Measurement of k 0 values for caesium and iridium

The OPAL research reactor in Australia has been used to determine k ₀ values for ^134mCs, ¹³⁴Cs, ¹⁹²Ir and ¹⁹⁴Ir. Values for ²⁴Na have also been measured for quality control. The neutron flux at the irradiation positions was very highly thermalised (f > 2,000), resulting in almost negligible activation by epithermal neutrons. As a consequence, the contribution to the total uncertainty of the k ₀ values from epithermal-related factors such as Q ₀ and $ \bar{E}_{\text{r}} $ was very small. The measured caesium k ₀ values have been compared with the library values as well as with recent measurements by St Pierre et al. and Farina Arboccò et al. While there are k ₀ values for ¹⁹⁴Ir in the library, no ¹⁹²Ir values have been measured previously. Despite ¹⁹²Ir having a higher sensitivity than ¹⁹⁴Ir, k ₀ values were not measured during the establishment of the k ₀-method because the nuclear data available at the time indicated that the activation cross-section of ¹⁹¹Ir deviated significantly from 1/v behaviour (g(T _n ) ≠ 1), which would result in unacceptable errors if k ₀ analysis were to be carried out using the Høgdahl convention. However later nuclear data compilations showed that ¹⁹¹Ir has better 1/v behaviour than previously reported, making it suitable for k ₀ analysis using the Høgdahl convention. For completeness, k ₀ values have been determined using both the Høgdahl and modified-Westcott conventions and these have been compared with library (¹⁹⁴Ir) and calculated values.     

Enantioselective Michael additions of aldehydes to nitroalkenes catalyzed with ionically tagged organocatalyst

Enantioselective organocatalytic Michael additions affords useful building blocks for many biologically and medicinally relevant compounds. Ionically-tagged diphenylprolinol silyl ether efficiently catalyzes several Michael additions of aldehydes to nitroalkenes in ionic liquids. The Michael additions work well in ionic liquids; yields up to 95% and enantioselectivities up to 95% ee were achieved. Furthermore, in some cases, the catalytic system was reusable.      

Benchmark ab initio proton affinity and gas-phase basicity of α-alanine based on coupled-cluster theory and statistical mechanics

We determine the proton affinity (PA) and gas-phase basicity (GB) of amino acid α-alanine at a chemically accurate level by performing explicitly-correlated CCSD(T)-F12b/aug-cc-pVDZ geometry optimizations and normal mode vibrational frequency calculations as well as CCSD(T)-F12b/aug-cc-pVTZ energy computations at the possible neutral and protonated geometries. Temperature effects at 298.15 K considering translational, rotational, and vibrational enthalpy and entropy corrections are obtained via standard statistical mechanics utilizing the molecular geometries and the harmonic vibrational energy levels. Both the amino nitrogen (N) and the carbonyl oxygen (O) atoms are proven to be potential protonation sites and a systematic conformational search reveals 3 N- and 9 O-protonated conformers in the 0.00–7.88 and 25.43–30.43 kcal/mol energy ranges at 0 K, respectively. The final computed PA and GB values at (0)298.15 K in case of N-protonation are (214.47)216.80 and 207.07 kcal/mol, respectively, whereas the corresponding values for O-protonation are (189.04)190.63 and 182.31 kcal/mol. The results of the benchmark high-level coupled-cluster computations are utilized to assess the accuracy of several lower-level cost-effective methods such as MP2 and density functional theory with various functionals (SOGGA11-X, M06-2X, PBE0, B3LYP, M06, TPSS).     

Low volatile monofunctional reactive diluents for radiation curable formulations

In the last decades the importance of UV curable formulations has increased continuously. Their fast curing speed, solvent-free polymerization conditions, and the formation of hard and highly crosslinked photopolymer networks represent major benefits. Commercial UV resins generally consist of multi-functional vinyl oligomers, photoinitiators, additives, and reactive diluents. Mono- and multi-functional reactive diluents serve as thinners to lower the overall resin viscosity and to improve processability. However, many monofunctional reactive diluents like isobornyl (meth)acrylate or benzyl (meth)acrylate exhibit high volatility, often already at room temperature. This causes adverse effects such as unpleasant odor, potential health risks, and changing resin composition during processing. A new group of monomers that show high potential for replacing traditional highly volatile reactive diluents are salicylate (meth)acrylates. In this work, salicylate-based thinners are synthesized, polymerized, and characterized with respect to their viscosity, volatility, thermal stability, photoreactivity, and thermomechanical properties of their homopolymers. Additionally, a first example of their diluting effect in a highly viscous difunctional polyester urethane methacrylate is demonstrated with 30 wt% of a cycloaliphatically and an aromatically substituted salicylate methacrylate. The polymers of the diluted resin exhibit similarly high glass transition temperatures of 110 and 126 °C, which are in the range of the polymers of the undiluted resin.     

