A rapid and highly selective method for the estimation of pyro-, tri- and orthophosphates

A rapid, highly selective and simple method has been developed for the quantitative determination of pyro-, tri- and orthophosphates. The method is based on the formation of a solid complex of bis(ethylenediamine)cobalt(III) species with pyrophosphate at pH 4.2-4.3, with triphosphate at pH 2.0-2.1 and with orthophosphate at pH 8.2-8.6. The proposed method for pyro- and triphosphates differs from the available method, which is based on the formation of an adduct with tris(ethylenediamine)cobalt(III) species. The complexes have the composition [Co(en)(2)HP(2)O(7)]4H(2)O and [Co(en)(2)H(2)P(3)O(10)]2H(2)O, respectively. The precipitation is instantaneous and quantitative under the recommended optimum conditions giving 99.5% gravimetric yield in both cases. There is no interferences from orthophosphate, trimetaphosphate and pyrophosphate species in the triphosphate estimation up to 5% of each component. The efficacy of the method has been established by determining pyrophosphate and triphosphate contents in various matrices. In the case of orthophosphate, the proposed method differs from the available methods such as ammonium phosphomolybdate, vanadophosphomolybdate and quinoline phosphomolybdate, which are based on the formation of a precipitate, followed by either titrimetry or gravimetry. The precipitation is instantaneous and the method is simple. Under the recommended pH and other reaction conditions, gravimetric yields of 99.6-100% are obtainable. The method is applicable to orthophosphoric acid and a variety of phosphate salts.     

Conformational analysis and electronic structure of monothiodiacetamide: Normal coordinate analysis and molecular orbital study

The infrared spectra of monothiodiacetamide (MTDA, CH₃CONHCSCH₃) and its N-deuterated compound in solution, solid state and at low temperature are measured. Normal coordinate analysis for the planar vibrations ofMTDA-d ₀ and –d ₁ have been performed for the two most probablecis-trans-CONHCS-or-CSNHCO-conformers using a simpleUrey-Bradley force function. The conformation ofMTDA derived from the vibrational spectra is supported by the all valence CNDO/2 molecular orbital method. The vibrational assignments and the electronic structure ofMTDA are also given.

---

Konformationsanalyse und elektronische Struktur von Monothiodiacetamid. Normalkoordinatenanalyse und MO-Studie

Zusammenfassung Das Infrarotspektrum von Monothiodiacetamid (MTDA, CH₃CONHCSCH₃) und der entsprechenden N-deuterierten Derivate wurde in Lösung, im Festzustand und bei tiefer Temperatur gemessen. Die Normalkoordinatenanalyse der möglichen planaren Konformeren wurde mittels einer einfachenUrey-Bradley-Funktion durchgeführt. Die dabei abgeleitete Konformation vonMTDA steht im Einklang mit einer semiempirischen quantenchemischen Rechnung (CNDO/2). Die Zuordnung der Schwingungen und die Elektronendichteverteilung inMTDA werden angegeben.

     

Reactivity ratios for the oxidative copolymerizations of indene with methyl methacrylate and methacrylonitrile

The copolyperoxides of indene with methyl methacrylate and methacrylonitrile have been synthesized by the free-radical-initiated oxidative copolymerization of indene and the monomers. The compositions of copolyperoxides, obtained from 1H and 13C NMR spectra, have been utilized to determine the reactivity ratios. The reactivity ratios indicate that the copolyperoxides contain a large proportion of the indene units in random placement. Thermal degradation studies of the copolyperoxides by differential scanning calorimetry and electron-impact mass spectroscopy support alternating peroxide units in the copolyperoxide chain. The energy of activation for thermal degradation suggests that the degradation is controlled by the dissociation of the peroxide (-O-O-) bonds in the copolyperoxide chain. The flexibility of copolyperoxide in terms of glass transition temperature (T_g) has also been examined.     

Thermal Analysis Studies on Hydroxobridged Homo and Hetero Trinuclear Cobalt(III) Complexes

The synthesis and thermal analysis studies of several hydroxobridged homo and hetero trinuclear cobalt(III) complexes are reported. The complexes are of the type [M(H₂O)_x{(OH)₂Co(en)₂}₂](SO₄)₂ nH₂O and [M(H₂O)_x{(OH)₂Co(NH₃)₄}₂](SO₄)₂nH₂O where en denotes ethylenediamine and M =Co(II), Ni(II), Cu(II) and Zn(II) with x=0 for Cu(II), and 2 for other metal ions, and n =3, 4 or 5. The TG and DTA studies of these compounds show that one or more intermediate compounds are formed in each case before the metal oxides are produced.     

