Development of an integrated optical system for warpage and hermeticity test of microdisplay

We have developed an integrated optical system to measure the warpage of a microdisplay product at post-packaging die-attach temperature and to test its hermeticity after manufacturing. This system is constructed based on the principle of Twyman/Green (T/G) interferometry and Newton interferometry. T/G interferometry is used to characterize warpage of the microdisplay's base-plate, while Newton interferometry is used to characterize the gap variance between face-plate and base-plate of the microdisplay. With these measurements, deformation and shape of the microdisplay can be comprehensively determined during its manufacturing process, which is critical for its quality test and reliability evaluation. Delicate mechanical system was designed to facilitate the optics integration and alignment. To evaluate the performance of the optical system itself, warpage of a sample was re-measured with Tailor–Hobson profilometer whose resolution is 10 nm, the results from these two testing systems agree well with each other. Some application examples of the integrated testing system were presented to verify its work efficiency.     

From Lignin‐derived Aromatic Compounds to Novel Biobased Polymers

Nowadays, the synthesis of (semi)aromatic polymers from lignin derivatives is of major interest, as aromatic compounds are key intermediates in the manufacture of polymers and lignin is the main source of aromatic biobased substrates. Phenols with a variety of chemical structures can be obtained from lignin deconstruction; among them, vanillin and ferulic acid are the main ones. Depending on the phenol substrates, different chemical modifications and polymerization pathways are developed, leading to (semi)aromatic polymers covering a wide range of thermomechanical properties. This review discusses the synthesis and properties of thermosets (vinyl ester resins, cyanate ester, epoxy, and benzoxazine resins) and thermoplastic polymers (polyesters, polyanhydrides, Schiff base polymers, polyacetals, polyoxalates, polycarbonates, acrylate polymers) prepared from vanillin, ferulic acid, guaiacol, syringaldehyde, or 4‐hydroxybenzoic acid.

     

Total microcystins analysis in water using laser diode thermal desorption-atmospheric pressure chemical ionization-tandem mass spectrometry

A new approach for the analysis of the cyanobacterial microcystins (MCs) in environmental water matrices has been developed. It offers a cost efficient alternative method for the fast quantification of total MCs using mass spectrometry. This approach permits the quantification of total MCs concentrations without requiring any derivatization or the use of a suite of MCs standards. The oxidation product 2-methyl-3-methoxy-4-phenylbutyric acid (MMPB) was formed through a Lemieux oxidation and represented the total concentration of free and bound MCs in water samples. MMPB was analyzed using laser diode thermal desorption-atmospheric pressure chemical ionization coupled to tandem mass spectrometry (LDTD-APCI-MS/MS). LDTD is a robust and reliable sample introduction method with ultra-fast analysis time (<15 s sample⁻¹). Several oxidation and LDTD parameters were optimized to improve recoveries and signal intensity. MCs oxidation recovery yield was 103%, showing a complete reaction. Internal calibration with standard addition was achieved with the use of 4-phenylbutyric acid (4-PB) as internal standard and showed good linearity (R² > 0.999). Limits of detection and quantification were 0.2 and 0.9 μg L⁻¹, respectively. These values are comparable with the WHO (World Health Organization) guideline of 1 μg L⁻¹ for total microcystin-LR congener in drinking water. Accuracy and interday/intraday variation coefficients were below 15%. Matrix effect was determined with a recovery of 91%, showing no significant signal suppression. This work demonstrates the use of the LDTD-APCI-MS/MS interface for the screening, detection and quantification of total MCs in complex environmental matrices.     

Tracing sewage water by 15N in a mangrove ecosystem to test its bioremediation ability

Mangrove forests could be a simple and effective alternative to conventional sewage treatment, particularly for island communities given its low cost and low maintenance. Due to their high adaptation capacity, these plants are able to tolerate and bioremediate the high levels of nutrients and pollutants found in sewage water. This solution could be applied to small tropical islands with high population density such as Mayotte in the Indian Ocean. This paper reports on a trial by stable isotopic (15)N tracing of such a bioremediation process on pre-treated wastewater near the village of Malamani, in the middle of the large coastal mangrove in the bay near Chirongui. The first results show a boost in the mangrove growth, but a longer period of observation is needed to confirm the beneficial effects, and also to clarify the role of the local crab population, whose engineering activities play an important part in the ecosystem. The exact denitrification process is not yet understood, and the mass balance equation also reveals loss of nitrogen-containing compounds, which needs to be analyzed more closely.     

Bubbles navigating through networks of microchannels

This paper describes the behavior of bubbles suspended in a carrier liquid and moving within microfluidic networks of different connectivities. A single-phase continuum fluid, when flowing in a network of channels, partitions itself among all possible paths connecting the inlet and outlet. The flow rates along different paths are determined by the interaction between the fluid and the global structure of the network. That is, the distribution of flows depends on the fluidic resistances of all channels of the network. The movement of bubbles of gas, or droplets of liquid, suspended in a liquid can be quite different from the movement of a single-phase liquid, especially when they have sizes slightly larger than the channels, so that the bubbles (or droplets) contribute to the fluidic resistance of a channel when they are transiting it. This paper examines bubbles in this size range; in the size range examined, the bubbles are discrete and do not divide at junctions. As a consequence, a single bubble traverses only one of the possible paths through the network, and makes a sequence of binary choices ("left" or "right") at each branching intersection it encounters. We designed networks so that, at each junction, a bubble enters the channel into which the volumetric flow rate of the carrier liquid is highest. When there is only a single bubble inside a network at a time, the path taken by the bubble is, counter-intuitively, not necessarily the shortest or the fastest connecting the inlet and outlet. When a small number of bubbles move simultaneously through a network, they interact with one another by modifying fluidic resistances and flows in a time dependent manner; such groups of bubbles show very complex behaviors. When a large number of bubbles (sufficiently large that the volume of the bubbles occupies a significant fraction of the volume of the network) flow simultaneously through a network, however, the collective behavior of bubbles-the fluxes of bubbles through different paths of the network-can resemble the distribution of flows of a single-phase fluid.     

