A new family of luminescent compounds: platinum(II) imidoylamidinates exhibiting pH-dependent room temperature luminescence

The imidoylamidinate platinum(II) compounds [Pt{NH=C(R)NC(Ph)NPh}2] (R = CH2Ph 2, p-ClC6H43, Ph 4) were prepared by the reaction of the appropriate trans-[PtCl2(RCN)2] with 4 equiv of the amidine PhC(NH)NHPh giving 2-4 and 2 equivs of the salt PhC(=NH)NHPh.HCl. We also synthesized, by the double alkylation of 4 with MeOSO2CF3, complex [Pt{NH=C(Ph)N(Me)C(Ph)=NPh}2][CF3SO3]2 (5) which models the bis-protonated form of 4. The complexes were characterized by 1H, 13C NMR, and IR spectroscopies, FAB-MS and by C, H, N elemental analysis. The X-ray crystallography of 4.2CH2Cl2 enables the confirmation of the square planar coordination geometry of the metal center with almost planar imidoylamidine ligands, while in 5.2CHCl3 the planarity of the metallacycles is lost and and the central N atom is sp3-hybridized. The imidoylamidinate complexes represent a new family of Pt(II)-based luminescent complexes and they are emissive at room temperature both in solution and in the solid state, with an emission quantum yield ranging from 3.7 x 10(-4) to 6.2 x 10(-2) in methanol solution; the emission intensity is pH-dependent, being quenched at low pH. UV-visible and luminescence spectroscopies indicate that the lowest excited state of these compounds is 3MLCT or 3IL with significant MLCT character, with emission lifetimes of a few micros. A blue shift of both the absorption and emission with increasing solvent polarity and with decreasing pi-electron withdrawing properties of the ligand substituent was observed.     

Co3(RL)2(hfac)6 ladder complex of 5-[4-(N-tert-butyl-N-aminoxyl)phenyl]pyrimidine

5-[4-(N-tert-butyl-N-aminoxyl)phenyl]pyridimine (4NITPhPyrim = RL) forms a 1-D ladder polymer complex with Co(hfac)2 of stoichiometry Co3(RL)2(hfac)6, having antiparallel [Co(II)RL]n linear chains (rails) that are cross-linked by Pyrim-Co(hfac)2-Pyrim rungs. The magnetic behavior above 100 K is consistent with contributions from one high-spin Co(II) ion (the cross-link, S = 3/2) plus two Co-ON units with strongly antiferromagnetic (AFM) metal-radical exchange (each S = 1). The chiT data show an AFM downturn as the temperature drops. Assuming weak exchange along chain portions of the polymer due to poor spin polarization across the phenyl-pyrimidine bond in RL, a linear three-spin (S = 1, 3/2, and 1) fit to the T > 18 K data yields an AFM cross-linker (rung) effective exchange of J(CL)/k = (-)5.3 K = (-)3.7 cm(-)(1). Superexchange (sigma-orbital overlap) is a likely mechanism for the effective AFM exchange between CoON and Co spin sites in the three-spin groupings.     

Kinetic and thermodynamic aspects of the regioselective addition of bifunctional hydroxylaminooxime-type HO-nucleophiles to Pt-complexed nitriles

The coupling between coordinated propiononitriles in trans-[PtCln(EtCN)2] (n = 2, 4) and the 1,2-hydroxylaminooximes HON(H)CMe2C(R)=NOH (R = Ph 1, Me 2) proceeds smoothly in CHCl(3) at ca. 40-45 degrees C and gives trans-[PtCln{NH=C(Et)ON(H)CMe2C(R)=NOH}2] (n = 2, R = Ph 5, Me 6; n = 4, R = Ph 7, Me 8) in 80-85% isolated yields. The reaction is highly regioselective, and both spectroscopic (IR; FAB+-MS; 1D 1H, 13C{1H}, and 195Pt NMR; and 2D 1H,13C HMQC, 1H,13C HMBC, and 1H,15N HMQC NMR) and X-ray data for 6-8 suggest that the addition proceeds exclusively via the hydroxylamine moiety of the 1,2-hydroxylaminooxime species; the existence of an oxime group remote from the nucleophile was also confirmed. Heating of 6 in air leads to its conversion to the unusual nitrosoalkane complex [PtCl2{HON=C(Me)C(Me)2N=O}] (9), whereas in the case of 5, only the metal-free salt [H3NC(Me)2C(Ph)=NOH]2(NO3)Cl.H2O (10) was isolated. To compare the kinetic aspects and trends in the addition of both types of nucleophiles (oximes and hydroxylamines; for the latter, see our recent work: Inorg. Chem. 2005, 44, 2944) to coordinated nitriles, a kinetic study of the addition of HON=C(CH2Ph)2 to [Ph3PCH2Ph][PtCl5(EtCN)] (11) to give [Ph(3)PCH(2)Ph][PtCl(5){NH=C(Et)ON=C(CH2Ph)2}] (12) was performed. The calculated rate constant k2 of 3.9 x 10(-6) M(-1) s(-1) at -20 degrees C for the addition of the oxime indicates that the hydroxylamine is, by a factor 1.7 x 10(4), more reactive toward the addition to nitriles than the oxime. Results of the synthetic, kinetic, and theoretical (at the B3LYP level of theory) studies have demonstrated that the high regioselectivity of the reactions of the 1,2-hydroxylaminooximes with ligated nitriles is both kinetically and thermodynamically controlled.     