Ab initio studies of solvent effect on molecular conformation and vibrational spectra of diacetamide

The conformational equilibria and vibrational spectra of diacetamide have been investigated by ab initio molecular orbital studies using the basis sets 6-31g(d,p) and 6-31++g(d,p) at Hartree-Fock and MP2 levels. The vibrational spectra of diacetamide have been satisfactorily interpreted taking into consideration the agreement between the calculated harmonic vibrational frequencies, infrared and Raman band intensities and shifts in deuterated molecules with those observed. The solvent effects were investigated by the self-consistent reaction field (SCRF) theory. The effect of solvent on the conformational equilibria and vibrational spectra is discussed. The calculated changes in the geometry and vibrational spectra on going from the gas phase to the solvent medium are in accord with the increasing weight of the dipolar resonance structure of the amide group in more polar solvents.     

Stability-indicating HPLC method development and validation for simultaneous estimation of metformin,dapagliflozin, and saxagliptin in bulk drug and pharmaceutical dosage form

A simple, precise, and rapid stability-indicating reversed-phase-HPLC method was developed and validated for the estimation of metformin (MET), dapagliflozin (DAP), and saxagliptin (SAX) combination in bulk and tablet dosage forms. The proposed method uses a Kromasil C18 column (150 × 4.6 mm, 5 μm) with column oven temperature of 30°C and mobile phase containing a mixture of 60% phosphate buffer (pH = 3) and 40% acetonitrile. The flow rate was set at 1.0 mL/min, and the injection volume was 10 μL. The detection was carried out at 230 nm using a photodiode array detector, and the total run time was 4 min. The proposed method was validated according to International Council for Harmonisation (ICH) guidelines for specificity, linearity, precision, accuracy, robustness, and solution stability. The method is linear over the range of 125–750 μg/mL for MET, 1.25–7.5 μg/mL for DAP, and 0.625–3.75 μg/mL for SAX. The observed correlation coefficients (R²) for MET, DAP, and SAX are >0.999. The proposed method is precise, and the percentage relative standard deviation was found to be between 0.4 and 0.8. The observed percentage recoveries were between 98.51 and 100.80 for all three compounds. The product was subjected to stress conditions of acid, base, oxidative, thermal, and photolytic degradation. The product was found to degrade significantly in oxidative, acid, and base hydrolysis degradation conditions, and the degradation products were well determined from the active peaks, thus proving the stability-indicating power of the method. The developed and validated stability-indicating reversed-phase-HPLC method was appropriate for quantitative determination of these drugs in pharmaceutical preparations and also for quality control in bulk manufacturing.     

Acridine N-Heterocyclic Carbene Gold(I) Compounds: Tuning from Yellow to Blue Luminescence

The synthesis and the luminescence features of three gold(I)-N-heterocyclic carbene (NHC) complexes are presented to study how the n-alkyl group can influence the luminescence properties in the crystalline state. The mononuclear gold(I)-NHC complexes, [( L¹ )Au(Cl)] ( 1 ), [( L² )Au(Cl)] ( 2 ), and [( L³ )Au(Cl)] ( 3 ) were isolated from the reactions between [(tht)AuCl] and corresponding NHC ligand precursors, [N-(9-acridinyl)-N’-(n-butyl)-imidazolium chloride, ( L¹ .HCl)], [N-(9-acridinyl)-N’-(n-pentyl)-imidazolium chloride, ( L² .HCl)] and [N-(9-acridinyl)-N’-(n-hexyl)-imidazolium chloride, ( L³ .HCl)]. Their single-crystal X-ray analysis reveals the influence of the n-alkyl groups on solid-state packing. A comparison of the luminescence features of 1 – 3 with n-alkyl substituents is explored. The molecules 1 – 3 depicted blue emission in the solution state, while the yellow emission (for 1 ), greenish-yellow emission (for 2 ), and blue emission (for 3 ) in the crystalline phase. This paradigm emission shift arises from n-butyl to n-pentyl and n-hexyl in the crystalline state due to the carbon-carbon rotation of the n-alkyl group, which tends to promote unusual solid packing. Hence n-alkyl group adds a novel emission property in the crystalline state. Density Functional Theory and Time-Dependent Density Functional Theory calculations were carried out for monomeric complex, N-(9-acridinyl)-N’-(n-heptyl)imidazole-2-ylidene gold(I) chloride and dimeric complex, N-(9-acridinyl)-N’-(n-heptyl)imidazole-2-ylidene gold(I) chloride to understand the structural and electronic properties.     

SO4−2/SnO2–catalyzed cyclocondensation for the synthesis of fully functionalized pyridines

An efficient and promising synthetic approach to assemble skeletons of multifunctionalized pyridine derivatives in presence of recyclable heterogeneous sulfated tin oxide (STO) catalyst has been evolved. The STO catalyst was used as a promoter for the cyclocondensation process in ethanol at 70°C. Overall performance of this catalyst was attributed to the cooperative contribution of its Lewis and Brønsted-Lowry acidic sites. Nanosized STO catalyst was synthesized by using sol-gel process and characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), ¹H-NMR, and scanning electron microscopy (SEM). This catalyst tolerates most of the substrates, and protocol shows precious capabilities consist of high yields, operational simplicity, less reaction time, and eco-friendly conditions. The newly synthesized heterogeneous catalyst was easily separated and reused. All the reactions are carried out for subsequent cycles without significant loss of catalytic activity and with good proficiency.