Grafting on Some Phenolic Copolymer Chains

A phenolic copolymer has been prepared by copolymerization of p-chlorophenol, p-cresol, and formaldehyde in the presence of acid catalyst. The copolymer was partially and completely dehalogenated by a standard method. The dehalogenated copolymer chain had a random distribution of reactive positions which were originally occupied by Cl atoms. Some substituted monomers, oligomers of known structure and molecular weight, and basic polymer chains have been grafted at these reactive positions. The halogen percentage of the grafted copolymers could be calculated on the assumption that all the available reactive positions are attached to the respective units. Reasonably good agreement has been found between the calculated and observed amount of halogen percentage in the grafted copolymers.     

Immunomagnetic nanoparticle based quantitative PCR for rapid detection of Salmonella

We have developed a rapid and sensitive method for immunomagnetic separation (IMS) of Salmonella along with their real time detection via PCR. Silica-coated magnetic nanoparticles were functionalized with carboxy groups to which anti-Salmonella antibody raised against heat-inactivated whole cells of Salmonella were covalently attached. The immuno-captured target cells were detected in beverages like milk and lemon juice by multiplex PCR and real time PCR with a detection limit of 10⁴ cfu.mL^?1 and 10³ cfu.mL^?1, respectively. We demonstrate that IMS can be used for selective concentration of target bacteria from beverages for subsequent use in PCR detection. PCR also enables differentiation of Salmonella typhi and Salmonella paratyphi A using a set of four specific primers. In addition, IMS—PCR can be used as a screening tool in the food and beverage industry for the detection of Salmonella within 3–4 h which compares favorably to the time of several days that is needed in case of conventional detection based on culture and biochemical methods.

Cyclisation of Ortho -Cyclohexenyl Phenols via Epoxidation #

A number of ortho -cyclohexenyl phenols 2(a–i) have been cyclised by treatment with one equivalent of m-chloroper-oxybenzoic acid in refluxing benzene for 4 h to furnish linearly fused 1-hydroxy-1,2,3,4,4a,9a-hexahydrodibenzofurans 3(a–i) (70–80%) and bicyclic 3-hydroxy-1,3-ethanochromans 4(a–f) (10–20%). Products 3(a–i) were oxidised with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (excess) in refluxing dry xylene for 6 h to give 2,3-dihydrodibenzofuran-1 (2H)-ones 6(a–i) (85–95%).

     

A Mild and Efficient Route to 3-Vinylchromones in Aqueous Micellar Media

A simple, mild, and ecofriendly method has been developed for the synthesis of 3-vinylchromones from 4-oxo-4H-1-benzopyran-3-carboxaldehyde (3-formylchromone) by simple Knoevenagel condensation with various active methylene compounds (AMC) in aqueous micellar media in the presence of catalytic amounts of cetyl trimethylammonium bromide (CTAB) and 1,4-diazabicyclo[2.2.2]octane (DABCO). In the case of malonic acid as AMC, the reaction resulted in formation of only Doebner decarboxylated products under the standard reaction condition. It has been also observed that 3-formylchromone derivatives primarily undergo tandem Knoevenagel and Michael reactions in the presence of > 2 equiv. of ethyl acetoacetate to produce benzophenone derivatives, by opening of pyran ring, as the sole product in good yields.     

Radioanalytical separation and size-dependent ion exchange property of micelle-directed titanium phosphate nanocomposites

Nanocomposite titanium-phosphate (TiP) of different sizes was synthesized using Triton X-100 (polyethylene glycol-p-isooctylphenyl ether) surfactant. The materials were characterized by FTIR and powdered X-ray diffraction (XRD). The structural and morphological details of the material were obtained by scanning electron microscopy (SEM) and transmission electron microscopy. The SEM study was followed by energy dispersive spectroscopic analysis for elemental analysis of the sample. The important peaks of the XRD spectra were analyzed to determine the probable composition of the material. The average size distribution of the particles was determined by dynamic light scattering method. Ion exchange capacity was measured for different metal ions with sizes of the TiP nanocomposite and size-dependent ion exchange property of the material was investigated thoroughly. The nanomaterial of the smallest size of around 43 nm was employed to separate carrier-free ^137mBa from ¹³⁷Cs in column chromatographic technique using 1.0 M HNO₃ as eluting agent at pH 5.     