Simple highly modular acyclic amine-catalyzed direct enantioselective addition of ketones to nitro-olefins

Simple, highly modular primary amino acid derivatives catalyze the direct enantioselective addition of ketones to nitro-olefins with high stereocontrol and furnish the corresponding aldol products in high yield with up to >38 1 dr and up to 99% ee.     

An unprecedented heterotrimetallic Fe/Cu/Co core for mild and highly efficient catalytic oxidation of cycloalkanes by hydrogen peroxide

An unprecedented hexanuclear heterotrimetallic Fe/Cu/Co complex bearing two Cu(mu-O)2Co(mu-O)2Fe cores is easily prepared by self-assembly and acts as a remarkable catalyst for the peroxidative oxidation of cycloalkanes under mild conditions.     

Reversible hydrophobization and lipophobization of cellulose fibers via trifluoroacetylation

The surface modification of cellulose fibers with trifluoroacetic anhydride (TFAA) was studied using the heterogeneous cellulose/TFAA/pyridine/toluene system. The degree of substitution (DS) of the ensuing trifluoroacetylated fibers ranged from 0.04 to 0.30. This treatment conferred a high degree of both hydrophobicity and lipophobicity on the fibers' surface, even at low DS values. Both the dispersive and the polar contributions to the surface energy were drastically reduced. However, the original cellulose hydrophilicity could be readily restored through hydrolysis, by treating the modified fibers with neutral water.     

Comparison between DAX-8 and C-18 solid phase extraction of rainwater dissolved organic matter

Rainwater is a very low concentrated matrix and, for dissolved organic matter (DOM) characterization, an efficient extraction procedure is essential. Isolation procedures based on the adsorption onto XAD-8 and C-18 sorbents have been used in the literature for rainwater DOM isolation, but a comparison between these procedures is lacking. In this work, UV-visible and molecular fluorescence spectroscopies highlighted differences between rainwater DOM isolated by DAX-8 (replacement for XAD-8) and by C-18. It was possible to recover higher rainwater DOM percentage by the C-18 based procedure than by the DAX-8 one. Rainwater protein-like compounds were better concentrated by the C-18 procedure than by the DAX-8 one, while humic-like compounds were similarly concentrated by both procedures. Furthermore, rainwater DOM extracted by the C-18 procedure was more representative of the global matrix, while DAX-8 preferentially extracted humic-like compounds.     

Estimation of urban traffic conditions using an Automatic Vehicle Location (AVL) System

The aim of this paper is to develop an Information Extension Model (IEM) which uses location data of bus fleets (AVL data) to estimate road traffic conditions and provide input for implementing control strategies. The IEM consists of three sub-models: the Link Traffic Condition Model (LTCM), the AVL Adaptation Model (AVLAM) and the Network Traffic Condition Model (NTCM). The first provides road traffic conditions as a function of mass-transit traffic conditions in the case of shared lanes, the second provides mass-transit traffic conditions as a function of AVL data, and the last provides road traffic conditions over the whole road network as a function of mass-transit traffic conditions.     

Shape measurement by a multi-view methodology based on the remote tracking of a 3D optical scanner

Full field optical techniques can be reliably used for 3D measurements of complex shapes by multi-view processes, which require the computation of transformation parameters relating different views into a common reference system. Although, several multi-view approaches have been proposed, the alignment process is still the crucial step of a shape reconstruction.In this paper, a methodology to automatically align 3D views has been developed by integrating a stereo vision system and a full field optical scanner. In particular, the stereo vision system is used to remotely track the optical scanner within a working volume. The tracking system uses stereo images to detect the 3D coordinates of retro-reflective infrared markers rigidly connected to the scanner. Stereo correspondences are established by a robust methodology based on combining the epipolar geometry with an image spatial transformation constraint.The proposed methodology has been validated by experimental tests regarding both the evaluation of the measurement accuracy and the 3D reconstruction of an industrial shape.