Photosensitization reaction-induced acute electrophysiological cell response of rat myocardial cells in short loading periods of talaporfin sodium or porfimer sodium

Electrophysiological responses of rat myocardial cells to exogenous photosensitization reactions for a short period of incubation with two photosensitizers, talaporfin sodium or porfimer sodium, were measured in a subsecond time scale. The loading period of the photosensitizer when the photosensitizer might not be taken up by the cells was selected as 15min, which was determined by the fluorescence microscopic observation. We measured the intracellular Ca(2+) concentration ([Ca(2+) ](in) ) by using a fluorescent Ca(2+) indicator, Fluo-4 AM, under a high-speed confocal laser microscope to evaluate the acute electrophysiological cell response to the photosensitization reaction. The measured temporal change in Fluo-4 fluorescence intensity indicated that the response to the photosensitization reaction might be divided into two phases in both photosensitizers. The first phase is acute response: disappearance of Ca(2+) oscillation when irradiation starts, which might be caused by ion channel dysfunction. The second phase is slow response: [Ca(2+) ](in) elevation indicating influx of Ca(2+) due to the concentration gradient. The continuous Ca(2+) influx followed by changes in cell morphology suggested micropore formation on the surface of the cell membrane, resulting in necrotic cell death.     

Synthetic procedure for N-fmoc amino acyl-N-sulfanylethylaniline linker as crypto-Peptide thioester precursor with application to native chemical ligation

N-Sulfanylethylanilide (SEAlide) peptides 1, obtainable using Fmoc-based solid-phase peptide synthesis (Fmoc SPPS), function as crypto-thioesters in native chemical ligation (NCL), yielding a wide variety of peptides/proteins. Their acylating potential with N-terminal cysteinyl peptides 2 can be tuned by the presence or absence of phosphate salts, leading to one-pot/multifragment ligation, operating under kinetically controlled conditions. SEAlide peptides have already been shown to be promising for use in protein synthesis; however, a widely applicable method for the synthesis of N-Fmoc amino acyl-N-sulfanylethylaniline linkers 4, required for the preparation of SEAlide peptides, is unavailable. The present study addresses the development of efficient condensation protocols of 20 naturally occurring amino acid derivatives to the N-sulfanylethylaniline linker 5. N-Fmoc amino acyl aniline linkers 4 of practical use in NCL chemistry, except in the case of the proline- or aspartic acid-containing linker, were successfully synthesized by coupling of POCl(3)- or SOCl(2)-activated Fmoc amino acid derivatives with sodium anilide species 6, without accompanying racemization and loss of side-chain protection. Furthermore, SEAlide peptides 7 possessing various C-terminal amino acids (Gly, His, Phe, Ala, Asn, Ser, Glu, and Val) were shown to be of practical use in NCL chemistry.     

Hydrothermal synthesis of spinel Li1+x Mn2O4 as cathode material for rechargeable lithium battery

Abstract

The hydrothermal synthesis of Li-Mn spinel oxide (Li_1+xMn₂O₄) was undertaken in order to develop high quality, low cost cathode material for a rechargeable lithium battery. In our experiments, γ-MnOOH, LiOH · H₂O and H₂O₂ were used as starting materials to synthesize Li-Mn spinel oxide under hydrothermal conditions of 180-230°C and about 1.0-2.8 MPa. The chemical composition and particle size of the Li_1+xMn₂O₄ is easily controlled in the hydrothermal reaction. The Li_1+xMn₂O₄ produced was characterized by X-ray diffraction, with the spinel phase having a Li/Mn ratio of 0.50-0.60. There is convincing evidence, as a result of this work, that our synthesis process is most suitable for producing high quality cathode material that can be used in a rechargeable lithium battery.     

4-Methoxybenzyloxymethyl group, a racemization-resistant protecting group for cysteine in Fmoc solid phase peptide synthesis

The 4-methoxybenzyloxymethyl (MBom) group was introduced for sulfhydryl protection of Cys in combination with Fmoc chemistry. The MBom group proved to substantially suppress racemization of Cys during its incorporation mediated by phosphonium or uronium reagents. Furthermore, this group was found to significantly reduce racemization of the C-terminal Cys linked to a hydroxyl resin during repetitive base treatment, in comparison with the usually used trityl (Trt) and acetamidomethyl (Acm) groups.     