Sorptive elimination of fluoride from contaminated groundwater in a fixed bed column: A kinetic model validation based study

The current investigation involves a continuous adsorption experiment in a packed bed column for the sorptive elucidation of fluoride from contaminated groundwater using an activated soil-clay mixture. Through the combination of naturally accessible laterite soil with silica enriched clay (3:1 ratio), a low-cost Al–Si heterogeneous material has been developed. Following detailed characterization, the developed materials were employed in a long-time column process to achieve a high degree of fluoride separation from real-world groundwater. In a packed bed column investigation, the effect of bed height, initial fluoride concentration, and flow rate on the breakthrough properties of the adsorption system were investigated. By using a non-linear regression equation, three model kinetics, such as the Thomas Model, Adams-Bohart Model, and Yoon-Nelson Model, were fitted to validate the column-based experimental data, by analysing the breakthrough curves profiles, and distinct kinetic parameters. The Bed Depth Service Time Analysis (BDST) model was tested to express the effect of bed height on breakthrough curves, as well as to predict the time for breakthrough, and material depletion under optimal conditions. The Thomas and Yoon-Nelson models were identified to be the most appropriate ones for describing the entire breakthrough curve, whereas the Adams-Bohart model was only utilised to predict the first half of the dynamic process. With correlation coefficients (R²) 0.96, the experimental results were well suited to Thomas, Yoon-Nelson, and Adams-Bohart models. Finally, regeneration assessment was carried out where even after four cycles of operation, regenerated adsorbent showed a rejection efficacy of 78% to fluoride that proves the viability of the material and methodology.     

Improvement in the light conversion efficiency of silicon solar cell by spin coating of CuO,ZnO nanoparticles and CuO/ZnO mixed metal nanocomposite material

Synthesis of pure Zinc oxide (ZnO), Copper oxide (CuO) nanoparticles (NPs) and their (ZnO/CuO) nanocomposites (NCs) in 1:1 M ratio were successfully prepared by co-precipitation method. The structural properties of the as synthesized nanoparticles and nanocomposite materials were investigated using scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) techniques. Optical band-gap studies were done using UV–Visible absorption spectroscopy. Photovoltaic properties of pure ZnO NPs, CuO NPs and ZnO/CuO NCs coated over a single-crystalline silicon solar cell were carried out to compare improvement of light-conversion efficiency in coated solar cell. The maximum light conversion efficiencies were found to be of 8.02% for CuO (3 mg/ml concentration) and 7.28% for ZnO NPs (3 mg/ml concentration), whereas that of mixed metal nanocomposite CuO/ZnO NCs was found to be 7.62%. at very low concentration of 1 mg/ml. This indicates with low concentration of mixed metal NCs an improvement in light efficiency can be obtained. The enhancement in efficiency could be due to formation of p - n heterojunction by CuO/ZnO NCs composites which enhances the number of electrons and holes participating in conduction on the surface.     

Protected nodes and the collapse of Fermi arcs in high-T{c} cuprate superconductors

Angle resolved photoemission on underdoped Bi2Sr2CaCu2O8 reveals that the magnitude and d-wave anisotropy of the superconducting state energy gap are independent of temperature all the way up to T{c}. This lack of T variation of the entire k-dependent gap is in marked contrast to mean field theory. At T{c} the point nodes of the d-wave gap abruptly expand into finite length "Fermi arcs." This change occurs within the width of the resistive transition, and thus the Fermi arcs are not simply thermally broadened nodes but rather a unique signature of the pseudogap phase.     

Stereospecific Formal [3+2] Dipolar Cycloaddition of Cyclopropanes with Nitrosoarenes: An Approach to Isoxazolidines

The MgBr₂‐catalyzed formal [3+2] cycloaddition of donor–acceptor activated cyclopropanes with nitrosoarenes offers a novel approach to various structurally diverse isoxazolidines. The reactions, which are experimentally easy to conduct, occur with complete stereospecificity and perfect control of regioselectivity. Product isoxazolidines can be readily transformed into α‐amino lactones by reductive or decarboxylative N? O cleavage and subsequent lactonisation, and the N‐aryl bond cleavage is also possible under oxidative conditions.     

Dye sensitization of a large band gap semiconductor by an iron(III) complex

The Fe(III) complex, [Fe^III(HQS)₃] (HQS = 8-hydroxyquinoline-5-sulfonic acid), is found to effect sensitization of the large band gap semiconductor, TiO₂. The role of interfacial electron transfer in sensitization of TiO₂ nanoparticles by surface adsorbed [Fe^III(HQS)₃] was studied using femtosecond time scale transient absorption spectroscopy. Electron injection has been confirmed by direct detection of the electron in the conduction band. A TiO₂-based dye-sensitized solar cell (DSSC) was fabricated using [Fe^III(HQS)₃] as a sensitizer, and the resulting DSSC exhibited an open-circuit voltage value of 425 mV. The value of the short-circuit photocurrent was found to be 2.5 mA/cm². The solar to electric power conversion efficiency of the [Fe^III(HQS)₃] sensitized TiO₂-based DSSC device was 0.75 %. The results are discussed in the context of sensitization of TiO₂ by other Fe(II)-dye complexes.