New ammonium surfactant-stabilized rhodium(0) colloidal suspensions: influence of novel counter-anions on physico-chemical and catalytic properties

Novel anionic species, such as hydrogen carbonate (HCO(3)(?)), fluoride (F(?)), triflate (CF(3)SO(3)(?)), tetrafluoroborate (BF(4)(?)) and chloride (Cl(?)) were investigated as new partners of water soluble N,N-dimethyl-N-cetyl-N-(2-hydroxyethyl) ammonium salts, used as a protective agent of rhodium colloids. The effect of the surfactant polar head on the micellar behavior, size and morphology of the nanospecies was studied by adapted physico-chemical experiments (surface tension measurements, dynamic light scattering, thermogravimetric and TEM analyses) and discussed in terms of strong or weak stabilization of the growing nanoparticles surface. Finally, the influence of the nanoenvironment generated by the surfactant with various counter-anions was evaluated via the hydrogenation of aromatics.     

Fe3O4 nanoparticle-supported copper(I) pybox catalyst: magnetically recoverable catalyst for enantioselective direct-addition of terminal alkynes to imines

An Fe(3)O(4) nanoparticle-supported copper(I) pybox catalyst, which exhibits excellent reactivity and yields products with good enantioselectivity, was developed. As a proof of concept, six optically active propargyl amines were obtained in excellent yields. The catalyst can be magnetically removed and recycled easily six times without a decrease in activity or enantioselectivity.     

Development of an efficient protein phosphatase-based colorimetric test for okadaic acid detection

Okadaic acid (OA), responsible for gastrointestinal problems, inhibits protein phosphatase 2A (PP2A). Therefore, the inhibition exerted by the toxin on PP2A could be used to detect the presence of OA in aqueous solution and in shellfish sample.In this work, two commercial PP2As (from ZEU Immunotec and Millipore) and one produced by molecular engineering (from GTP Technology) were tested. Enzymes were used in solution and also immobilized within a polymeric gel. In solution, best performances were obtained using PP2A purchased from ZEU Immunotec (Spain). OA was detected in aqueous solution in concentration as low as 0.0124 μg L⁻¹ using the enzyme from ZEU Immunotec whereas the detection limits were 0.47 μg L⁻¹ and 0.123 μg L⁻¹ with PP2As from Millipore and GTP Technology, respectively. Considering that the immobilization step contributes to stabilize the PP2A activity, enzymes were entrapped within a photopolymer and an agarose gel. These different polymeric matrices were optimized, tested and compared. Agarose gel seems to be a good alternative to the photopolymer largely used in our group. For instance, the IC₅₀ value obtained with the test based on PP2A from ZEU Immunotec immobilized within an agarose gel was 1.98 μg L⁻¹. This value was 1.8-fold lower than those obtained with the photopolymer test using the same enzyme. The proposed test is sensitive, fast and does not require expensive equipment. To evaluate the efficiency of the assay, PP inhibition tests based on PP2A from ZEU Immunotec in solution or immobilized within a gel were used for OA detection in contaminated shellfish.     

Inhomogeneous fluids of colloidal hard dumbbells: fundamental measure theory and Monte Carlo simulations

Recently, a density functional theory for hard particles with shape anisotropy was developed, the extended deconvolution fundamental measure theory (edFMT). We apply edFMT to hard dumbbells, arguably the simplest non-convex shape and readily available experimentally in the form of colloids. We obtain good agreement between edFMT and Monte Carlo simulations for fluids of dumbbells in a slit and for the same system under gravity. This indicates that edFMT can be successfully applied to nearly all colloidal shapes, not just for the convex shapes for which edFMT was originally derived. A theory, such as edFMT, that allows a fast and general way of mapping the phase behavior of anisotropic colloids, can act as a useful guide for the design of colloidal shapes for various applications.     

Phase behavior of hard colloidal platelets using free energy calculations

We investigate the phase behavior of a model for colloidal hard platelets and rigid discotic molecules: oblate hard spherocylinders (OHSC). We perform free energy calculations using Monte Carlo simulations to map out the phase diagram as a function of the aspect ratio L∕D of the particles. The phase diagram displays a stable isotropic phase, a nematic liquid crystal phase for L∕D≤0.12, a columnar phase for L∕D?0.3, a tilted crystal phase for L?0.45, and an aligned crystal phase for L∕D?0.45. We compare the results to the known phase diagram of hard cut spheres. Thin cut spheres are almost cylinder-shaped, while the interactions between real discotic mesogens and colloidal platelets are more consistent with the toroidal rims of the OHSC. Since the shapes of the OHSC and the cut spheres are otherwise similar, the phase diagrams of the two types of particles are quite akin. However, the tilted crystal phase for OHSC, which is of a crystal type that is frequently found in experiments on disklike molecules, has not been found for hard cut spheres. Furthermore, although we have found a cubatic phase, it was shown to be definitely unstable, whereas the stability of the cubatic phase of cut spheres is still disputed. Finally, we also show that the phase boundaries differ significantly from those for cut spheres. These are remarkable consequences of a subtle change in particle shape, which show that for a detailed comparison with the phase behavior of experimental particles, the OHSC should be used as a model particle.