffraction (EDX), X‐ray photoelectron spectroscopy (XPS).The results show that the sonochemically synthesized MnO₂ nanoparticles were homogeneously dispersed on the modified MWNT surfaces. The performance of the MnO₂/MWNTs nanocomposites modified electrode was characterized using cyclic voltammetry (CV) and Nyquist plots. The electrode exhibits efficient electron transfer ability and high electrochemical response towards hydrazine. This may be attributed to the small particle size, high dispersion of MnO₂ particles. The fabricated hydrazine sensor showed a wide linear range of 5.0×10^?7–1.0×10^?3 M with a response time less than 5 s and a detection limit of 0.2 μM. Taking the advantage of the unique properties of both MWNTs and MnO₂, it would greatly broaden the applications of MWNTs and MnO₂.     

Synthesis and Characterization of Chromium Hexacyanoferrate/Multiwalled Carbon Nanotube Composite and Its Biosensing for L‐Cysteine

This work describes the electrochemical properties of glassy carbon electrodes (GCE) modified with chromium(III) hexacyanoferrate(II) (Crhf) nanoparticles attached multiwalled carbon nanotube (MWNTs). The morphological characterization of Crhf/MWNTs nanocomposites was examined by scanning electron microscopy (SEM), UV‐vis spectroscopy, and Fourier transform infrared spectrometry (FT‐IR). The electrocatalytic activity of these nanocomposites was investigated and showed a good electrocatalytic effect for oxidation of L ‐cysteine (L ‐Cys) in 0.1 M phosphate buffer solution (pH 3.0). Under optimum conditions linear calibration graphs were obtained over the L ‐Cys concentration range 5.0×10^?7 to 6.0×10^?5 M with a correlation coefficient of 0.9998 and a detection limit (signal‐to‐noise ratio was 3) of 1.0×10^?8 M. The proposed method is simple and it also showed excellent sensitivity and stability. The excellent electrocatalytic ability of the modified electrode towards L ‐Cys manifests that the Crhf/MWNTs can provide a new platform for biosensors and other biology.     

Sesquiterpenes and Other Metabolites from the Marine Red Alga Laurencia composita (Rhodomelaceae)

Two new halogenated sesquiterpenes, (8β)‐10‐bromo‐3‐chloro‐2,7‐epoxychamigr‐9‐en‐8‐ol ( 1 ) and 2‐bromo‐3‐chlorobisabola‐7(14),11‐diene‐6,10‐diol ( 3 ), and one new phytol‐derived diterpene, 2,3‐epoxyphytyl acetate ( 4 ), along with cis‐ and trans‐1‐methylcyclohexane‐1,4‐diol ( 5 and 6 ) which were isolated from a natural source for the first time but have been previously synthesized, were isolated from the marine red alga Laurencia composita and characterized. In addition, a known sesquiterpene, pacifenediol ( 2 ), and the known furanone derivative 7 were also identified. Their structures were established by NMR and mass spectroscopic methods.     

Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering

This study focused on the fabrication of calcium phosphate (Ca-P)/poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanocomposite scaffolds loaded with biomolecules using the selective laser sintering (SLS) technique and their evaluation. Ca-P/PHBV nanocomposite microspheres loaded with bovine serum albumin (BSA) as the model protein were fabricated using the double emulsion solvent evaporation method. The encapsulation efficiency of BSA in PHBV polymer microspheres and Ca-P/PHBV nanocomposite microspheres were 18.06 ± 0.86% and 24.51 ± 0.60%, respectively. The BSA loaded Ca-P/PHBV nanocomposite microspheres were successfully produced into three-dimensional porous scaffolds with good dimensional accuracy using the SLS technique. The nanocomposite microspheres served as protective carriers and maintained the bioactivity of BSA during SLS. The effects of SLS parameters such as laser power and scan spacing on the encapsulation efficiency of BSA in the scaffolds and in vitro BSA release were studied. An initial burst release was observed, which was followed by a slow release of BSA. After 28-day release, The PHBV matrix was slightly degraded after 28-day in vitro release study. It was shown that nanocomposite scaffolds with controlled architecture obtained via SLS could be incorporated with biomolecules, enhancing them with more functions for bone tissue engineering application or making them suitable for localized delivery of therapeutics.     

Effect of acetic acid on CO2 corrosion of carbon steel in NaCl solution

Potentiodynamic sweep and electrochemical impedance spectroscopy measurements were applied to investigate the effects of both temperature and acetic acid (HAc) on the anodic and cathodic reactions in CO₂ corrosion of P110 steel in 3.5% NaCl solution. The temperatures were controlled at 30 and 60 °C. The concentrations of HAc were controlled at 0, 1000, 3000 and 5000 ppm. In this work, the corrosion parameters of polarization curves, such as corrosion potential (E_corr), corrosion current density (i_corr), and anodic and cathodic branch slopes (b_a and b_c), are presented and discussed in detail. In addition, the equivalent circuit models and ZsimpWin software were utilized to discuss the Nyquist plots. The plots showed that the E_corr values shifted in the positive direction as the HAc concentration increased. The i_corr values increased with the increase in HAc concentration, indicating that HAc could accelerate the corrosion. The impedance spectra measured at 30 and 60 °C have different time constants and characterization. The coverage fraction θ and the thickness L of corrosion film are two most important controlled variables that influence and control the CO₂ corrosion mechanisms. Copyright © 2010 John Wiley & Sons, Ltd.     