Total synthesis of marinostatin, a serine protease inhibitor isolated from the marine bacterium Pseudoallteromonas sagamiensis

Marinostatin (MST) (1) isolated from a marine organism is a serine protease inhibitor consisting of 12 amino acids with two internal ester linkages that are formed between the β-hydroxyl and β-carboxyl groups, Thr³-Asp⁹ and Ser⁸-Asp¹¹. We synthesized MST by a regioselective esterification procedure employing two sets of orthogonally removable protecting groups at the side-chains of Asp and Ser/Thr. We optimized the esterification conditions to preferentially form the intramolecular ester linkages without any significant aspartimide (Asi) formation at Asp⁹ and Asp¹¹. The inhibitory potency of the synthetic MST against subtilisin (Ki, 0.6 nM) was comparable with a reported value for native MST (1.5 nM).     

Monitoring of vitamin C species in aqueous solution by flow injection analysis coupled with an on-line separation with reversed-phase column

Two vitamin C species of ascorbic acid and dehydroascorbic acid in aqueous solution were monitored by flow injection analysis. Ascorbic acid and dehydroascorbic acid were resolved by a reversed-phase column, and dehydroascorbic acid was reduced to ascorbic acid by an on-line post-column reaction with dithiothreitol. Both natural and reduced ascorbic acids were photometrically detected at 260 nm, and the two vitamin C species were simultaneously determined. The determination range was from 0 to 8 × 10⁻⁵ M with a limit of detection of 1.7 × 10⁻⁶ M. The proposed method was applied to the conversion monitoring of ascorbic acid and dehydroascorbic acid in weakly acidic to weakly alkaline aqueous solutions, as well as to the determination of the vitamin C in some beverage samples.     

Recovery process of respiratory muscle strength in patients following stroke: A Pilot Study

Objective: To determine the recovery process of respiratory muscle strength during 3 months following stroke, and to investigate the association of change in respiratory muscle strength and physical functions. Additionally, we compared respiratory muscle strength with those of healthy subjects. Method: In this prospective, observational study, 19 stroke patients and 19 healthy subjects were enrolled. Maximal inspiratory pressure (MIP), maximal expiratory pressure (MEP), motricity index, trunk control test, 6-minute walk test (6MWT) and functional independence measure were assessed at 1, 2, and 3 months from stroke onset in stroke patients. MIP and MEP were assessed at arbitrary times in healthy subjects. Repeated one-way analysis of variance with Bonferroni post-hoc test was used to compare the change in respiratory muscle strength in each period in stroke patients. Pearson''s correlation coefficient was computed for changes in respiratory muscle strength and physical functions. Student''s t-test was used to compare respiratory muscle strength between stroke patients at 3 months from onset and healthy subjects. Results: MIP was significantly increased at 3 months compared to 1 month. MEP was significantly increased in 2 months and 3 months, compared to 1 month. MIP changes associated with 6MWT changes. Compared to healthy subjects, MIP and MEP at 3 months were significantly lower in stroke patients. Conclusion: Respiratory muscle strength significantly increased during 3 months following stroke. However, the trend of recovery may be different. MIP changes may associated with walking endurance changes. During 3 months following stroke, respiratory muscle strength did not recover to healthy subjects.     

Photocatalytic redox-neutral hydroxyalkylation of N-heteroaromatics with aldehydes

Hydroxyalkylation of N-heteroaromatics with aldehydes was achieved using a binary hybrid catalyst system comprising an acridinium photoredox catalyst and a thiophosphoric acid organocatalyst. The reaction proceeded through the following sequence: (1) photoredox-catalyzed single-electron oxidation of a thiophosphoric acid catalyst to generate a thiyl radical, (2) cleavage of the formyl C–H bond of the aldehyde substrates by a thiyl radical acting as a hydrogen atom transfer catalyst to generate acyl radicals, (3) Minisci-type addition of the resulting acyl radicals to N-heteroaromatics, and (4) a spin-center shift, photoredox-catalyzed single-electron reduction, and protonation to produce secondary alcohol products. This metal-free hybrid catalysis proceeded under mild conditions for a wide range of substrates, including isoquinolines, quinolines, and pyridines as N-heteroaromatics, as well as both aromatic and aliphatic aldehydes, and tolerated various functional groups. The reaction was applicable to late-stage derivatization of drugs and their leads.

Hydroxyalkylation of N-heteroaromatics with aldehydes was achieved using a binary hybrid catalyst system comprising an acridinium photoredox catalyst and a thiophosphoric acid organocatalyst.