First-principles prediction and partial characterization of the vibrational states of water up to dissociation

A new, accurate, global, mass-independent, first-principles potential energy surface (PES) is presented for the ground electronic state of the water molecule. The PES is based on 2200 energy points computed at the all-electron aug-cc-pCV6Z IC-MRCI(8,2) level of electronic structure theory and includes the relativistic one-electron mass-velocity and Darwin corrections. For H₂¹⁶O, the PES has a dissociation energy of D₀ = 41 109 cm⁻¹ and supports 1150 vibrational energy levels up to 41 083 cm⁻¹. The deviation between the computed and the experimentally measured energy levels is below 15 cm⁻¹ for all the states with energies less than 39 000 cm⁻¹. Characterization of approximate vibrational quantum numbers is performed using several techniques: energy decomposition, wave function plots, normal mode distribution, expectation values of the squares of internal coordinates, and perturbing the bending part of the PES. Vibrational normal mode labels, though often not physically meaningful, have been assigned to all the states below 26 500 cm⁻¹ and to many more above it, including some highly excited stretching states all the way to dissociation. Issues to do with calculating vibrational band intensities for the higher-lying states are discussed.     

Aeroacoustics research in Europe: The CEAS-ASC report on 2010 highlights

The Council of European Aerospace Societies (CEAS) Aeroacoustics Specialists Committee (ASC) supports and promotes the interests of the scientific and industrial aeroacoustics community on an European scale and European aeronautics activities internationally. In this context, “aeroacoustics” encompasses all aerospace acoustics and related areas. Each year the committee highlights some of the research and development projects in Europe.This paper is a report on highlights of aeroacoustics research in Europe in 2010, compiled from information provided to the ASC of the CEAS.At the end of 2010, project X-NOISE EV of the Seventh Framework Programme of the European Commission has been launched as a continuation of the X-Noise series, with objectives of reducing aircraft noise and reaching the goal set by the ACARE 2020 Vision.Some contributions submitted to the editor summarizes selected findings from European projects launched before or concluded in 2010, while other articles cover issues supported by national associations or by industries. Furthermore, a concise summary of the workshop on “Aeroacoustics of High-Speed Aircraft Propellers and Open Rotors” held in Warsaw in October is included in this report.Enquiries concerning all contributions should be addressed to the authors who are given at the end of each subsection.     

Microwave-assisted selective protection of glutaraldehyde and its symmetrical derivatives as monoacetals and -thioacetals

Six monoprotected acetals and -thioacetals of glutaradehyde and its symmetrical dimethyl derivatives were synthesized. Microwave-assisted heating proved to be a substantially more selective method for monoprotection than conventional heating. All reactions were efficient and only traces of diprotected material were formed.     

Hexane dehydrogenation to hexenes: a general indicator for deactivation of Pt catalysts in “skeletal” reactions

The comparative evaluation of dehydrogenation yields and selectivities of skeletal reactions from n-hexane reactions on monofunctional Pt catalysts is a good universal indicator of catalyst deactivation, independently of the presence and the nature of the support. Four regions could be defined with increasing carbon accumulation, causing "beneficial", "selective", "nonselective" and "severe" deactivation.     

Noise-enhanced human balance control

Noise can enhance the detection and transmission of weak signals in certain nonlinear systems, via a mechanism known as stochastic resonance. Here we show that input noise can be used to improve motor control in humans. Specifically, we show that the postural sway of both young and elderly individuals during quiet standing can be significantly reduced by applying subsensory mechanical noise to the feet. We further demonstrate with input noise a trend towards the reduction of postural sway in elderly subjects to the level of young subjects. These results suggest that noise-based devices, such as randomly vibrating shoe inserts, may enable people to overcome functional difficulties due to age-related sensory loss.