Fabrication of prussian blue/multi-walled carbon nanotubes modified electrode for electrochemical sensing of hydroxylamine

We are presenting a sensor for hydroxylamine that is based on an glassy carbon electrode modified with nanoparticles of Prussian Blue and with multi-walled carbon nanotubes (MWCNTs). The sensing material was synthesized using a mixture of ferric chloride and potassium ferricyanide solution in the presence of MWCNTs under ambient conditions. Characterization was done by scanning electron microscopy, UV-vis spectroscopy, Fourier transform infrared absorption spectrum and cyclic voltammetry. The modified electrode showed two well-defined pairs of redox peaks and dramatic catalytic activity towards the electro-oxidation of hydroxylamine with a linear response ranging from 1.5 µM to 2.0 mM. In addition, tests show the sensor exhibited outstanding stability and reproducibility.     

Chemical Characterization of Phenolic Compounds in Erigeron Injection by Rapid-Resolution LC Coupled with Multi-Stage and Quadrupole-TOF-MS

Rapid-resolution liquid chromatography coupled with electrospray ion trap multistage mass spectrometry (ESI-MS ⁿ ) and electrospray quadrupole-time-of-flight mass spectrometry (ESI-Q-TOF) has been utilized to separate and characterize the phenolic components in Erigeron injections. After extensive separation on the column, each peaks’ potential structures were obtained based on their accurate mass supplied by ESI-Q-TOF and chemical database retrieval, and confirmed by ESI-MS ⁿ . A total of 44 compounds were identified or tentatively characterized and fifteen of them reported for the first time. In addition, the developed method was applied to monitor the elimination of phenolic compounds in rats after intravenous administration of 4 mL kg^?1 Erigeron injection. The caffeoylquinic acids and flavonoids of the Erigeron injection were quickly degraded and most of them reached the low limit of detection (SNR < 3) at 2 h post-injection.     

Derivatization and Determination of MCPA in Soil by GC

A reliable and sensitive method for determination of MCPA in soil by derivatization through p-toluenesulfonic acid and 1,3-dichloro-2-propanol followed by gas chromatographic detection under ECD mode has been established. After treatment with hydrochloric acid, the soil samples were directly extracted without any clean-up with dichloromethane by vortexing. After derivatization and liquid–liquid extraction, the product was subjected to GC analysis. Under optimized conditions, recovery of MCPA reached 87–91%; intra- and inter-day precision values were recorded in the range 3.4–6.4% and 7.4–8.7%, respectively. Excellent linear relationship was observed within 0.1–10 μg mL^?1 (0.005–0.5 mg kg^?1) with linear correlation coefficient (R) of 0.9997. The LOD and LOQ were 0.001 and 0.0026 mg kg^?1, respectively, and the overall sensitivity for detection was found to be in the same range as with the conventional GC-MS technique.     

Gene Cloning,Expression, and Characterization of a Family 51 α-<Emphasis Type="SmallCaps">l</Emphasis>-Arabinofuranosidase from <Emphasis Type="Italic">Streptomyces</Emphasis> sp. S9

An α-l-arabinofuranosidase gene, abf51S9, was cloned from Streptomyces sp. S9 and successfully expressed in Escherichia coli BL21 (DE3). The full-length gene consisted of 1,506 bp and encoded 501 amino acids with a calculated mass of 55.2 kDa. The deduced amino acid sequence was highly homologous with the α-l-arabinofuranosidases belonging to family 51 of the glycoside hydrolases. The recombinant protein was purified to electrophoretic homogeneity by Ni-NTA affinity chromatography and subsequently characterized. The optimal pH and temperature for the recombinant enzyme were 6.0 and 60∼65 °C, respectively. The enzyme showed a broad pH range of stability, retaining over 75% of the maximum activity at pH 5.0 to 11.0. The specific activity, K _m, and V _max with p-nitrophenyl-α-l-arabinofuranoside as substrate were 60.0 U mg⁻¹, 1.45 mM, and 221 μmol min⁻¹ mg⁻¹, respectively. Abf51S9 showed a mild but significant synergistic effect in combination with xylanase on the degradation of oat-spelt xylan and soluble wheat arabinoxylan substrates with a 1.19- and 1.21-fold increase in the amount of reducing sugar released, respectively. These favorable properties make Abf51S9 a good candidate in various industrial applications.